search
HomeOperation and MaintenanceLinux Operation and MaintenanceExploring the Linux cache mechanism: an in-depth analysis revealing its operating principles and classification

Exploring the Linux cache mechanism: an in-depth analysis revealing its operating principles and classification

In-depth analysis of the Linux cache mechanism: exploring its working principle and classification

Introduction:
Linux is a widely used operating system, and its performance optimization has always been One of the main focuses of developers. As one of the key technologies to improve system performance, the caching mechanism plays an important role in Linux systems. This article will provide an in-depth analysis of the Linux caching mechanism, explore its working principles and classification, and provide specific code examples.

1. The working principle of the Linux cache mechanism
The Linux cache mechanism plays an important role in memory management. Its main working principles are as follows:

  1. Reading of cached data :
    When an application needs to read a file, the operating system will first check whether the cache data for the file already exists in the cache. If it exists, the data is read directly from the cache, avoiding the overhead of accessing the disk. If there is no data for the file in the cache, the operating system reads the file from disk into the cache and returns it to the application for use.
  2. Writing of cached data:
    When an application needs to write to a file, the operating system will first write the data into the cache and mark it as "dirty" data. The operating system writes "dirty" data back to disk only when the system is low on memory or when the cached data is needed by another process.
  3. Replacement of cached data:
    When the system memory is insufficient, the operating system will select some cached data for replacement according to a certain algorithm to make room for new data. Replacement algorithms are typically evaluated and selected based on the frequency and importance of cached data being accessed.

2. Classification of Linux caching mechanism
Linux caching mechanism can be divided into the following categories according to the type and purpose of cached data:

  1. File Cache (Page Cache ):
    File cache is the most common type of cache in Linux, which caches file data in page units. When an application needs to read a file, the operating system first checks to see if a page for the file already exists in the file cache. If it exists, the data is read directly from the cache; if it does not exist, the file data needs to be read from the disk into the cache. Page caching will reduce read and write operations to the disk, thereby increasing the speed of file access.
  2. Directory cache (dentry Cache):
    Directory cache is mainly used to cache information related to directories in the file system, such as the inode number of the directory, the file name corresponding to the directory entry, etc. It can reduce the overhead when applications perform directory operations in the file system and speed up file system access.
  3. Buffer Cache:
    The block cache is mainly used to cache block data in the file system, such as the super block, index node and data block of the file system. It can provide random access to the disk, thereby improving file system performance.
  4. Network cache (Socket Buffer Cache):
    The network cache is used to cache network data, such as data packets, socket buffers, etc. in the TCP/IP protocol stack. It can effectively reduce the data transmission overhead between applications and network devices and improve the efficiency of network transmission.

3. Code examples of Linux caching mechanism
The following are some specific code examples used by the Linux caching mechanism:

  1. File cache reading:

    #include <stdio.h>
    #include <fcntl.h>
    #include <unistd.h>
    
    int main() {
     int fd = open("test.txt", O_RDONLY);
     char buf[1024];
     ssize_t n = read(fd, buf, sizeof(buf));
     close(fd);
     return 0;
    }
  2. File cache writes:

    #include <stdio.h>
    #include <fcntl.h>
    #include <unistd.h>
    
    int main() {
     int fd = open("test.txt", O_WRONLY | O_CREAT, 0644);
     char buf[1024] = "Hello, world!";
     ssize_t n = write(fd, buf, sizeof(buf));
     close(fd);
     return 0;
    }
  3. Directory cache reads:

    #include <stdio.h>
    #include <dirent.h>
    
    int main() {
     DIR* dir = opendir("/path/to/dir");
     struct dirent* entry;
    
     while ((entry = readdir(dir)) != NULL) {
         printf("%s
    ", entry->d_name);
     }
    
     closedir(dir);
     return 0;
    }

Conclusion :
Through an in-depth analysis of the Linux cache mechanism, we understand its working principle and classification. By properly utilizing and managing the cache mechanism, we can effectively improve system performance and response speed. I hope this article will help readers understand the Linux caching mechanism and application performance optimization.

Reference materials:
[1] Understanding the Linux Kernel, Third Edition, O'Reilly
[2] Linux kernel source code
[3] https://www.kernel. org/

The above is the detailed content of Exploring the Linux cache mechanism: an in-depth analysis revealing its operating principles and classification. For more information, please follow other related articles on the PHP Chinese website!

