Starting the USB disk creation tool is stuck

When making a bootable USB flash drive, sometimes you will encounter a stuck situation, which makes people feel troubled. This problem may occur due to a variety of reasons, such as software incompatibility, USB disk failure, etc. In order to help you solve this problem, PHP editor Zimo will introduce some common solutions to help you successfully complete the creation of the bootable USB disk. Both first timers and experienced users can benefit from it. Let’s find out together!

To solve the problem of computer crash caused by external devices such as USB flash drives, you need to analyze the cause and solve it in detail.

Below, the editor will share with you some common causes of system restarts or computer crashes, and provide methods to solve these problems.

Situation 1

Cause: When you insert the USB disk into the computer, if The operating system prompts "Device not recognized" text that causes the computer to restart or crash.

Solution: In this case, you can follow the computer feedback prompts, indicating that the computer is supplying power to the USB flash drive normally. We can try to get a new USB flash drive. Give it a try and see if the problem still occurs.

Situation 2

Cause: When a USB flash drive or other removable disk device is inserted into the computer, the computer cannot recognize it, causing the computer to crash.

Solution: Re-update the computer's USB driver and reset the BIOS to restore it to factory settings. It should be noted that restoring factory settings may return the hard disk to the pre-installed mode. If you cannot enter the system at this time, you can solve the problem by modifying the hard disk mode.

Situation 3

Cause: Insufficient power supply from the computer to the USB disk may also cause the system to restart. It may be that the system is set to energy-saving mode, causing intermittent system failure.

Solution:

1. First, move the mouse to the desktop computer Right-click on the icon, and then select "Device Manager" in the pop-up menu, as shown below:

##2. Then in the Device Manager window, click to expand "Universal Serial Bus Controller-USB Root Hub", right-click the mouse and select "Properties", as shown in the following figure:

3. Finally, in the pop-up property settings window, switch to the "Power Management" tab, and then select "Allow the computer to turn off this device to Uncheck the "Save Power" option, then click "OK" to save the changes.

As shown below:

##Hope the above The content can be helpful to everyone.

The above is the detailed content of Starting the USB disk creation tool is stuck. For more information, please follow other related articles on the PHP Chinese website!