


Problem: Solution to the problem that the mac virtual machine does not open and has a black screen and no response Introduction: Many friends have encountered the problem of mac virtual machine not opening, black screen and unresponsiveness. This article will provide you with detailed answers and hope it will be helpful to you. Here are the solutions, please read on.
What to do if the virtual machine installed on an Apple computer has a black screen
Restart the computer and enter recovery mode. After installing VMWare, restart your computer and enter recovery mode (hold CMD R until the Apple logo appears). Select Utilities in the top menu and open Terminal. MacBook is a laptop computer launched by Apple in 2015.
Solution: Close other running applications to release system resources, clean up phone memory and close background processes. Additionally, the virtual machine may conflict with other applications or system components, causing a black screen or crash.
3. Check for other software conflicts: Some security software, drivers or other applications may conflict with VMware virtual machines, causing system instability. You can try disabling or uninstalling the software that may cause the conflict and see if the problem is resolved.
4. A system bug is the reason why a black screen appears when using an Apple virtual machine and then you go to the settings to activate Windows. The workaround is to power off the virtual machine and power it back on.
If the above method cannot solve the problem, you can try to perform a system recovery. Use a system restore tool to restore your computer to a previous, problem-free state. Please note that these are just suggestions and there is no guarantee that the problem will be solved.
6. For the problem of a black screen when installing and opening a virtual machine, it is usually caused by a mismatch in configuration or software compatibility. First, make sure that the selected virtual machine installation package is suitable for the current Mac system, and select a 32-bit or 64-bit installation package according to the number of bits of the computer system.
What should I do if my macbookpro has a black screen and is unresponsive?
Restarting the computer can solve temporary software problems by pressing and holding the power button for a few seconds, releasing it, and waiting for a while before starting it again. Resetting NVRAM or PRAM is also a way to solve the problem. After shutting down, hold down the Option, Command, P and R keys, and then turn it back on.
The steps to try to enter safe mode are as follows: Turn off your Mac Book and press the power button to start it. As soon as you hear the startup sound, hold down the Shift key. Release the Shift key when you see the gray Apple icon and progress indicator.
Check whether the computer has power and whether the power cord is plugged in tightly. Solution to the problem that the Apple laptop has a black screen when it starts and cannot be woken up: Check whether the battery is exhausted and press and hold the power button to restart the computer.
4. Confirm whether the power supply is connected: If the computer does not respond, first check whether the power supply is connected and whether the power supply is normal. Check whether the computer's LED light is normal. If nothing happens, try a different power cord or outlet and make sure the power switch is pressed.
What to do if your macbookpro has a black screen and is unresponsive
Restart the computer: Press and hold the power button for a few seconds, then release. Wait for some time and then press the power button again to start the computer. This usually resolves temporary software issues. Reset NVRAM or PRAM: Turn off the computer, then hold down the Option, Command, P, and R keys, then press the power button to turn it on.
The monitor may be turned off (if you are using an external monitor), preventing you from waking up. At this time, turning on the external monitor can solve the problem. Your Mac may be in safe sleep and unable to wake up. To wake from safe sleep, press the power button. Shutdown prevents waking up.
Try to enter safe mode: shut down your Mac Book. Press the power button. As soon as you hear the startup sound, hold down the Shift key. Release the Shift key when you see the gray Apple icon and progress indicator (which looks like a spinning gear).
If the black screen is caused by software, taking the Windows system as an example, we can restart the machine and press the F8 key several times when booting to bring up the system's startup options menu. After the system startup options menu appears, choose to enter safe mode.
Check if the power-on line is abnormal: Use an external power supply to power the mobile phone, and use a power meter to check if there is any change in the display. If there is no change, it is likely that the power-on line is broken or the power-on button has poor contact.
The inability to wake up from a black screen on a macbook will be affected by its own settings and the activities of applications, networks, and connected devices. Here are the specific solutions to the specific problem: The monitor may be turned off (if you are using an external monitor), preventing you from waking up. At this time, turning on the external monitor can solve the problem.
How to deal with the problem that the virtual machine cannot be opened in the mac Apple computer
Look at the network adapter in the lower right corner of the virtual machine to see if the icon has a green light flashing. If the network adapter is gray Prove that the virtual machine's network is not turned on, but disabled. Right-click the adapter, open [Settings], and check [Connected] and [Connect at startup].
Secondly set the virtual machine installation settings so that VMware supports macOS virtual machines. Finally, allocate memory space and configure the vmx file to solve the problem of being stuck on the white Apple interface.
The first step is to open VMWare, find "Window" - "Virtual Machine Resource Library" in the top menu bar and find the virtual machine to solve the problem in the list. I directly use Bootcamp to make the virtual machine. So select Bootcamp and right click.
The new security features of macOS 13 High Sierra will prevent the installation of external kernel extensions, so the installation will always be intercepted by the system. Directly open System Preferences, click Allow, find VMvare and check it, then exit and open the virtual machine in VMvare again and there will be no problem.
Macbook is stuck with a black screen when installing vmware13
1. There are many reasons for a black screen during the installation process. It is recommended to find the reasons one by one: Poor heat dissipation. The monitor, power supply and CPU generate heat during work. It is very large, so it is very important to maintain good ventilation. If the monitor overheats, it will cause color and image distortion and even shorten the life of the monitor.
2. First check whether the contact is good. You can separately check whether the contact between the graphics card and the monitor is good, and whether the contact between the graphics card and the motherboard I/O slot is good. If necessary, remove it and reinstall it to ensure that the installation is in place and the contact is good.
3. It means that your Mac installation has failed, but you can use darwin. Boot the iso to see if it can start successfully. If not, delete the system and install it again. Also, try to keep China Unicom connected to the Internet during installation and have a large enough system disk.
Conclusion: The above is what this site has introduced to you about the mac virtual machine not opening, black screen and no response. I hope it will be helpful to you. If you still want to To learn more about this, remember to bookmark and follow this site.
The above is the detailed content of How to solve the problem of black screen and unresponsiveness after opening the Mac virtual machine. For more information, please follow other related articles on the PHP Chinese website!