Statement
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
Maintenance Mode in Linux: A System Administrator's GuideMaintenance Mode in Linux: A System Administrator's GuideApr 26, 2025 am 12:20 AM

Maintenance mode plays a key role in Linux system management, helping to repair, upgrade and configuration changes. 1. Enter maintenance mode. You can select it through the GRUB menu or use the command "sudosystemctlisolaterscue.target". 2. In maintenance mode, you can perform file system repair and system update operations. 3. Advanced usage includes tasks such as resetting the root password. 4. Common errors such as not being able to enter maintenance mode or mount the file system, can be fixed by checking the GRUB configuration and using the fsck command.

Maintenance Mode in Linux: When and Why to Use ItMaintenance Mode in Linux: When and Why to Use ItApr 25, 2025 am 12:15 AM

The timing and reasons for using Linux maintenance mode: 1) When the system starts up, 2) When performing major system updates or upgrades, 3) When performing file system maintenance. Maintenance mode provides a safe and controlled environment, ensuring operational safety and efficiency, reducing impact on users, and enhancing system security.

Linux: Essential Commands and OperationsLinux: Essential Commands and OperationsApr 24, 2025 am 12:20 AM

Indispensable commands in Linux include: 1.ls: list directory contents; 2.cd: change working directory; 3.mkdir: create a new directory; 4.rm: delete file or directory; 5.cp: copy file or directory; 6.mv: move or rename file or directory. These commands help users manage files and systems efficiently by interacting with the kernel.

Linux Operations: Managing Files, Directories, and PermissionsLinux Operations: Managing Files, Directories, and PermissionsApr 23, 2025 am 12:19 AM

In Linux, file and directory management uses ls, cd, mkdir, rm, cp, mv commands, and permission management uses chmod, chown, and chgrp commands. 1. File and directory management commands such as ls-l list detailed information, mkdir-p recursively create directories. 2. Permission management commands such as chmod755file set file permissions, chownuserfile changes file owner, and chgrpgroupfile changes file group. These commands are based on file system structure and user and group systems, and operate and control through system calls and metadata.

What is Maintenance Mode in Linux? ExplainedWhat is Maintenance Mode in Linux? ExplainedApr 22, 2025 am 12:06 AM

MaintenanceModeinLinuxisaspecialbootenvironmentforcriticalsystemmaintenancetasks.Itallowsadministratorstoperformtaskslikeresettingpasswords,repairingfilesystems,andrecoveringfrombootfailuresinaminimalenvironment.ToenterMaintenanceMode,interrupttheboo

Linux: A Deep Dive into Its Fundamental PartsLinux: A Deep Dive into Its Fundamental PartsApr 21, 2025 am 12:03 AM

The core components of Linux include kernel, file system, shell, user and kernel space, device drivers, and performance optimization and best practices. 1) The kernel is the core of the system, managing hardware, memory and processes. 2) The file system organizes data and supports multiple types such as ext4, Btrfs and XFS. 3) Shell is the command center for users to interact with the system and supports scripting. 4) Separate user space from kernel space to ensure system stability. 5) The device driver connects the hardware to the operating system. 6) Performance optimization includes tuning system configuration and following best practices.

Linux Architecture: Unveiling the 5 Basic ComponentsLinux Architecture: Unveiling the 5 Basic ComponentsApr 20, 2025 am 12:04 AM

The five basic components of the Linux system are: 1. Kernel, 2. System library, 3. System utilities, 4. Graphical user interface, 5. Applications. The kernel manages hardware resources, the system library provides precompiled functions, system utilities are used for system management, the GUI provides visual interaction, and applications use these components to implement functions.

Linux Operations: Utilizing the Maintenance ModeLinux Operations: Utilizing the Maintenance ModeApr 19, 2025 am 12:08 AM

Linux maintenance mode can be entered through the GRUB menu. The specific steps are: 1) Select the kernel in the GRUB menu and press 'e' to edit, 2) Add 'single' or '1' at the end of the 'linux' line, 3) Press Ctrl X to start. Maintenance mode provides a secure environment for tasks such as system repair, password reset and system upgrade.

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

Video Face Swap

Video Face Swap

Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Tools

SAP NetWeaver Server Adapter for Eclipse

SAP NetWeaver Server Adapter for Eclipse

Integrate Eclipse with SAP NetWeaver application server.

Atom editor mac version download

Atom editor mac version download

The most popular open source editor

EditPlus Chinese cracked version

EditPlus Chinese cracked version

Small size, syntax highlighting, does not support code prompt function

SublimeText3 English version

SublimeText3 English version

Recommended: Win version, supports code prompts!

MantisBT

MantisBT

Mantis is an easy-to-deploy web-based defect tracking tool designed to aid in product defect tracking. It requires PHP, MySQL and a web server. Check out our demo and hosting services.