Learn how to replace laptop memory modules

How to replace the memory module of the computer

1. Pull out the computer main case and observe that there will be simple screws on the back of the case. There are 2 in total on the top and bottom. We will tighten them. Come down. After unscrewing the screws, hold down the chassis cover and push it to the left, and the main chassis cover will be removed.

2. Use a screwdriver to open the back cover of the computer and ensure that the computer memory slot model is consistent with the memory module model.

3. Separate the buckles on both sides outward; 2. Pull out the memory module upwards. When disassembling and assembling, be careful not to damage the electronic components and solder joints on the memory module.

How to add a memory module to a laptop

1. The steps to install a memory module on a laptop are as follows: First prepare a small screwdriver and select it according to the type of screws in your laptop. With the computer turned off, remove the laptop battery. cover (the battery is usually an independent back cover), remove the laptop battery, and ensure that the laptop is isolated from the power supply to prevent the computer from burning out the memory slot when the memory module is installed.

2. First, shut down the computer, remove the power supply of the computer, and remove the battery, as shown in the picture below. Remove all the screws from the laptop and open the cover along the gap, as shown in the picture below. Then you can see the erasing area of ​​the notebook, as shown in the picture below.

3. If you need to replace the memory module, you must first remove the existing memory module. Remember to ground the computer before operating to prevent static electricity from causing computer malfunction. If you don’t know the details of this step, you can refer to relevant tutorials or seek help from professionals.

4. Use a screwdriver to open the back cover of the computer and ensure that the computer memory slot model is consistent with the memory module model.

5. The method of adding a memory module to a laptop is as follows: First open the computer casing and disassemble the computer. When installing memory, first open the buckles at both ends of the memory slot with your hands.

How to install a memory module in a notebook

Step method How to replace the memory in a notebook Step 1 Remove the protective cover There are protective covers on the notebook memory slots. The first step is to remove the protective cover. Lose.

Taking a Lenovo notebook as an example, the method for installing a memory module in a notebook is as follows: Prepare the memory module, computer and corresponding disassembly tools. Turn off the notebook and remove the battery. Use a needle or other sharp object to take out the round object in the red box, and the screw below will appear.

The method of adding a memory module to a laptop is as follows: First open the computer casing and disassemble the computer. When installing memory, first open the buckles at both ends of the memory slot with your hands.

First remove the laptop battery and ensure that the laptop is isolated from the power supply to prevent the computer from burning out the memory slot when the memory module is installed and turned on. After removing the battery and opening the back cover of the notebook, we can see computer parts such as fans and memory modules. Then pull out the buckle next to the memory stick so that the first memory stick "stands up".

The above is the detailed content of Learn how to replace laptop memory modules. For more information, please follow other related articles on the PHP Chinese website!