Nowadays, when buying a computer, we all first choose solid-state drives. The biggest advantage of solid-state drives compared to mechanical hard drives is the fast reading and writing speed. Especially when the computer is turned on, it normally takes about 10 seconds for the system to be installed on the solid-state drive to successfully enter the desktop. , and a mechanical hard drive normally takes at least 30-40 seconds to enter the desktop, so if the computer is not equipped with a solid-state drive, it is recommended to install a solid-state drive to obtain the best boot speed, system fluency, and software and game loading speed.
Take the solid-state drive as an example. At first, the computer starts up in about 10 seconds, but after using it for a period of time, the computer starts up slower and slower. I don’t know what the reason is. So how to solve the problem of slow computer startup? Let's share the reasons and solutions for the slow startup speed of Win10 computers.
Cause 1: The software starts automatically at boot
Before solving the problem of automatic startup of the software at boot, we first set the number of processors. First, right-click the "Start" menu and select "Run", as shown in the figure below.

Enter "msconfig" in the running input box to enter the system configuration.

Let’s first click “Advanced Options” in the boot options.

Select the largest number (core) for the number of processors and click OK, as shown in the figure below.

Click Apply again.

Next, disable the self-starting software at boot. Switch to the "Startup" tab and open Task Manager.

In the Task Manager, click the "Startup" tab, find the installed third-party software, such as Thunder, and click "Disable" to stop it from starting automatically at boot. After disabling all automatic startup software one by one, the status will be displayed as "Disabled".
Note: The Task Manager can also be opened using the Ctrt Alt del key combination.

Disable all third-party software in the startup options. These software will not automatically start and open after booting. Let's restart the computer and see if there is a significant change in the boot speed.
2. Turn on Quick Start
First we open the control panel, change the viewing mode to "Large Icons", and click "Power Options", as shown in the figure below.

Click "Choose what the power buttons do" as shown below.

If the shutdown settings cannot be modified, we first click "Change currently unavailable settings", as shown in the figure below.

In the shutdown settings, just check the box in front of "Enable fast startup (recommended)". If "Enable fast startup" is checked by default, don't worry about it.

Right-click the "Start" menu, click Run, enter the "gpedit.msc" command during run, and click OK.

In the "Computer Configuration" on the left, click "Administrative Templates" - "System" - "Shutdown", find "Require to use Fast Startup" in the right window and double-click to enter.

You will be asked to use Quick Start. Select "Enabled" and click OK to close.

Restart the computer and test.
3. Whether multiple anti-virus software are installed
Slow startup may also be caused by the installation of multiple anti-virus software or its components, and the accompanying startup slows down the speed. We have seen a 360 anti-virus software, 360 Security 1 Guard, Kingsoft anti-virus software, Baidu anti-virus software, etc. are installed on each computer. It is enough to keep one of them, and uninstall all the excess. There are also software like Master Lu. After using it, Basically, you will never use it again, so it is recommended to uninstall this type of software.
4. Slow boot speed caused by graphics card driver
You may not believe it, but the graphics card driver can cause the boot speed to be slow. It does happen, from personal experience! I was stupid and updated the graphics card driver, which caused the computer to turn on with a black screen and the boot speed became much slower. I uninstalled the graphics card and reinstalled the graphics card driver.
Uninstalling the driver of the independent graphics card is very simple. Right-click "This PC" and click "Manage", as shown in the figure below.

In the computer management interface, we click "Device Manager", expand "Display Adapters", find the independent graphics card device, we right-click and select "Uninstall Device", (if you have an independent graphics card and Integrated graphics card, if you can't tell which one is the independent graphics card or the integrated graphics card, you can uninstall them both and reinstall them.) As shown in the figure below.

Check "Delete the driver software for this device" and click "Uninstall" to uninstall the independent graphics card driver, as shown in the figure below.

Go to the official website to download the corresponding graphics card driver and reinstall it, or use driver installation software such as Driver Wizard, Driver Life, or Master Lu to reinstall the graphics card driver. If you installed it before For the latest version of the graphics card driver, you can try installing the older version.

It is recommended that you do not update the system and drivers randomly. Sometimes new system patches or drivers may have bugs or compatibility issues. It is best to turn off Windows updates and disable the Windows update service.
5. Defragment the disk and use 360 and the like to clean up junk
We click "This Computer", in this computer, right-click "Local Disk C", which is the system drive letter, and select "Properties" as shown below.

Click "Disk Cleanup"

Check all the files to be deleted and click OK.

Wait for the cleanup to be completed.

