Can't copy to mac external hard drive?

This article will introduce the problem that the Mac external hard drive cannot be copied. I hope it can be helpful to everyone. Let’s take a look.

Why can’t I copy files from Apple computers to a mobile hard drive?

1. Hard drive damage or hard drive file system damage is a common fault. If there is a problem with your Mac system, it may not operate properly when connecting the hard drive to the computer. This may be because there is a problem with the hard drive itself, or the hard drive file system is damaged and the data cannot be read. No matter what the situation is, professional technical support is needed to repair the hard drive or recover data. Therefore, if you encounter this kind of problem, it is recommended to seek professional help to avoid further data damage.

Normally, the newly purchased hard disk has been partitioned and formatted by the manufacturer before leaving the factory, and it is pre-formatted into a usable file system. Therefore, we can use the hard drive directly after purchase without any further partitioning or formatting operations.

Usually, Mac cannot copy files to a mobile hard drive because the Mac operating system does not support the writing function of the NTFS file system. This is caused by the file system used by Mac being incompatible with NTFS.

Compatibility between hard drive file systems and Mac computers is a common issue. The main reason is that Mac computers cannot directly write to NTFS formatted hard drives, they can only read them. If you want to write files to a mobile hard drive or USB flash drive on your Mac, you may consider formatting the hard drive in exFAT or FAT32 format. These formats can be read and written on both Mac and Windows systems. In addition, you can also install third-party software to solve the problem of NTFS write permissions. In short, choosing the appropriate file system format can avoid compatibility issues and make it easier for you to copy and copy files on your Mac.

What should I do if Mac files cannot be dragged to the hard disk?

To solve the problem of "How does Mac operate NTFS formatted disks" is actually very simple. You only need to install an NTFS for Mac reading and writing tool. Can. In this way, you can directly read and write NTFS-formatted disks on your Mac. But be aware that if the hard drive is damaged or the hard drive file system is damaged, you may not be able to operate it even if you connect the hard drive to your Mac computer. Therefore, when dealing with this type of problem, you need to detect and repair the hard drive, or seek professional data recovery services to help solve it.

After opening your Mac laptop, connect the mobile hard drive via USB cable, and you will see a hard drive icon on the desktop. When you right-click on the icon, you will notice that there is no option to copy it. This shows that the mobile hard disk is formatted in the Windows system format by default and can only be accessed in read-only mode under MacOS.

If the hard drive can be used, but "Mac files cannot be saved to the hard drive" still appears, you can check whether the computer recognizes the hard drive. The easiest way is to open Disk Utility and check whether the disk is displayed in the left sidebar.

Solution to the problem that the mac system cannot copy files to the hard disk U disk

First, insert the hard disk or U disk into the computer. Then, press the [Space] shortcut key to open the [Disk Utility] window. Select the disk according to the actual situation, as shown in the figure below.

2. After opening the Mac laptop, connect the mobile hard drive via USB cable, and you will see a hard drive icon on the desktop. When you right-click on the icon, you will notice that there is no option to copy it. This shows that the mobile hard disk is formatted in the Windows system format by default and can only be accessed in read-only mode under MacOS.

3. If the hard disk is in NTFS format, just install an NTFS for Mac reading and writing software on your Mac. Chiyou NTFS Assistant If the hard disk is damaged, determine whether the file system or file itself is damaged, or whether it is physically damaged, and then solve the problem. If the project or disk has permissions, just change the permissions.

4. Open the terminal and type the command in brackets { diskutil info /Volumes/hard disk name | grep UUID }. Replace the "hard disk name" in the command with the name of your mobile hard disk, and then press Enter. You can see your hard drive serial number UUID.

MACBOOK cannot copy things to the removable hard drive

The hard drive is damaged or the hard drive file system is damaged. If there is some problem with the Mac system, it is very likely that the hard drive will not operate when connected to the computer. Mac system failure If there is some problem with the Mac system, it is very likely that the hard drive will become inoperable even if it is connected to the computer.

First you can check the partition format of the mobile hard disk. The picture below shows a mobile hard disk in NTFS format and is in a read-only state. At this time, I right-clicked on the NTFS-formatted mobile hard disk and found that there was no "New Folder" option.

The hard disk file system is not compatible with Mac computers. This is the most common reason why "Mac cannot copy and write files to the external hard drive". If your hard drive or USB flash drive is an NTFS file system, Mac does not have "write" permissions for NTFS-formatted hard drives, only "read" permissions.

In most cases, files on Mac cannot be copied to the mobile hard drive. This is caused by the incompatibility between the Mac operating system and the hard disk file system. That is, the hard disk is in NTFS format and Mac does not support "writing".

Normally, after plugging the mobile hard drive into the USB port of your Apple computer, it should be automatically recognized and appear on the desktop. Then, you can open "Finder", find the file or folder you want to copy, and then drag it to the icon of the mobile hard disk to complete the copy.

Mac cannot copy and write files to the mobile hard disk, what should I do with the USB flash drive?

1. Follow the wizard prompts and restart the computer to complete all configurations. After the Mac restarts, open the Mac "Preferences" and you will see the icon of this software. Just double-click it to open it.

2. After opening the Mac laptop, connect the mobile hard drive via USB cable, and you will see a hard drive icon on the desktop. When you right-click on the icon, you will notice that there is no option to copy it. This shows that the mobile hard disk is formatted in the Windows system format by default and can only be accessed in read-only mode under MacOS.

3. Open the terminal and type the command in brackets { diskutil info /Volumes/hard disk name | grep UUID }. Replace the "hard disk name" in the command with the name of your mobile hard disk, and then press Enter. You can see your hard drive serial number UUID.

4. It is found that the Apple computer cannot copy files to the mobile hard disk or U disk. You should use the system's own disk tool to format the mobile hard disk or U disk as exFAT, and then copy the files to the mobile hard disk or U disk again. Inside. Tutorial on formatting mobile hard drives and USB flash drives: Select Disk Utility in LaunchPad.

5. Insert the mobile hard disk into a Windows computer (an Apple computer with dual systems installed will also work) and open the resource manager. Right-click the mouse to select the target hard disk or USB flash drive and click Format. Set the file system to exFAT.

Solution to the problem that the mobile hard disk cannot copy files on Mac

Format settings. The format can be FAT or ExFAT. After setting, click OK. After the formatting is completed, you can find the copy option in the right-click option, and you can also copy the file.

The reason why it cannot store files normally is mainly caused by the disk file system format, which can be solved by a third-party software. First, you need to install a paragon ntfs for mac reading and writing tool on your mac. This software can be downloaded directly from the official website. Double-click the NTFS for Mac software installation package to start the installation.

After opening your Mac laptop, connect the mobile hard drive via USB cable, and you will see a hard drive icon on the desktop. When you right-click on the icon, you will notice that there is no option to copy it. This shows that the mobile hard disk is formatted in the Windows system format by default and can only be accessed in read-only mode under MacOS.

Conclusion: The above is a summary of the answers to the issues related to the inability to copy a Mac external hard drive that this site has compiled for you. I hope it will be helpful to you! If your problem is solved, please share it with more friends who care about this problem~

The above is the detailed content of Can't copy to mac external hard drive?. For more information, please follow other related articles on the PHP Chinese website!