Home >System Tutorial >LINUX >Steps to delete virbr0 network card on CentOS7
Steps to delete virbr0 network card on CentOS7
- 王林forward
- 2024-01-15 12:24:051103browse
Note: I have configured bridge under CentOS7 before. Now after changing the bridge mode to normal mode, you can still see a lot of junk information when checking the network card. If you want to completely delete the unwanted network card configuration information, do the following:
[root@linux-node1 ~]# ip add list 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:9b:7d:d6 brd ff:ff:ff:ff:ff:ff inet 10.10.10.11/24 brd 10.10.10.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fe9b:7dd6/64 scope link valid_lft forever preferred_lft forever 4: virbr0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN qlen 1000 link/ether 52:54:00:f4:24:05 brd ff:ff:ff:ff:ff:ff inet 192.168.122.1/24 brd 192.168.122.255 scope global virbr0 valid_lft forever preferred_lft forever 5: virbr0-nic: <BROADCAST,MULTICAST> mtu 1500 qdisc pfifo_fast master virbr0 state DOWN qlen 1000 link/ether 52:54:00:f4:24:05 brd ff:ff:ff:ff:ff:ff
View network list:
[root@linux-node1 ~]# virsh net-list Name StateAutostart Persistent ---------------------------------------------------------- defaultactive yes yes
Use "virsh net-destroy default" to delete
[root@linux-node1 ~]# virsh net-destroy default Network default destroyed
Remove from configuration file
[root@linux-node1 ~]# virsh net-undefine default Network default has been undefined
Restart libvirtd service
[root@linux-node1 ~]# systemctl restart libvirtd.service [root@linux-node1 ~]# virsh net-list Name StateAutostart Persistent ---------------------------------------------------------- [root@linux-node1 ~]# ip add list 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP qlen 1000 link/ether 00:0c:29:9b:7d:d6 brd ff:ff:ff:ff:ff:ff inet 10.10.10.11/24 brd 10.10.10.255 scope global eth0 valid_lft forever preferred_lft forever inet6 fe80::20c:29ff:fe9b:7dd6/64 scope link valid_lft forever preferred_lft forever
Check again and find that unnecessary information has been cleared, which makes it much cleaner
The above is the detailed content of Steps to delete virbr0 network card on CentOS7. For more information, please follow other related articles on the PHP Chinese website!