Home > Article > Software Tutorial > How to apply silicone grease for best heat dissipation "Detailed explanation: The correct way to apply silicone grease on CPU radiator"
php editor Baicao explains to you in detail how to apply silicone grease correctly to achieve the best heat dissipation effect. Silicone grease is an important thermal conductive material in CPU heat sinks. Correct application can improve the heat dissipation effect and protect the health of the CPU. First, clean the CPU and radiator surfaces to make sure they are free of dust and dirt. Then, take an appropriate amount of silicone grease and place it in the center of the heart-shaped pattern on the CPU. Finally, place the heatsink on the CPU and gently rotate it a few times to ensure the silicone grease is evenly distributed. Remember, applying too much or too little will affect the cooling effect, so use the right amount. Hopefully this guide will help you apply silicone grease correctly for optimal cooling.
Compared with audio, there are much fewer metaphysics in PC computers. If you have to find a PC metaphysics, then the method of applying silicone grease to the CPU heat sink can be one. This issue has been entangled for many years. Different I'm afraid even the veterans can't find a unified approach. The silicone grease applied to the radiator is used for heat conduction, so what should be done to ensure the best heat dissipation effect?
The Japanese mynavi website recently conducted heat dissipation tests on a variety of silicone greases, and also tested the impact of different silicone grease application methods on the heat dissipation effect. In the test, they used a Core i7-9700K processor, the silicone grease used was AC MX-4, and the radiator was Toru Toru Mark II from Japan's Scythe Company, using a single-fan air-cooling design.
There are two application solutions they tested, but there are three specific results. One is to squeeze a larger amount of silicone grease on the top cover of the CPU, and the second is to squeeze a smaller amount of silicone grease. Another way is to use the provided spatula to apply silicone grease evenly. The details are as follows.
##So what is the actual temperature result? First of all, the standby temperatures of the three types of applicators are basically 30 to 31°C, and there is no difference. Among the load temperatures of the OCCT Linpack machine after ten minutes, the temperature for drip coating was 89°C, while the temperature for even coating was 87°C. In general, the temperature difference between the two application methods is not big. If you want to pursue the best effect, it is definitely best to apply it evenly, because the function of silicone grease is to fill the gap between the radiator base and the CPU surface. The gaps between them replace air, a medium with poor thermal conductivity. The more uniform and natural the better.The above is the detailed content of How to apply silicone grease for best heat dissipation "Detailed explanation: The correct way to apply silicone grease on CPU radiator". For more information, please follow other related articles on the PHP Chinese website!