ip与mac绑定是指将特定的IP地址与特定的MAC地址关联起来,使得只有使用该MAC地址的设备才能够使用该IP地址进行网络通信。ip与mac绑定可以防止被绑定的主机的IP地址不被假冒,前提条件:1、MAC地址是唯一的,并且不可假冒;只能绑定与路由器直接相连的网络上的主机(也就是主机的网关在路由器上)。

mac版下载的意思是当软件在选择安装时,选择MAC版下载;Windows版和MAC版是两个不同的操作系统,所以大多数软件在选择安装的同时需要选择Windows版还是MAC版。

mac鼠标滚轮相反的解决办法:1、打开mac电脑,点击屏幕的苹果标志,然后选择“系统偏好设置”;2、在“系统偏好设置”窗口中,选择“鼠标”;3、在“鼠标”窗口中,将“滚动方向:自然”前面的勾去掉即可。

修复 SMB 文件共享在 MacOS Ventura 中不起作用的问题从 Apple 菜单打开 Mac 上的“系统设置”应用程序转到“常规”,然后转到“共享”找到“文件共享”的开关并将其关闭通过转到 Apple 菜单并选择重新启动来重新启动 Mac重新启动后,返回共享系统设置面板并将“文件共享”重新设置为打开位置像往常一样恢复文件共享,它应该按预期工作如果 MacOS Ventura Mac 与另一台 Mac 或设备之间的文件共享突然再次停止工作,您可能需要在几天后或随机重复此过程。

显示器关闭时如何防止 Mac 休眠如果您希望 Mac 显示器能够在整个计算机不进入睡眠状态的情况下关闭,请在此处进行适当的设置调整:下拉 Apple 菜单并转到“系统设置”转到“显示”点击“高级...”切换“防止显示器关闭时电源适配器自动休眠”的开关现在 Mac 显示屏可以关闭,同时防止 Mac 本身进入睡眠状态。这可能主要与 Mac 笔记本电脑用户相关,但即使是那些没有 MacBook 的用户也可能会发现该功能很有用。

mac的shift键是fn键上方、caps lock键下方的一个键,该键在键盘最左侧,由右下往上数第2个键;shift键是键盘中的上档转换键,可以通过“Ctrl+Shift”组合键来切换输入法。

mac克隆全称mac地址克隆,是固化在网卡上串行EEPROM中的物理地址,通常有48位长。mac克隆一般应用在路由器上,用户在用电脑直接拨号上网,后来又加了个路由器,通过路由器来实现多台电脑同时上网,这时要用到mac地址克隆了,就是把当前的电脑的mac地址克隆到路由器中去,因为运营商是把你的电脑mac地址绑定你的账号的,所以得克隆以后才能用。

mac解压rar的软件:1、The Unarchiver,是一款完全免费、小巧,而且非常易于使用的压缩、解压缩小工具;2、Keka,是一款免费、实用的压缩、解压缩工具,支持解压缩RAR格式的压缩包;3、360压缩大师,是一款免费的压缩、解压缩软件,完全支持RAR文件解压;4、MacZip,支持包括RAR在内的超过20种压缩格式的解压;5、BetterZip;6、FastZip。


Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.

PhpStorm Mac version
The latest (2018.2.1) professional PHP integrated development tool

DVWA
Damn Vulnerable Web App (DVWA) is a PHP/MySQL web application that is very vulnerable. Its main goals are to be an aid for security professionals to test their skills and tools in a legal environment, to help web developers better understand the process of securing web applications, and to help teachers/students teach/learn in a classroom environment Web application security. The goal of DVWA is to practice some of the most common web vulnerabilities through a simple and straightforward interface, with varying degrees of difficulty. Please note that this software

SublimeText3 English version
Recommended: Win version, supports code prompts!

ZendStudio 13.5.1 Mac
Powerful PHP integrated development environment
