Get the Mac hard drive to other computers (How to get the hard drive on Mac)

php editor Zimo will introduce to you how to use the Mac hard drive on other computers. After getting the Mac hard drive, we can use some tools and techniques to make it run normally on other computers. Such an operation can help us easily access and back up the data on the Mac hard drive when needed. Next, we will explain how to do it in detail so that you can easily master this technique.

Is it possible to install the mac system on an Apple computer, remove its hard disk and install it on an ordinary PC...

To install Black Apple, you need to meet the following requirements: First, the final It is best to use NVIDIA graphics cards, because Apple computers usually use N cards. Secondly, choose an Intel processor so that it is easier to find the driver after installation. Installing MAC OSX on an ordinary PC is called a black apple.

Some may not be supported and cannot be used. Therefore, it is not recommended to install the Apple system on ordinary computers.

No, because the virtual machine can only be used in a specific environment and is not a complete operating system. To install a MAC system, you can consider using Black Apple. Installing the system is relatively easy, but there may be challenges in terms of drivers. It once took me a week to successfully install the WIN MAC dual system. The main difficulty was installing the driver.

How to fix the problem that the mobile hard disk cannot be used on other computers after it is plugged into the Apple computer

Run -cmd, and then enter "chkdsk" in the pop-up dialog box F: /f", the first F corresponds to the character of your mobile hard disk, and the second f should be the first letter of "fix". After running, the system will check the disk error, wait 2~3 minutes, and the repair will be completed. The hard drive can be used normally.

On a Mac computer, open "Disk Utility", select the mobile hard drive to be formatted, click "Erase" at the top, a settings box will pop up, and select the format.

Press the F8 key when booting to enter safe mode, but you do not need to press any keys when exiting safe mode. In addition, Mac uses its own partition format, while Windows can only recognize NTFS, FAT32, FAT and RAW formats, so it cannot recognize Mac's partition format. This means that if your mobile hard drive uses the Mac partition format, it will not be recognized on Windows.

There is a problem with the first connected device. For example, poor contact of the data cable or hard disk may cause the connection to fail. You can try to test the connection on another computer. If successful, the problem lies in the second aspect. The second problem may be caused by a critical service being turned off or optimized by the software, or the service is not enabled in the pure version of the system.

Why can’t the hard disk be recognized on other win computers after connecting it to a mac?!_Baidu...

After exiting in safe mode, the MAC will use its own Partition format, which means that MAC will change the partition format of the mobile hard disk. However, under normal circumstances, Windows PC can only recognize NTFS, FAT32, FAT and RAW formats, and cannot recognize other formats.

2. If the "Disk Management" tool cannot solve your problem, you can use software like DiskGenius to solve it.

3. This prompt appears when booting, indicating that the SSD connection is successful. At this time, click Initialize... to open Disk Utility. Find the SSD in Disk Utility and its status will be displayed as uninitialized.

Conclusion: The above is all the content about getting the Mac hard drive to other computers compiled by this site. Thank you for taking the time to read the content of this site. I hope it will be helpful to you. Don’t forget to learn more related content. Find it on this site.

The above is the detailed content of Get the Mac hard drive to other computers (How to get the hard drive on Mac). For more information, please follow other related articles on the PHP Chinese website!