How to install win10 on MSI b360m mortar motherboard? Why can't I install it?

php editor Xiaoxin will answer your question about installing Win10 on the MSI B360M mortar motherboard. Installing Win10 usually follows the following steps: First, ensure that the motherboard and hardware are connected properly, enter the BIOS and set the startup item to a USB flash drive, insert the USB flash drive and restart the computer, and follow the on-screen prompts to install. If you encounter problems that cannot be installed, you can try to update the motherboard driver or BIOS version, or check whether the USB flash drive is normal. If the problem is still not resolved, you can check the MSI official website or contact after-sales technical support for help.

How to install win10 on MSI b360m mortar motherboard? Why can't I install it?

Download the win10 image

Insert the USB flash drive and burn the image through floppy disk

Enter bios and change the boot mode to UEFI

Enter the quick startup option and select the USB disk to boot

After that, it is the same as installing the software

What system is best to install on MSI b360m?

The answer is that it is better to install win10 system on MSI b360m.

The b360 motherboard does not support the old system win7, but only supports the new system win10. As a user, it is better to adapt to the win10 system for the performance of the new host.

But if you still want to use the old system win7, you can switch to MSI b365 motherboard. After all, the performance of ninth-generation processors is much better than the old 4th- to 7th-generation processors, and it can run the win7 system faster.

Can MSI motherboard 360M MORTAR (MS-7B23) install WIN7 system?

You can install Windows 7 system, but it is still recommended to install Win10 system, because Windows 10 system is relatively more suitable for this motherboard.

Why can’t my m.2 solid state be used as a system disk? Is the motherboard MSI b360m mortar?

First of all, you must set the solid-state priority boot in the BIOS

Secondly, the PE environment version of the installation system must be higher before you can install WIN10

Generally, you need a higher version of WIN8 or above PE

Does MSI B360M not support WIN7 system?

Hello, MSI B360M motherboard supports Windows 7 system, but you need to pay attention to the following points:

1. You need to use the latest version of BIOS to ensure compatibility.

2. You need to manually add the USB 3.0 driver when installing Windows 7 system, otherwise the USB device may not be recognized.

3. You need to use UEFI boot method instead of traditional BIOS boot method.

4. You need to set the motherboard SATA mode to AHCI mode before installing Windows 7 system.

In short, if you want to install Windows 7 system on MSI B360M motherboard, you need to make the above preparations.

MSI motherboard does not display the logo when it is turned on

If the motherboard LOGO screen does not appear, it is because it is turned off in the CMOS setting. It can be turned on, but it needs to be turned off when the computer has a power-on self-test problem. .

Processing:

Continuously press the DEL key (F2 or other designated hotkey for laptops) when turning on the computer to enter the CMOS setting interface, and set the Full Screen LOGO Show in the Advanced BIOS Features tab. LOGO), then press F10 to save, exit and restart.

How to install solid state drive in MSI b360m?

Installing a solid state drive (ssd) is mainly divided into three steps:

1. Preparation stage:

a. Turn off the computer and unplug the power cord to ensure safe operation.

b. Use a suitable screwdriver to open the side panel of the chassis. Please note that each chassis may be different, so you will need to operate according to your own chassis type.

2. Install the solid state drive:

a. Find the m.2 slot on the motherboard. MSI b360m motherboards usually have m.2 slots for installing SSDs.

b. Align the SSD with the connector by gently inserting it into the m.2 slot. The metal connector on the SSD should fit into the bottom of the slot and match the keying on the slot.

c. Press the SSD down to ensure it is securely seated in the slot. And fix one side of the solid state drive to the motherboard with screws.

3. Connect and shut down the computer:

a. Find the sata data cable on the motherboard and connect one end to the sata interface of the solid state drive.

b. Use a sata power cable to connect the solid state drive to the power supply. Make sure the power cord is properly connected to the power interface of the solid state drive.

c. After making sure all connections are secure, check all cable connections again and make sure nothing is loose or damaged.

d. Close the chassis side panel and reinsert the power cord.

e. Start the computer and your SSD should have been successfully installed.

Please note that before proceeding with the installation, make sure you have read and understood the MSI b360m motherboard user manual and the SSD installation instructions in order to perform these steps correctly. If you are unsure about the operation, it is recommended to consult professionals or seek relevant technical support.

The above is the detailed content of How to install win10 on MSI b360m mortar motherboard? Why can't I install it?. For more information, please follow other related articles on the PHP Chinese website!