How to adjust the hard drive boot sequence on ASUS laptop?

How to set up the hard drive for Asus laptop?

The specific steps for setting up the hard disk boot for ASUS notebooks are as follows:

1. Press the F2 key when booting to enter the BIOS setup interface.

2. In the BIOS setup interface, use the arrow keys to move to the "Boot" tab, then select "Boot Option Priorities" and press the Enter key.

3. On the Boot Option Priorities page, find Boot Option #1 and press Enter.

4. In the "Boot Option #1" menu that appears, select the hard drive you want to set as the boot disk and press Enter.

5. If there are multiple hard drives in your laptop, you can set the boot order of the hard drive by selecting "Hard Drive BBS Priorities" and pressing the Enter key.

6. Press F10 to save the settings and exit the BIOS setup interface.

After completing the above settings, your ASUS laptop will boot from the hard drive you set. It should be noted that the BIOS setting interfaces of different models of ASUS laptops may have some differences, but the general operation process is similar. If you are not sure how to set it up, you can refer to your laptop's manual or contact ASUS after-sales service.

What are the steps to set up hard drive startup in ASUS bios?

1. After booting, press DEL to enter the BIOS:

2. Use the arrow keys or the mouse to select the menu:

3. Use the arrow keys or move the mouse down to see :

4. You cannot see the second hard drive installed in:

5. At this time, you need to click below:

6. You can see it after opening it. The second hard drive installed:

7. Select, press Enter, select the second hard drive installed, and press Enter:

8. The second hard drive installed becomes It has become the first startup item:

9, F10, save and exit, and the setting is completed. Note: The setting interface will be different for different motherboard models and BIOS versions.

How to set up the hard drive for ASUS motherboard?

1. After booting, press F2 continuously to enter the bios settings of the ASUS motherboard. The current bios generally has a Chinese interface. Select startup according to the prompts, and then select the hard disk that needs to be started.

Two, or directly press the f12 shortcut startup key after booting, and select hard disk startup in the pop-up menu.

How to add a hard drive to ASUS boot options?

Asus boot options to add a hard drive as follows

1. Turn off the computer and disconnect all cables, make sure the safety power cord is unplugged from the power outlet.

2. Open the chassis. It is usually necessary to remove the chassis side panel. The steps may vary depending on the model and production batch. It is recommended to consult the user manual of the ASUS v5200.

3. Find the free hard drive bay and unscrew the bay screws.

4. Install the new hard drive onto the bracket and tighten the screws.

5. Insert the hard disk tray into the hard disk bay of the chassis, and make sure it is well connected to the motherboard, power supply and other hardware.

6. Close the side panel of the chassis and reconnect all the cables.

7. Start the computer and check whether the new hard drive is recognized by the system.

It should be noted that electrostatic interference should be avoided during operation. You can avoid electrostatic interference by grounding means such as a grounding wrist strap, thereby protecting sensitive hardware such as hard drives from damage.

Asus bios settings hard drive startup steps?

1. When turning on the computer, long press the F2 key to enter the BIOS interface, use the direction keys to enter the menu, use the direction keys to select the option, and set it to "Disabled";

2. Use the direction keys to enter the BIOS interface. key to enter the menu, use the direction keys to select the option, and set it to "Enabled";

3. Click F10 to save the settings, restart the system, and click ESC to select the startup item when booting.

How to set the ASUS motherboard to boot from the hard disk?

1. After booting, press F2 continuously to enter the bios settings of the ASUS motherboard. The current bios generally has a Chinese interface. Select startup according to the prompts, and then select the hard disk that needs to be started.

Two, or directly press the f12 shortcut startup key after booting, and select hard disk startup in the pop-up menu.

How to set up the hard drive for ASUS motherboard?

1. After booting, press F2 continuously to enter the bios settings of the ASUS motherboard. The current bios generally has a Chinese interface. Select startup according to the prompts, and then select the hard disk that needs to be started.

Two, or directly press the f12 shortcut startup key after booting, and select hard disk startup in the pop-up menu.

The above is the detailed content of How to adjust the hard drive boot sequence on ASUS laptop?. For more information, please follow other related articles on the PHP Chinese website!