Home > Article > Computer Tutorials > How to turn off driver signature enforcement in Windows 7?
Method 1: Disable driver signature enforcement in Win764 system 1. Disable driver signature enforcement, which is done by Microsoft to improve system stability, but it is not without solutions. There are two There are two methods, one is a temporary method, which is only used for that time. When the system is restarted, the disablement will become invalid. If necessary, this method can be used again. Specific steps: When booting to system options, press the F8 key immediately to enter safe mode. You can press the F8 key early to avoid missing the time. 2. After entering the advanced mode, use the up and down arrow keys on the keyboard to move the cursor to the bottom, find and select "Disable driver signature enforcement", press the Enter key to confirm, you can enter the system, and then update the hardware driver without signing it. Famous driver. 3. The above is a one-time solution. If you want to disable driver signature enforcement for a long time, you need to use the following method. Open "All Programs" from the beginning, then find "Command Prompt" from the attachment, right-click, and select "Administrator" Run as . 4. After entering the command prompt window, enter the bcdedit.exe-setloadoptionsDDISABLE_INTEGRITY_CHECKS command at the cursor and press Enter. 5. If the forced driver signature disabling is successful, "The operation was completed successfully" will be displayed, and all subsequent driver installations will not be blocked by the driver signature. 6. If it is a Win8 system, the long-term blocking method is the same, but the temporary method is different. You can refer to the following article. 22Win8 driver update prompts that the third-party INF does not contain digital signature information. Method 2: Disable driver signature enforcement in Win732-bit system. 1. Disabling driver signature enforcement in Win732-bit and 64-bit systems are very different. If the update fails, it will not It says that a digital signature is required, but instead prompts that there is a problem with the device. For example, if the graphics card driver update is unsuccessful, it will prompt "Windows has stopped the device because there is a problem. (Code 43)". 2. The method for Win732 bit is the same as for XP system. Go to Group Policy to set it. The specific steps are to open the running program from the start menu. 3. In the pop-up run window, enter the gpedit.msc command and confirm to enter the group policy editing window. 4. In the Group Policy window, first find the "User Configuration" item, and then find "Administrative Templates" from its sub-items. 5. Under Administrative Templates, find the "System" item, and then find the "Driver Installation" item from its sub-items. 6. In the right window of the driver installation, find and select "Device Driver Code Signing", double-click this item to enter the properties window. 7. In the properties window, the default status is "Not configured". If you want to disable driver signature, first change it to "Enabled". 8. In the option box, open the drop-down box. The default is "Ignore". Change this item to "Warning", then press "Apply" to save, and then press "OK" to complete the setting. 9. If you want to update the driver at this time, restart the computer first, press F8 to enter safe mode, uninstall the driver to be updated, exit safe mode, and re-enter the Windows system normally. A warning box will pop up asking whether you want to prevent the system from automatically installing the driver. program, click Block at this time, and you must install the driver yourself.
The above is the detailed content of How to turn off driver signature enforcement in Windows 7?. For more information, please follow other related articles on the PHP Chinese website!