How to use HyperTerminal correctly

How to use HyperTerminal? How to use HyperTerminal?

HyperTerminal (HyperTerminal) is a serial communication tool that comes with the Windows operating system. It can be used to connect to serial devices, such as routers, switches, etc., and interact with these devices in a console manner. The following are the steps to use Hyper Terminal:

1. Start Hyper Terminal: Search for "Hyper Terminal" in the Windows "Start" menu, and then double-click to open it.

2. Configure serial port connection parameters: Select "File" -> "New Connection", enter the connection name in the pop-up dialog box, select the serial port number and baud rate to be connected, and configure the data bits , parity bit, stop bit and other parameters to facilitate communication with the device to be connected.

3. Connect to the device: Click the "OK" button to connect to the target device. If everything is fine, you will see your device's command prompt in the HyperTerminal window.

4. Execute the command in the Hyper Terminal window: Enter the command to be executed in the Hyper Terminal window and press the "Enter" key to send it. The device will return corresponding output results and display them in the HyperTerminal window.

5. Disconnect: After completing the operation, you can choose to close the HyperTerminal window or select "Connect" -> "Disconnect" from the menu to disconnect from the device.

It should be noted that when using HyperTerminal to connect to a device, you need to ensure that the connection parameters are correct and avoid misoperations during command execution that may cause device failure.

How to open computer hyper terminal?

The method of opening HyperTerminal on your computer depends on the operating system you are using. Here's how to open HyperTerminal on different operating systems:

On Windows operating systems, there are several ways to open HyperTerminal (also known as Command Prompt). The following are two common methods:

Method 1: Use the shortcut key

to press the "Win R" key combination to open the run dialog box.

Enter "cmd" or "cmd.exe" and click "OK" to open the Hyper Terminal.

Method 2: Use the Start menu

Click the "Start" button and select the "Windows System" folder.

In this folder, find and click "Command Prompt" or "Command Prompt (Administrator)" to open the Hyper Terminal.

On the Mac operating system, the HyperTerminal application is called Terminal. Here's how to open Terminal:

Method 1: Use Spotlight Search

Click the magnifying glass icon in the upper right corner of the screen to open Spotlight Search.

Enter "terminal" in the search bar, and then click "Terminal" in the search results to open the terminal.

Method 2: Use Launchpad

Open Launchpad, you can find the icon on the Dock bar (gray appearance, with a sun and an elephant icon on it).

Find and click "Terminal" in Launchpad to open the terminal.

No matter which operating system you use, after opening HyperTerminal, you will be able to enter commands and perform various operations, such as managing files, running programs, etc. Please note that HyperTerminal may require administrator rights to execute certain commands. If administrator rights are required, make sure to open the terminal as an administrator.

What is HyperTerminal and how to use commands?

HyperTerminal is a program that can be called to connect to other computers, Telnet sites, bulletin board systems (BBS), online services, and host.

We can use it to debug whether the circuit is feasible.

The following are some commonly used operations on HyperTerminal: clearing the screen can be achieved by sending 0x0C (12).

Sometimes a message may be sent but not received correctly. Sending 0x0C twice in a row can ensure reliable screen clearing; backspace the cursor (note that this does not delete characters): send 0x08 (8); move the cursor one to the right. Tab character (equivalent to the TAB key): send 0x09 (9); move the cursor to the beginning of the line: send 0x0D (13); move the cursor to the next line in the same column: send 0x0A (10) or 0x0B (11); Easy to understand: by sending 0x0D and 0x0A, the line break function can be achieved.

The HyperTerminal application is relatively simple, similar to ordinary serial port software. Here are a few more troubleshooting questions: 1. When the HyperTerminal is maximized, the actual screen remains unchanged.

Cause: The terminal screen size of "HyperTerminal" is determined by the font size used.

It will display itself as 24 lines of 80 or 132 characters each in the chosen font.

Solution: On the HyperTerminal View menu, select Fonts.

If you want a larger terminal screen, choose a larger font.

If you want a smaller terminal screen, choose a smaller font.

2. The typed information is not displayed on the HyperTerminal.

Cause: The information displayed on the terminal screen is sent from the remote computer, not the information that has been entered on the local computer.

In order to view the typed information, the remote computer must be able to feedback the input information.

This may cause a time lag between the input information and the information displayed on the terminal screen.

Solution: Please ensure that the connection to the remote computer is correct, and the remote computer can feedback user input information.

3. ANSI characters cannot be displayed correctly.

Cause: Terminal font is not used.

Solution: On the HyperTerminal View menu, select Fonts.

Click "Terminal" and select "OK".

4. After connecting to the remote computer, the terminal screen displays meaningless information.

Cause: The correct terminal emulation type was not selected.

Solution: On the HyperTerminal File menu, select Properties.

Select the "Settings" tab.

In the "Emulation" drop-down box, select the terminal type of the remote computer.

If the remote computer type is not listed in the drop-down box, HyperTerminal does not support that type.

5. Characters cannot be deleted from the terminal.

Cause: The connected remote computer already controls the characters displayed on the terminal screen.

The remote computer expects the cursor to be positioned at a specific location on the screen based on the data that has been sent to the screen.

If you change this screen locally, you could potentially disrupt your interaction with the remote computer in a way that the host cannot predict or control.

Therefore, HyperTerminal does not allow characters to be removed from the screen.

Solution: No.

6. Data cannot be pasted to the terminal screen using CTRL V.

Cause: If the "Terminal Key" is set in the connection properties, pressing CTRL V will send an escape sequence to the emulator.

Many hosts use CTRL V to navigate their systems.

Solution: You can change this setting to "Windows Key" and then CTRL V will work properly.

To change, click "Properties" in the HyperTerminal "File" menu.

Click the Settings tab and click the Windows Key radio button.

Key Points When using the "Windows Key" setting, all function keys, arrow keys, and control keys will be executed locally.

The recommended option is: use the "terminal key" setting, and then use the menu to paste.

set interface trust ip Set the IP address of the port inside the firewall set interface untrust ip Set the IP address of the port outside the firewall set admin sys-ip Set the system IP address unset all Clear all information

How to connect to console in win11 ?

First install HyperTerminal, either CRT or Xshell, then use the console cable to connect the console port of the device, right-click My Computer, Management, Device Manager, COM port, and check which COM port the console uses.

Then open the HyperTerminal software, connect settings, select serial for the protocol, choose whatever port you want from comX, the baud rate is 9600, the baud rate of network equipment is mostly 9600, and other default configurations are fine, so you can Log in to the device command line

win11 Is there a Hyper Terminal?

Win11 has Hyper Terminal. It is a super easy-to-use win11 system. It has a more stable and smooth running experience in win11 super terminal, brings users the ultimate opening speed, and can support the compatible operation of various software. The following introduces the advantages of win11 Hyper Terminal:

1. The system basically provides security tools to prohibit the built-in account acceptance mode of the pipeline integrator.

2. Basically, themes from other companies will not be added. Also break the theme and add what you want.

3. Ensure the best balance between speed and stability and solve the problem of slow installation speed on some computers.

4. According to the user's usage environment and actual needs, you can freely choose the installation method to install the image.

What is win11 terminal?

Win11 has Hyper Terminal. It is a super easy-to-use win11 system. It has a more stable and smooth running experience in win11 super terminal, brings users the ultimate opening speed, and can support the compatible operation of various software.

The above is the detailed content of How to use HyperTerminal correctly. For more information, please follow other related articles on the PHP Chinese website!