How to achieve 45-degree rotation of components in AD

Ad10How to rotate components left and right!

1. When rotating the component in AD, you can use the shortcut keys X and Y, or you can use component settings.

2. First, open Altium Designer on your computer and enter the page, as shown in the figure below. Enter Altium Designer and click file--open, as shown in the figure below. Open your own pcb file, as shown in the picture below.

3. Click on DXP-preferences, set the angle to 10°, as shown in the picture, then copy a line segment and press the space bar to rotate. Each time you press it, it will rotate at an angle of 10 degrees.

DXP schematic component rotation is changed to 45 degrees

1. Select the component in the component library and place it normally in the schematic diagram; Double-click the component to be rotated; enter the component property setting interface, select different rotation angles in the orientation options below, and click OK to complete the rotation.

2. Find the tool - parameters: rotation angle: as shown in the figure: In addition, the cursor settings and saved steps are also here.

3. Double-click the component to manually enter the specified angle. Or change the Rotation Step (rotation step value) from 90 to 45 in Preferences PCB Editor General, so that the rotation angle will be 45° every time you press the space bar to rotate the device.

4. In the PCB interface, double-click the component to bring up the property setting dialog box. In the component property setting area, there is a "rotation" angle setting, which can be any angle.

How to rotate the ad component by angle

You can use the shortcut keys X and Y to rotate the component in AD, or you can use the component settings.

Select the component in the component library and place it normally in the schematic diagram; double-click the component to be rotated in the schematic diagram; enter the component property setting interface, and select different rotation angles in the orientation options below. Click OK to complete the rotation.

You can use the shortcut keys X and Y when rotating components left and right in AD, or you can use component settings.

Open the Altium Designer (AD) software and open a PCB project. For a clearer demonstration, the excess layers have been hidden, and some auxiliary lines have also been added.

Open AltiumDesigner and load the PCB file through File. Select the components to be flipped, which can be one or more. The software starts to perform the flip operation. The specific time depends on the number of selected components. After completion, you can see that the selected area has been flipped 180 degrees, and the top layer will be switched to the bottom layer.

If you want to place the lines at an angle, you need to modify the wiring method first and change it to AnyAngle supervision mode. If you want to adjust the wiring angle, press shift and space to select 45°C, right angle, arc, or any angle.

How to rotate the device pad 45 degrees in AD10?

1. Double-click the component to manually enter the specified angle. Or change the Rotation Step (rotation step value) from 90 to 45 in Preferences PCB Editor General, so that the rotation angle will be 45° every time you press the space bar to rotate the device.

2. Open the Altium Designer (AD) software and open a PCB project. For a clearer demonstration, the excess layers have been hidden, and some auxiliary lines have also been added.

3. Click on DXP-preferences, set the angle to 10°, as shown in the picture, then copy a line segment and press the space bar to rotate. Each time you press it, it will rotate at an angle of 10 degrees.

4. You need to enter the edit inside the lib to edit and modify the pad position.

The above is the detailed content of How to achieve 45-degree rotation of components in AD. For more information, please follow other related articles on the PHP Chinese website!