The computer cannot be started and 360 Reinstallation Master failed.

The computer cannot be started using 360 Reinstallation Master

The solution to a failed system installation is to replace the verified system disk to achieve a fully automatic and smooth system reinstallation. You can choose to use a USB flash drive or hard drive for installation, as they install very quickly. However, the key is to choose a system disk with good compatibility, which is compatible with IDE, ACHI, and RAID mode installations, and can automatically and permanently activate and install the machine hardware driver sequence. In this way, a fully automatic and smooth system reinstallation can be achieved. The specific method is as follows:

Use UltraISO software to open the downloaded system installation disk file (ISO file). Select "Write Image File", insert the USB flash drive into the computer, and click "OK". After waiting for the process to complete, you will have a USB flash drive that can be used to boot and install the system. After using this USB flash drive to boot the computer, you can successfully reinstall the system.

2. Hard disk installation: The premise is that there needs to be a Windows system that can run normally. Extract "*.GHO" and "Installation System.EXE" in the downloaded ISO file to the non-system partition of the computer, and then run " Install System.EXE", press Enter directly to confirm the restore operation, and confirm again to execute the automatic installation operation. (Be sure to back up important data on drive C before executing!);

3. Graphic tutorial: How can I give you a detailed graphic version installation tutorial in this regard? Cannot be attached. It will be judged as a violation by the system.

The download address of the system disk for reinstalling the system is in the upper right corner of the "Know Page"... si xin zhong... Yes! Hope to adopt!

What is the reason why the system cannot be started when using 360 from the installation system? Is there any solution?

Install directly with U disk.

Suggestion: Before reinstalling the system, format the C drive and then reinstall the system to solve the problem of bad sectors on the hard disk.

The following is the installation process using a USB flash drive. Take a look at it yourself and learn from others, and it is more convenient for you.

U disk installation system is to install the PE system on the U disk. After being inserted into the computer, it can be started through the motherboard, which facilitates the installation and use of the operating system.

Specific method: Buy a 2.0U disk (3.0U disk requires a driver, the installation may fail.), follow the steps below to install the system yourself.

The following is the U disk installation process: Take Chinese cabbage PE or Laomaotao PE as an example, they are all the same.

The following is the U disk installation process: Take Chinese cabbage as an example

Prepare an empty U disk with no files stored (it is recommended to use a U disk of 8G or above. Note: the U disk will be formatted when making the PE system). Download the Dabaicai U disk installation system software. If your computer is available, just Install the U disk into the PE system on your own computer. If it is not easy to use it on other machines to make the U disk of the 'Chinese Cabbage' PE installation software, you can start the installation, insert the U disk into the computer and start it.

The first thing to do after the U disk is ready is: When the computer is normal or when it goes to the PE desktop, back up important files on the computer (mainly: important files on the desktop and important files in My Documents, copy to the D drive.) Then start executing the following things:

1, first download the WINXP, WIN 7 or WIN10 image to the hard disk or make a GHO file in advance and save it in the U disk, and then create a new GHO file in the root directory of the disk other than the C disk or the U disk. folder, you can also create a GHO folder in the root directory of drive D, and then use UltarISO or WinRAR to decompress the WIN7 image and release it into the GHO folder.

Note: Remember not to create a GHO folder in the C drive, otherwise the GHO file will be cleared during the installation process and the installation will fail.

2. Insert the bootable USB disk into the computer and then turn it on:

If it is a new UEFI BIOS, you can generally press F12 directly to enter the quick boot menu, select the U disk name in the menu, and then boot from the U disk.

If it is an old BIOS, you must press Del or F2 to enter the BIOS, and then find the First Boot Device or 1st Boot Device under the Advanced BIOS Features project, or Boot, or Startup, etc. After entering, put the USB-HDD or Set the U disk name as the first boot,

For specific methods, please refer to the motherboard manual, or search online.

After starting the U disk, enter the U disk PE interface and select "Run Windows PE (system installation)".

3. After entering the Dabaicai PE or Laomaotao PE desktop, select the desktop shortcut icon "WIN System Installer" and double-click to run it.

4. The NT6 quick installer pops up. The first thing you need to do is find the system files you downloaded and decompressed previously, so press the "Open" button.

5, open a file selection box, find the GHO folder previously created on the D drive, then find its subfolder Sources, and then find the install.wim file under the Sources folder. This is the installation file. Select When finished, press the "Open" button.

6, then select the installation partition, which usually defaults to C drive. If you need to install to another drive, you need to adjust it manually. If you are a novice, it is best not to adjust it, because the system partition must be the primary partition, and It has to be activated, so if you don't know this, it's best not to touch this.

7. Here, the last confirmation window before installation pops up. Take a closer look. If you are sure that you have selected everything, you can click "OK" and the installation will begin.

8. At this time, the system files in GHO will be copied to the C drive. It will take some time to copy several G files. Please wait patiently.

9. After the copying is completed, the prompt "Please restart the computer to enter the installation phase" pops up. Click "Yes" and the computer will restart immediately. At this time, you can pull out the U disk. If it is UEFI BIOS, it will still be downloaded from the hard disk. To start, if it is an old BIOS, you must enter the BIOS and change booting from the USB disk to booting from the hard disk.

10. After restarting from the hard disk and entering the computer, the system installation will begin, such as configuring the start menu, registering components, etc. The entire installation process will take longer, so be sure to wait patiently.

Notice! Force exit is prohibited before installation is complete. Please adopt it if it helps

The above is the detailed content of The computer cannot be started and 360 Reinstallation Master failed.. For more information, please follow other related articles on the PHP Chinese website!