请使用RHEL/CentOS 6.4及更新版本内核的MySQL同志们注意,vm.swappiness = 0的默认行为修改了,如果继续设置vm.swappiness = 0,有可能导致系统内存溢出,从而导致MySQL被意外kill掉。
在之前的《LINUX上MYSQL优化三板斧》中,我们建议大家把 vm.swappiness = 0 设置好。来尽量避免MySQL的服务器内存被交换出去。这样Linux在把内存交换出去时更偏向于将cache页交换出去,而不是将inactive页交换出去。详细描述请参考:http://www.woqutech.com/?p=1200。
经常有人会问, vm.swappiness = 0会不会导致Linux在有swap空间的时候也不交换出去,从而导致内存溢出(OOM)。参照《LINUX上MYSQL优化三板斧》介绍,我们知道,这个值只是一个Linux在判断是否交换内存(swap)的一个“倾向”参考值,而并不是说,设置为0以后,Linux就完全不会使用内存交换空间。
但是,在较新的内核中(2.6.32-303.el6及以后),vm.swappiness = 0 的默认行为修改掉了,这个说法不再成立。设置该参数vm.swappiess=0,有可能导致MySQL数据库所在的系统出现内存溢出。一般来说,MySQL数据库占用的内存是整个服务器中最大的,根据Linux的策略,它会会首先把MySQL给Kill掉(调整 /proc/(pidof -s mysqld)/oom_adj可以改变OOM时kill的优先级),从而导致应用故障等。
这个修改是在内核3.5-rc1中提交的,并且合并到了2.6.32-303.el6及之后的各个版本。先让我们来看看这个patch:
http://gitorious.ti.com/ti-linux-kernel/ti-linux-kernel/commit/fe35004fbf9eaf67482b074a2e032abb9c89b1dd?format=patch
From fe35004fbf9eaf67482b074a2e032abb9c89b1dd Mon Sep 17 00:00:00 2001
From: Satoru Moriya
Date: Tue, 29 May 2012 15:06:47 -0700
Subject: [PATCH] mm: avoid swapping out with swappiness==0
Sometimes we'd like to avoid swapping out anonymous memory. In
particular, avoid swapping out pages of important process or process
groups while there is a reasonable amount of pagecache on RAM so that we
can satisfy our customers' requirements.
OTOH, we can control how aggressive the kernel will swap memory pages with
/proc/sys/vm/swappiness for global and
/sys/fs/cgroup/memory/memory.swappiness for each memcg.
But with current reclaim implementation, the kernel may swap out even if
we set swappiness=0 and there is pagecache in RAM.
This patch changes the behavior with swappiness==0. If we set
swappiness==0, the kernel does not swap out completely (for global reclaim
until the amount of free pages and filebacked pages in a zone has been
reduced to something very very small (nr_free + nr_filebacked
watermark)).
Signed-off-by: Satoru Moriya
Acked-by: Minchan Kim
Reviewed-by: Rik van Riel
Acked-by: Jerome Marchand
Signed-off-by: Andrew Morton
Signed-off-by: Linus Torvalds
---
mm/vmscan.c | 6 +++---
1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/mm/vmscan.c b/mm/vmscan.c
index 67a4fd4..ee97530 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1761,10 +1761,10 @@ static void get_scan_count(struct mem_cgroup_zone *mz, struct scan_control *sc,
* proportional to the fraction of recently scanned pages on
* each list that were recently referenced and in active use.
*/
- ap = (anon_prio + 1) * (reclaim_stat->recent_scanned[0] + 1);
+ ap = anon_prio * (reclaim_stat->recent_scanned[0] + 1);
ap /= reclaim_stat->recent_rotated[0] + 1;
- fp = (file_prio + 1) * (reclaim_stat->recent_scanned[1] + 1);
+ fp = file_prio * (reclaim_stat->recent_scanned[1] + 1);
fp /= reclaim_stat->recent_rotated[1] + 1;
spin_unlock_irq(&mz->zone->lru_lock);
@@ -1777,7 +1777,7 @@ out:
unsigned long scan;
scan = zone_nr_lru_pages(mz, lru);
- if (priority || noswap) {
+ if (priority || noswap || !vmscan_swappiness(mz, sc)) {
scan >>= priority;
if (!scan && force_scan)
scan = SWAP_CLUSTER_MAX;
--
1.7.5
就像Satoru Moriya所说的那样,在之前的版本中,就算我们设置了swappiness=0并且RAM中还有pagecache,内核也可能会交换出部分匿名内存页。而为了“满足用户的需求”,这个patch修改了swappiness=0的行为,如果你设置swappiness=0,那么只有在(nr_free + nr_filebacked
在2.6.32-303.el6 RHEL/CentOS及更新版本的内核中,该patch就已经被合并进来:
* Mon Aug 27 2012 Jarod Wilson
...
- [mm] avoid swapping out with swappiness==0 (Satoru Moriya) [787885]
其他分发版本的Linux(比如Debian,Ubuntu)的版本中,请各位自己查阅一下,看看时候已经合并该patch。
RHEL/CentOS 6.3的内核版本是2.6.32-279,而RHEL/CentOS 6.4的内核为2.6.32-358,从这个版本开始,swappiness的行为就已经修改了,使用这个版本及之后版本的同志们需要特别注意一下。
解决的办法其实也很简单,
1、尽量保证Linux操作系统还有足够的内存
2、最新的内核,建议把vm.swappiness设置1
3、考虑设置 /proc/(pidof -s mysqld)/oom_adj为较小的值来尽量避免MySQL由于内存不足而被关闭。
参考:
https://github.com/torvalds/linux/blob/master/mm/vmscan.c
http://gitorious.ti.com/ti-linux-kernel/ti-linux-kernel/commit/fe35004fbf9eaf67482b074a2e032abb9c89b1dd?format=patch
http://www.mysqlperformanceblog.com/2014/04/28/oom-relation-vm-swappiness0-new-kernel/

