Home > Article > Computer Tutorials > What are the shortcut keys for restarting the system on Yeston motherboard H61c? Yeston?
php Editor Strawberry Yeston H61c motherboard H61c when reinstalling the system, what are the shortcut keys? The shortcut key for reinstalling the system of Yeston motherboard H61c is F11. By pressing the F11 key, you can quickly enter the boot menu and select a USB flash drive or CD to reinstall the system. This shortcut key is simple and convenient to operate, making users more efficient and faster when reinstalling the system.
After booting, press the F12 key to bring up the boot menu, select the U disk to boot, and then you can install the system (of course the premise is to first make the U disk a bootable disk and prepare the system files) .
This has nothing to do with the motherboard. Most motherboards support it. Enter BOIS and set the first boot to usb-hdd, or keep pressing f2 while booting. Or if a selection prompt appears on f12, select usb-hdd
F8.
The steps for installing the system from the Yingtong motherboard U disk are as follows:
1. First, make a bootable U disk with the win system.
2. Install the Yingtong motherboard computer on which the system needs to be installed. Insert the boot USB disk into the USB interface. After restarting, press the F8 shortcut key to open the boot menu. Select the USB disk option and press Enter, such as General UDisk 5.00. For computers that do not support the startup key, check the second point to set the U disk boot method;
3. After booting from the U disk, enter this interface, use the direction keys to select the option and press Enter, or you can directly press the numeric key 2 to boot into the pe system.
4. After entering the pe system, the system will automatically install it and the installation will be completed in about 20 minutes.
U disk installation system, different motherboards, setting bios boot method is slightly different, Yingtong motherboard, start by pressing F8 to enter the bios settings boot to U disk boot, otherwise, use u hero to boot the U disk Install PE. Enter PE, run the virtual CD-ROM drive, load the system image that needs to be installed, and then run the Windows installation tool on the desktop. Select the virtual CD-ROM drive just loaded. There is a simple way to start the installation, but the U disk space needs to be large enough, so use u large After Xia installed the PE on the USB flash drive, copy the system image to the GHO folder of the USB flash drive, enter the PE, directly run uDaxiape one-click installation, and follow the prompts below to complete the system installation.
Analysis of the shortcut hotkeys for Yeston motherboard settings to boot from the hard disk: The shortcut keys for Yeston motherboards produced before 2011 are: F8 The shortcut keys for Yeston motherboards produced after 2011 are: F111. First, boot using u Insert the U disk created by the U disk boot disk creation tool into the USB port of the computer host (it is recommended to insert the U disk into the USB port at the rear of the host box, because the transmission performance is more direct than the front one), and then turn on the computer!
2. After turning on the computer, when you see the startup screen, continuously press the "F11" key on the keyboard (if you are using a Yeston motherboard produced after 2011, the shortcut key is F11).
3. When you press the shortcut hotkey F11 continuously, you will enter a window for selecting the order of startup items. After entering, move the cursor to the second option which is "U disk boot", and the first The option is "Start from your computer's local hard drive".
4. u startup prompt: If the default option is not the u disk, then please move the cursor to the identified u disk.
5. After moving the cursor to the U disk option position, we can directly press the Enter key "Enter" to enter the U disk boot. Prerequisites for operation: You must first insert the U disk that has been used to create a boot disk using U boot into the USB interface of the computer host, and then restart the computer.
Press the Del key. The method is as follows
1. First, during the power-on self-test process, press the Del key to enter the BIOS.
2. Press the → direction key to switch to Advanced, press the ↓ direction key to select Legacy USB Support, and press the Enter key to set it to Enhanced.
3. Then press the ↑ direction key to select USB Configuration, press Enter to enter, and set SATA Mode to IDE Mode.
After inserting the U disk, first enter the BIOS---Advanced BIOS Feature menu---First boot device, and set the first boot item to USB-HDD.
If there is no USB related setting item in the First boot device, it means that the BIOS treats the USB flash drive as a hard disk.
At this time, we need to set the U disk as the first boot item in the Advanced BIOS Feature menu---Hard disk boot priority, press F10 to save and restart.
The above is the detailed content of What are the shortcut keys for restarting the system on Yeston motherboard H61c? Yeston?. For more information, please follow other related articles on the PHP Chinese website!