Home  >  Article  >  Hardware Tutorial  >  The phone dropped and the screen didn’t respond.

The phone dropped and the screen didn’t respond.

王林
王林forward
2024-02-16 16:03:031048browse

The phone dropped and the screen didn’t respond.

What should I do if my phone accidentally drops and the screen fails?

1. When the phone screen fails, first we need to clean the phone screen. Static electricity may also cause the touch screen to malfunction. In this case, you only need to gently wipe the entire screen with your hand. Or you can try to remove the protective film to clean the screen.

2. The solution is as follows: 1: Turn off the phone, take out the battery, and let the phone sit for about five minutes. Find a USB data cable and connect it to your phone. Wash your hands, or wet your hands. With wet hands, touch the thumb of the same hand to the metal part of the other end of the USB cable, and press your index finger to the ground for about two seconds.

3. Turn off the phone, wait for a few minutes, then turn it on and try again. For phones with removable batteries, it is best to remove the battery together. Find a USB data cable, then connect the phone to the computer and try the effect again. Wash your hands or wet them before working on the screen.

What to do if the touch screen of Xiaomi phone fails after being dropped

Restart the phone to check the reaction; if the screen is accidentally damaged and malfunctions for a long time, go to the relevant repair shop to repair the problem Test, pay to replace a screen, or disassemble the phone and reinforce the internal cables to see if the response is restored.

First we open the settings of the phone and click to enter. Then in the More Settings list, click Select. Then find it and click to open it to fix the Xiaomi touch screen failure problem.

If this doesn't work, you can also wipe the screen with a slightly damp rag, because water can take away static electricity. Of course, another method is to use transparent tape. When the tape is peeled off, part of the static electricity can be taken away.

What should I do if the touch screen of Xiaomi mobile phone fails? If the screen of the mobile phone fails, first we need to clean the screen of the mobile phone. Static electricity on the mobile phone screen may also cause the touch screen to malfunction. At this time, you only need to gently clean the entire screen with your hands. Just wipe it off. Or you can try to remove the protective film to clean the screen.

The mobile phone has been used for too long, and there is a lot of garbage running in the background and on the phone. The entire system responds seriously slowly. When performing screen operations, the system does not respond in time, resulting in lags and failures.

What to do if the touch screen of your Huawei phone fails after being dropped

1. It is recommended that you bring the warranty certificate to the nearby Huawei Customer Service Center for repair. The actual repair price is based on the final price of the Huawei Customer Service Center. The inspection price shall prevail. Warm reminder: If you have not backed up your data before, there is a risk of data loss during maintenance.

2. It is recommended that you try not to use your phone while charging. If you must use your phone while charging, please use the original charger. At the same time, you can remove the protective case to improve the touch experience.

3. The screen unlocking fails after the phone is dropped. It is recommended that Huawei after-sales service be inspected and repaired. The following is the method for querying Huawei service center information: There is a service center module in the mobile service or membership service APP on Huawei mobile phones. You can query the nearest service center when connected to the Internet.

4. Complete failure, partial failure, and insensitivity of the touch screen: If the ambient temperature of the mobile phone you use is too low, the touch screen may become insensitive. This is affected by the physical characteristics of the screen device itself. It is recommended that you try your best to Keep the phone in an ambient temperature of 0℃-35℃.

5. Please consult the customer service center for specific fees. The method for querying Huawei customer service center address information is as follows: You can query the nearest service center through the "Service" page in the membership service APP that comes with your mobile phone. You can check the address of after-sales outlets at the bottom of the Huawei Mall official website.

The above is the detailed content of The phone dropped and the screen didn’t respond.. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:codercto.com. If there is any infringement, please contact admin@php.cn delete