search
HomeComputer TutorialsTroubleshootingThe power supply is normal, but the motherboard is not receiving power and the power supply fan is not spinning. What is going on?

The power supply is normal, but the motherboard is not receiving power and the power supply fan is not spinning. What is going on?

Feb 20, 2024 pm 01:33 PM
Automatic restartPower supply is normalThe motherboard is not powered onThe power fan doesn’t spin eitherHow is this going?

php editor Xigua pointed out that when the power supply is normal but the motherboard does not receive power and the power fan does not spin, it may be caused by a power line failure, a motherboard failure, a loose power interface, etc. Solutions include checking the power line, replacing the motherboard, replugging the power interface, etc. If the problem is still not resolved, it is recommended to seek professional maintenance help to ensure the normal operation of the device.

The power supply is normal, but the motherboard is not receiving power and the power supply fan is not spinning. What is going on?

The power supply is normal, but the motherboard is not powered and the power supply fan is not spinning. What is going on?

The power supply is normal, but the motherboard is not powered on. The faulty part is usually the motherboard.

1. To determine whether it is a power problem, first unplug all the cables connected to the motherboard.

Find a paper clip.

Find a set of 24-pin (some are 20-pin) cables on the power supply, and find the green wire and the black wire. There is only one green wire and there are several black wires. Choose one close to the green wire. Just use any of the black ones!

Insert one end of the U-shaped paper clip into the green hole, and the other end into any black wire hole next to the green wire.

After inserting the paper clip, you can now connect the power cord and start powering on.

If the fan of the power supply is spinning at this time, it is basically possible to determine that there is no problem with the power supply.

If the fan of the power supply does not rotate, you can basically judge that there is a problem with the power supply and you need to replace the power supply and test it.

2. After detecting that the power supply is normal, use the power supply and the motherboard to turn on the computer separately. Use a screwdriver to short-circuit the power SW pin on the motherboard.

At this time, the motherboard is powered on and the power supply fan will rotate. Then, Add memory, graphics card, hard disk, and connecting cables at one time until the fault recurs and you can find out the faulty part that caused the motherboard to not power on. If the motherboard still does not power on, then the faulty part is the mainboard.

How to solve the problem when the fan socket of the computer power circuit board is out of power?

You obviously don’t have power supply, check the reason first, plug in the power supply first

Use tweezers to connect it, short-circuit it and see if the power fan rotates

Check If you turn the green one and one of the three black ones

, it proves that there is no problem with the power supply. Then plug in all the sockets and connect the motherboard power jumper with tweezers to see if it can start. If it can, it means that the hardware is basically faulty. The problem may be that the chassis button circuit is blocked.

If it does not transfer, it should be a motherboard problem or other circuit problem, which requires further inspection. At this time, you need to gradually replace other accessories and troubleshoot the problem.

Does the CPU fan stop after turning on the motherboard?

1. If you encounter the problem that the fan stops after spinning, you should check the memory module. The detection method is: unplug one root to test the boot status. If it can boot but won't restart, then it's a memory problem. If not, it's not a memory problem.

2. If there is no problem with the memory test, but the CPU fan still cannot be turned on or the CPU fan still stops and turns off, check whether the host power supply is good. The detection method is the replacement method. Use another new power supply to test. If it can be turned on, , if it restarts automatically, it is basically a power supply problem, no need to doubt it.

3. If it still cannot be solved, consider checking the motherboard problem. It may be that the motherboard has protection enabled.

4. If it can be turned on and then automatically restarts, it is likely to be a system problem. However, this problem is relatively rare and usually occurs on old computers. You can try reinstalling the system to see if it can work. solve.

The motherboard is powered on but does not light up, the fan does not spin and there is no movement. What is the problem?

The power supply is normal, but the motherboard is not powered on. The faulty part is usually the motherboard.

1. To determine whether it is a power problem, first unplug all the cables connected to the motherboard. Find a paper clip. Find a set of 24-pin (some are 20-pin) cables on the power supply, and find the green wire and the black wire. There is only one green wire and there are several black wires. Choose the black ones next to the green wire. Any one will do! Insert one end of the U-shaped paper clip into the green hole, and the other end into any black line hole next to the green line. After inserting the paper clip, you can now connect the power cord and start powering on. If the fan of the power supply is spinning at this time, it is basically possible to determine that there is no problem with the power supply. If the fan of the power supply does not rotate, it can basically be determined that there is a problem with the power supply, and the power supply needs to be replaced and tested.

2. After detecting that the power supply is normal, use the power supply and the motherboard to turn on the computer separately. Use a screwdriver to short-circuit the power SW pin on the motherboard. At this time, the motherboard is powered on and the power supply fan will rotate. Then add memory and graphics card at one time. , hard disk, connecting cable, until the fault recurs, you can find out the faulty part that caused the motherboard to not power on. If the motherboard still does not power on, then the faulty part is the mainboard.

The graphics card fan does not spin when the motherboard is powered on?

It may be caused by poor contact between the graphics card and the PCI-E slot of the motherboard. If there is no response at startup, check whether the graphics card is properly powered. If the graphics card is not powered properly or the power supply is insufficient, the graphics card cannot operate normally. Use the integrated graphics alone to see if it can be turned on normally. Uninstall the graphics card, clean the dust, and then install it to see if it can be used normally, or use a replacement. If you try to use the graphics card on other motherboards, the problem will be the same and troubleshoot the hardware problem.

