ASUS motherboard does not display startup items?

php editor Apple has the answer for you: If your ASUS motherboard does not display the startup items when starting up, it may be due to several common problems. First, check that your monitor and cables are working properly. Secondly, confirm whether the boot sequence setting on the motherboard is correct and ensure that the hard disk or solid-state drive where your operating system is located is ranked first in the boot sequence. In addition, sometimes a BIOS update can also solve this problem. You can try updating the motherboard's BIOS version. If none of the above methods work, it is recommended that you contact ASUS's technical support team for further assistance.

Asus motherboard does not display startup items?

You can refer to the following steps:

1. Turn on the computer and press F2 to enter the BIOS, select secure boot menu in the security tab, secure boot control press Enter to select Disable, press F10 to save;

2. After the computer restarts, click F2 to enter the BIOS, select Launch CSM in the boot tab, press Enter to select Enable, and press F10 to save;

3. Restart the computer and click esc to select Startup item, select the corresponding startup method.

How to set up gpt boot on ASUS motherboard?

The steps to set up GPT boot on the ASUS motherboard are as follows:

1. Press the Del key or F2 key on the keyboard when booting to enter the BIOS setting interface.

2. Switch to the "Boot" tab, find the "Boot Option Priorities" option in the tab, and enter the option settings.

3. In the "Boot Option Priorities" menu, enable the UEFI support option (usually "Enabled" or "On" in the menu).

4. Insert the Windows 10 or Windows Server 2016/2019 installation media (whether it is a USB flash drive or DVD) and start the computer from it.

5. During the installation process, when the installation type option pops up, select the "Custom" option (custom) and enter the "Where do you want to install Windows?" (Where do you want to install Windows?) ) page to select the new unallocated disk space.

6. Click the "New" button and create a new partition.

7. Select "GPT" on the "Partition Layout" option, and select NTFS (if you plan to use Windows) or other useless partitions that support GPT on the "File System" .

8. Click the "Apply" button and the system will generate a GPT partition.

9. Follow the Windows prompts during the installation process to complete the installation.

It should be noted that different ASUS motherboard models will have slightly different BIOS setting options and menu items, but they should generally be similar. If you encounter difficulties during the setup process, please refer to the motherboard manual or contact ASUS customer service or technical support for further assistance.

Asus motherboard bios cannot recognize m2 solid state drive?

Reason 1: Some SATA interfaces and NVMe channels will be occupied. The specific port is not sure. The ASUS motherboard PCIE channel occupies the last 2 SATA channels. Please refer to the manual for details;

Reason Two: When installing the system, the BIOS selected the legacy mode, but changed the m.2 solid-state drive to the mbr format. This resulted in the BIOS being unable to recognize the m.2 solid-state drive after installing the system, and the system could not boot. .

How to set dp display on ASUS motherboard?

The first step: Check whether the signal source selection in the monitor is selected as MINIDP. The second step: Check whether the DP signal line can be used normally and confirm by connecting other display devices.

Step 3: If there is no signal from DP, you can first connect to the computer via HDMI cable and turn it on. Use Master Lu or Driver Wizard to check whether the computer graphics card driver has been installed correctly.

Step 4: Check whether the DisplayPort (DP) 1.2 option under the monitor's settings menu is (off). If not, please select the (off) state.

Step 5: Enter BOSS mode when booting through HDMI. After entering, select CSM status under the boot menu to On, then exit and save the selection

Asus motherboard 0x000000a5 solution?

1. After the computer startup screen appears, first press DEL or F2 to enter the BIOS, go to EXIT and change the default [Win8 64bit] in OS optimized Defaults to [Other OS];

2. Then Open "Load Default settings" and click OK;

3. After completing the first two steps, press F10 to save, then restart and continue F2 to enter the BIOS. Change the Boot Priority default [UEFI First] to [Legacy First], indicating the traditional startup method.

4. Change Secure Boot to Disabled, disable secure boot

5. Change CSM to Enable or Yes, indicating compatibility

6. For other versions of BIOS, boot into BIOS → Configuration → Sata controller mode and change it to compatible (modify the hard disk compatibility mode).

Asus b660 motherboard cannot recognize m2 solid state drive?

Causes and solutions:

1. The system version is too low. For computers using M.2 solid-state drives, it is best to install Win8.1 or above version system, because Win7 system and below systems (For example, Win XP) does not come with NVMe driver. The so-called "NVMe", the full name is Non-Volatile Memory Express, which is translated into Chinese as "non-volatile memory standard" and is a logical device interface standard. M.2 is the interface that implements this new standard.

Solution: A relatively simple way is to directly use the quick-boot USB boot disk creation tool to upgrade the system to win10 system, and it will be automatically recognized.

2. CSM is not enabled in Bios. In addition to system reasons, most users now encounter problems with M.2 solid-state drives not being recognized, mainly due to issues with CSM settings. For example, in the new generation of 3 series motherboards and later, some manufacturers turn off CSM by default in order to speed up startup, resulting in the inability to find the M.2 solid-state drive in the BIOS. Solution:

1. Restart the computer , press the Del key to enter the BIOS settings, select the ADVANCED (Advanced) option;

2. Enter the BOOT (boot) setting interface;

3. Find the "CSM (Compatible Support Module)" setting option ;M.2 SSD

Asus h510m-k hard drive cannot start?

1. It may be set to UEFI boot, but the partition table of the hard disk is still MBR (MBR does not support UEFI boot), so there is no hard disk in the boot device.

2. You can reformat the hard disk into a GPT partition first, then install the system, use another computer or use a USB disk PE system to boot and then format the hard disk.

3. You can also change the boot mode to CSM (compatibility mode), save and restart, and you should be able to find the hard disk in the boot device. At this time, the h510 motherboard can boot from the hard disk

How to set bios on ASUS m2n motherboard?

You can try to click the F9 key--Enter key--F10 key--Enter key in the BIOS interface. If you still cannot enter the system, please follow the following operations to change the BIOS settings:

1. When turning on the computer, long press the F2 key to enter the BIOS interface, use the direction keys to enter the menu, use the direction keys to select an option, and set it to Disabled"

2. Use the direction keys to enter the menu, and use the direction keys to select option and set it to "Enabled"

3. Click F10 to save the settings and try restarting the computer.

The above is the detailed content of ASUS motherboard does not display startup items?. For more information, please follow other related articles on the PHP Chinese website!