Change the wireless password to 192161

I want to change the wireless password and after entering 192 16 1 1, I encountered the user here for authentication

1. If the default administrator password is given on the nameplate, then you can enter the default password and log in.

If there is no administrator password information on the nameplate on the bottom of your router, it means that the router does not have a default administrator password when shipped from the factory.

The router in the factory state does not have a default administrator password. Instead, when setting up the Internet for the first time, the system will prompt the user to set a password as the administrator password. If you don’t remember the administrator password you set previously, and the router does not have a default administrator password, you need to use other methods to reset the password.

In this case, there is only one solution: reset the router and set it up again. First, make sure the router is powered on. Then, press and hold the reset button on the router for about 10 seconds and then release it. Wait for the router to reboot to complete.

Extended information

The WPA shared key can be an easy-to-remember phrase, word, or number combination. When configuring a wireless network, there are many types of wireless security solutions. Among them, the most commonly used ones in homes and offices are WEP (Limited Equivalent Privacy) and WPA (Wi-Fi Protected Access).

Each type has multiple options and different tiers, including wireless networking for added security. In addition, there is a more complex wireless network standard, the enterprise-level security standard, but it is rarely used by ordinary computer users.

Reference source: 192 Wireless Network-Change the wireless network password. What is the administrator password?

What’s wrong with authentication when setting router password on mobile phone

＂ If your phone cannot connect to the wireless network, please try the following common situations:

1. If you could connect before, but you can’t connect now:

1) Turn off the wireless network and try to search again;

2) Check whether the entered wireless network password is correct.

2. If you cannot connect for the first time or cannot connect to a public wireless network:

Confirm whether the connection of other devices under the same wireless network is normal and whether the wireless network has set connection restrictions.

3. If you cannot connect to the wireless network with a Chinese name:

Due to device compatibility issues, some wireless networks with Chinese names or special symbols may not be able to connect. It is recommended to change the wireless network name to English.

4. If there is no search, error, timeout, etc.:

Please check whether the router connection is normal (the modem cannot be connected), shut down the phone and the router, restart them and try to connect again.

5. If the above operations are ineffective, it is recommended to back up important data (contacts, text messages, photos, etc.) and try restoring factory settings.

If the problem persists, please bring your purchase invoice, repair card and machine to the service center for inspection. "

Why do you need authentication to change the wifi password

There are four reasons:

The first, more common password error, just re-enter the correct password. The specific steps are to press and hold the network you want to connect to on the WiFi interface, and in the pop-up options, click Modify, or do not save the network, and enter the correct password when reconnecting.

The second type is channel problem. Because there are too many routers nearby, the transmit power is different and interfere with each other, causing problems. At this time, you can change the channel. Specifically, enter the IP address on the router in the browser address bar. The general default is 192.168.1.1. Press Enter to enter, find Wireless Settings - Basic Settings - Channel, and then change it.

The third type is input method problems. Some input methods will have various problems, leading to input errors. It is best to use native input methods or input methods that are more popular on the market and can withstand public testing, and pay attention Uppercase and lowercase!

The fourth type is that although the password is correct, there are always problems with authentication. Later, it is discovered that one's MAC address has been filtered, causing the connection to fail. At this time, you can change the filtering rules or directly turn off the MAC address filtering function. Don't forget to remove your MAC address from the list! The specific steps are to type the IP address in the browser address bar. The default is 192.168.1.1. Press Enter to enter. Find Wireless Settings - Wireless MAC Address Filtering. Turn off filtering, or allow the MAC addresses in the list to access the network, or delete them directly. ID, everything is over.

Note: There are also incompatible encryption methods, problems with the mobile phone and computer itself, or problems with the router itself. I will not go into detail here. I believe everyone knows the solution. It is mainly to supplement the fourth method.

The above is the detailed content of Change the wireless password to 192161. For more information, please follow other related articles on the PHP Chinese website!