The above is the detailed content of The power supply is normal, but the motherboard is not receiving power and the power supply fan is not spinning. What is going on?. For more information, please follow other related articles on the PHP Chinese website!

Statement
This article is reproduced at:系统之家重装系统. If there is any infringement, please contact admin@php.cn delete
The Elder Scrolls IV: Oblivion Remastered Fatal Error, Quick FixThe Elder Scrolls IV: Oblivion Remastered Fatal Error, Quick FixApr 25, 2025 pm 08:05 PM

Solving The Elder Scrolls IV: Oblivion Remastered Crashing Issues The Elder Scrolls IV: Oblivion Remastered, released April 22, 2025, for PS5, Xbox Series X/S, and Windows, boasts stunning visuals and improved gameplay. However, some players experien

Clair Obscur: Expedition 33 UE-Sandfall Game Crash? 3 Ways!Clair Obscur: Expedition 33 UE-Sandfall Game Crash? 3 Ways!Apr 25, 2025 pm 08:02 PM

Solve the UE-Sandfall game crash problem in "Clair Obscur: Expedition 33" "Clair Obscur: Expedition 33" has been widely expected by players after its release, but many players encountered the error of UE-Sandfall crashing and closing when starting the game. This article provides three solutions to help you smooth the game. Method 1: Change the startup options Change the Steam startup options to adjust game performance and graphics settings. Try setting the startup option to "-dx11". Step 1: Open the Steam library, find the game, and right-click to select "Properties". Step 2: Under the General tab, find the Startup Options section.

Broken Bluetooth After Windows 11 22H2 Update? Fix It nowBroken Bluetooth After Windows 11 22H2 Update? Fix It nowApr 25, 2025 pm 08:01 PM

Troubleshooting Bluetooth Issues After the Windows 11 22H2 Update Experiencing Bluetooth problems after updating to Windows 11 22H2? This guide provides solutions to restore your Bluetooth functionality. Issues like audio dropouts during calls (e.g

How to fix KB5057056 fails to install in Windows 10?How to fix KB5057056 fails to install in Windows 10?Apr 25, 2025 pm 08:00 PM

Microsoft employs a cycle of system updates in order to keep Windows systems stable and secure. An integral part of the cycle is Patch Tuesday, whereby Microsof

Clair Obscur Expedition 33 Controller Not Working on PC: FixedClair Obscur Expedition 33 Controller Not Working on PC: FixedApr 25, 2025 pm 06:01 PM

Solve the problem of failure of the PC version of "Clair Obscur: Expedition 33" Have you also encountered the problem that the PC version of the "Clair Obscur: Expedition 33" controller does not work properly? Don't worry, you are not alone! This article will provide you with a variety of effective solutions. "Clair Obscur: Expedition 33" has been launched on PlayStation 5, Windows and Xbox Series X/S platforms. This game is an engaging turn-based RPG that emphasizes precise timing. Its uniqueness is the perfect blend of strategic and rapid response. Smooth operation

How to fix Oblivion Remastered crashing on Windows?How to fix Oblivion Remastered crashing on Windows?Apr 24, 2025 pm 10:00 PM

Elder Scrolls IV: Oblivion Remastered has been rumored for several years now since the leak a few years prior. However, the developer of the original, Bethesda,

Resolved! Fix Oblivion Remastered out of Video Memory ErrorResolved! Fix Oblivion Remastered out of Video Memory ErrorApr 24, 2025 pm 08:11 PM

The "Oblivion Remastered out of video memory trying to allocate a texture" error is a frustrating issue preventing players from enjoying the game. This guide provides straightforward solutions to resolve this problem. This error can occur

Steam Destination Folder Must Be Empty? Here Are FixesSteam Destination Folder Must Be Empty? Here Are FixesApr 24, 2025 pm 08:10 PM

Encountering the "Destination folder must be empty" error during Steam installation? This common issue has a simple fix. This guide provides two solutions to get Steam up and running. Quick Navigation: Steam Installation Error: Destination

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

Video Face Swap

Video Face Swap

Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Tools

WebStorm Mac version

WebStorm Mac version

Useful JavaScript development tools

mPDF

mPDF

mPDF is a PHP library that can generate PDF files from UTF-8 encoded HTML. The original author, Ian Back, wrote mPDF to output PDF files "on the fly" from his website and handle different languages. It is slower than original scripts like HTML2FPDF and produces larger files when using Unicode fonts, but supports CSS styles etc. and has a lot of enhancements. Supports almost all languages, including RTL (Arabic and Hebrew) and CJK (Chinese, Japanese and Korean). Supports nested block-level elements (such as P, DIV),

EditPlus Chinese cracked version

EditPlus Chinese cracked version

Small size, syntax highlighting, does not support code prompt function

DVWA

DVWA

Damn Vulnerable Web App (DVWA) is a PHP/MySQL web application that is very vulnerable. Its main goals are to be an aid for security professionals to test their skills and tools in a legal environment, to help web developers better understand the process of securing web applications, and to help teachers/students teach/learn in a classroom environment Web application security. The goal of DVWA is to practice some of the most common web vulnerabilities through a simple and straightforward interface, with varying degrees of difficulty. Please note that this software

SublimeText3 English version

SublimeText3 English version

Recommended: Win version, supports code prompts!