MySQLstringtypesimpactstorageandperformanceasfollows:1)CHARisfixed-length,alwaysusingthesamestoragespace,whichcanbefasterbutlessspace-efficient.2)VARCHARisvariable-length,morespace-efficientbutpotentiallyslower.3)TEXTisforlargetext,storedoutsiderows,

MySQLstringtypesincludeVARCHAR,TEXT,CHAR,ENUM,andSET.1)VARCHARisversatileforvariable-lengthstringsuptoaspecifiedlimit.2)TEXTisidealforlargetextstoragewithoutadefinedlength.3)CHARisfixed-length,suitableforconsistentdatalikecodes.4)ENUMenforcesdatainte

MySQLoffersvariousstringdatatypes:1)CHARforfixed-lengthstrings,2)VARCHARforvariable-lengthtext,3)BINARYandVARBINARYforbinarydata,4)BLOBandTEXTforlargedata,and5)ENUMandSETforcontrolledinput.Eachtypehasspecificusesandperformancecharacteristics,sochoose

TograntpermissionstonewMySQLusers,followthesesteps:1)AccessMySQLasauserwithsufficientprivileges,2)CreateanewuserwiththeCREATEUSERcommand,3)UsetheGRANTcommandtospecifypermissionslikeSELECT,INSERT,UPDATE,orALLPRIVILEGESonspecificdatabasesortables,and4)

ToaddusersinMySQLeffectivelyandsecurely,followthesesteps:1)UsetheCREATEUSERstatementtoaddanewuser,specifyingthehostandastrongpassword.2)GrantnecessaryprivilegesusingtheGRANTstatement,adheringtotheprincipleofleastprivilege.3)Implementsecuritymeasuresl

ToaddanewuserwithcomplexpermissionsinMySQL,followthesesteps:1)CreatetheuserwithCREATEUSER'newuser'@'localhost'IDENTIFIEDBY'password';.2)Grantreadaccesstoalltablesin'mydatabase'withGRANTSELECTONmydatabase.TO'newuser'@'localhost';.3)Grantwriteaccessto'

The string data types in MySQL include CHAR, VARCHAR, BINARY, VARBINARY, BLOB, and TEXT. The collations determine the comparison and sorting of strings. 1.CHAR is suitable for fixed-length strings, VARCHAR is suitable for variable-length strings. 2.BINARY and VARBINARY are used for binary data, and BLOB and TEXT are used for large object data. 3. Sorting rules such as utf8mb4_unicode_ci ignores upper and lower case and is suitable for user names; utf8mb4_bin is case sensitive and is suitable for fields that require precise comparison.

The best MySQLVARCHAR column length selection should be based on data analysis, consider future growth, evaluate performance impacts, and character set requirements. 1) Analyze the data to determine typical lengths; 2) Reserve future expansion space; 3) Pay attention to the impact of large lengths on performance; 4) Consider the impact of character sets on storage. Through these steps, the efficiency and scalability of the database can be optimized.


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

Video Face Swap
Swap faces in any video effortlessly with our completely free AI face swap tool!

Hot Article

Hot Tools

Safe Exam Browser
Safe Exam Browser is a secure browser environment for taking online exams securely. This software turns any computer into a secure workstation. It controls access to any utility and prevents students from using unauthorized resources.

VSCode Windows 64-bit Download
A free and powerful IDE editor launched by Microsoft

SecLists
SecLists is the ultimate security tester's companion. It is a collection of various types of lists that are frequently used during security assessments, all in one place. SecLists helps make security testing more efficient and productive by conveniently providing all the lists a security tester might need. List types include usernames, passwords, URLs, fuzzing payloads, sensitive data patterns, web shells, and more. The tester can simply pull this repository onto a new test machine and he will have access to every type of list he needs.

WebStorm Mac version
Useful JavaScript development tools

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.
