Home > Article > Computer Tutorials > Where does the system put the boot disk?
php editor Xinyi is here to answer your questions about putting the boot disk in the system. A startup disk is usually a device that stores operating system installation files and is used to start and install the system. In most cases, the startup disk should be plugged into your computer's USB port or optical drive. However, the exact insertion location may vary depending on your computer make and model. To determine the correct insertion location, consult your computer's manual or search the Internet for information. Remember to shut down the computer and disconnect it from the power source before inserting the startup disk. Hope this short answer helps you!
1. Insert the boot disk and restart the system.
When the system prompts you to press F1 or F12, just press F12. Different brands of computers may have different keys. You can check the prompts when starting up, or use a search engine to learn about the startup key keys of your computer.
After entering the startup list, you can see the startup sequence, with priority from top to bottom, including hard disk, CD, U disk and network. Use the up and down keys to switch to the disc option, find the row labeled CD DVD, and press Enter to confirm the selection.
4. After pressing Enter, the computer will read the CD data and start from the CD.
5. If you want to permanently boot from the CD, there is actually no need to set it up like this. Didn't there be F1 and F12 before? Press F1 to enter a more comprehensive setting, including startup items. Just save the settings and exit.
After setting the CD as the system's preferred startup disk, you can use the CD to install the operating system. If you are not familiar with the installation process, you can follow the recommended tutorial on the above CD installation system. I hope this information will be helpful to you when installing your system from the CD.
The above is the detailed content of Where does the system put the boot disk?. For more information, please follow other related articles on the PHP Chinese website!