It is recommended to frequently use software such as 360 to clear cache and junk files.
6. The mechanical hard disk has bad sectors or the solid state causes slow booting speed
Whether the mechanical hard disk is used as the main disk or the secondary disk, if the mechanical hard disk has bad sectors, the computer startup speed will be slowed down Regarding the slowness issue, if the mechanical hard drive is a secondary drive and not the main drive, you can try unplugging the mechanical hard drive and leaving only the solid-state drive to see if the computer boots up faster. It is not ruled out that there is a problem with the solid state, causing the slow boot speed.
7. Further optimize the boot speed
1. It is recommended that the solid state drive be aligned with 4K.
2. uefi starts the gpt partition table to install the Win10 operating system.
The above is the detailed content of What should I do if Win10 is slow to enter the system?. For more information, please follow other related articles on the PHP Chinese website!

win10中提示80070035找不到网络路径的解决办法:1、单击“网络”,“打开网络和Internet设置”,选择“网络和共享中心”后再选择“更改高级共享设置”,然后勾选“启用共享以便可以访问网络的用户读取公用文件夹中的文件”;2、返回“网络和共享中心”单击“宽带连接”并选择“属性”,点击“网络”,勾选“microsoft网络客户端”即可。

win10找不到网络适配器驱动的解决办法:1、更新驱动程序,可以使用设备管理器来更新驱动程序;2、重新安装驱动程序,先卸载设备,再重启电脑;3、从制造商网站下载驱动程序;4、检查硬件故障。

win10自带的看图软件叫“Microsoft照片”,其下载方法是:1、打开win10电脑;2、在Microsoft Store中搜索“Microsoft照片”并下载;3、将照片查看器的默认软件设置为【照片】即可。

win10任务栏经常假死的原因是win10 64位系统可靠性不佳造成的,其解决方法:1、重启“windows资源管理器”;2、卸载冲突软件;3、重新“部署操作进程”;4、修复系统服务;5、通过powershell命令尝试修复;6、cmd中执行修复命令;7、针对右击任务栏应用图标时弹出菜单缓慢的情况;8、通过新建Windows用户来重置系统设置;9、还原系统。

win10更新后无法上网解决方法:1、检查网络连接,使用其他设备连接同一网络来确认网络是否可用;2、检查网络驱动程序,找到网络适配器,并检查是否有任何驱动程序更新可用;3、重置网络设置,打开“命令”窗口,输入“netsh winsock reset”和“netsh int ip reset”,然后重启;4、更新网络驱动程序;5、检查防火墙和安全软件设置,暂时禁用重新连接即可。

解决方法:1、先重启“Windows资源管理器”;然后以管理员身份运行powershell,执行命令重新部署进程;最后在“个性化”设置界面中,关闭加载最常访问列表功能。2、打开powershell窗口,利用命令检查并修复Windows文件。3、打开“本地组策略编辑器”,进入“内置管理员帐户的管理员批准模式”的属性窗口;然后在“本地安全设置”选项卡中,点击“启用”;最后重启电脑。

win10右键没有管理员权限的解决办法:1、在电脑桌面右键点击“此电脑”;2、在弹出的列表中找到“管理”,点击打开;3、依次选取“系统工具”->“本地用户和组”->“用户”;4、在中间栏找到并点击打开“Administrator”;5、取消勾选“账户已禁用”,然后点击“应用”和“确定”即可。

不够用。虽然4G内存足够满足Windows 10系统的安装需求,但问题是不可能只在电脑里安装一个系统,还要安装其他应用,而这些应用也会占用一定的内存空间;先不考虑CPU、硬盘和显卡等配件是否能够满足需求,只单独说内存,假设用户安装的Windows 10系统占用了2G内存,但其他的辅助插件和应用可能还会占去2G内存,一旦内存被占满,必然会导致电脑出现卡顿、运行慢的情况。


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

SublimeText3 Mac version
God-level code editing software (SublimeText3)

MantisBT
Mantis is an easy-to-deploy web-based defect tracking tool designed to aid in product defect tracking. It requires PHP, MySQL and a web server. Check out our demo and hosting services.

MinGW - Minimalist GNU for Windows
This project is in the process of being migrated to osdn.net/projects/mingw, you can continue to follow us there. MinGW: A native Windows port of the GNU Compiler Collection (GCC), freely distributable import libraries and header files for building native Windows applications; includes extensions to the MSVC runtime to support C99 functionality. All MinGW software can run on 64-bit Windows platforms.

WebStorm Mac version
Useful JavaScript development tools

Safe Exam Browser
Safe Exam Browser is a secure browser environment for taking online exams securely. This software turns any computer into a secure workstation. It controls access to any utility and prevents students from using unauthorized resources.
