Home  >  Article  >  System Tutorial  >  Recommended mac hard drive suitable for dual system installation

Recommended mac hard drive suitable for dual system installation

PHPz
PHPzforward
2024-01-13 12:24:171045browse

Introduction: In this article, this site will introduce to you the relevant content about Mac dual system hard drive recommendation. I hope it will be helpful to you, let’s take a look.

Mac dual system installation [dual hard drive, one mac, the other win8]

1. Step 1: Back up data Before installing dual systems, you must back up important data in your Mac computer . Because some errors may occur during the installation process, resulting in file loss. You can use an external hard drive to back up your data, or you can use an online storage service such as iCloud to back up your data.

2. (Please see the picture below for details) There are two options in the selection box: "BootCamp windows" and "Macintosh HD". Select "BootCamp windows", and then click "Restart" in the lower left corner. The win system can be set as the default startup system.

3. After installing WIN8, your display settings may be abnormal and you may not be able to access the Internet. It doesn't matter. You need to install Apple-specific drivers.

4.,. After installing win8 in the optical drive, firstly: mac does not support bootcamp for win8 and cannot install the driver; secondly, unless you use win8 ghost to boot every time, the disk will not be recognized at startup.

5. It can be divided into two partitions, but if it is a win7 operating system, it will not matter if it is two areas. If it is win8, it is still one area. The applications and cache in the win8 app store and other Everything is on the C drive. If you use win8, you will find that win8 eats the hard disk.

MAC system, using dual systems, I want to download something, which disk is better to download?

1. I also use an Apple computer, which is usually divided into three disks, one is the windows system disk , one is the Apple system disk, and the other is the disk shared by the two systems. No matter which system's software is installed on this disk.

2. If it is read-only, you cannot save or modify it. How did that partition come about? If it doesn't work, just use disk management to merge that partition back to macintosh hd. Things under Mac can be saved to the Mac partition or bootcamp, but under Win you cannot change the things on the hard drive where the Mac system is located.

3. The computer downloads can be placed on the C drive or D drive. However, it is recommended to put it in the D drive, because the C drive is a system drive. If too much memory is used, the computer will freeze and the running speed will slow down; while the D drive is not a system drive, it will not affect the operation of the system if the memory is full. .

Recommended mac hard drive suitable for dual system installation

Can I ask for advice on how to install dual systems on Apple computers and allocate hard drives?

After the Win10 installation is completed, right-click "This Computer" on the desktop---Manage ---Disk management, format the two blank partitions as NTFS (actually, it is mainly for Windows and Apple to share the partition), and reassign the drive letters to the blank partitions, so that they become D and E drives.

VISTA does not have this problem. So put XP here when partitioning. Then click the "Repair Disk" option, wait for the system to repair the disk, and then restart the computer. After re-entering the Mac system, we can use BootCamp to partition again.

First close CoreStorage. We need to open the terminal, enter the command sudo diskutil CoreStorage revert / and press the Enter key, enter the password, and restart the Mac after the execution is completed. Install Windows using Boot Camp.

Generally, the partition cannot be expanded after dual-system installation. Of course, you can also clear Windows, repartition it, and then install Windows (bootCamp method). The partitioning steps are as follows:\x0d\x0a1: Preparation, use Apple's installation CD, and don't worry about it when booting to the first step.

How to partition the Apple macbook with dual systems?

Restart the Mac and press the Option key to select the Mac system to enter. -Open Disk Utility, select the entire hard drive, and select partitions. -Select the MacintoshHD partition, press to add the required partition, allocate the size according to your needs, and select exfat as the format. Both systems can access this format. -Select Apply after allocating. Just restart your Mac.

Method 1: (Divide an F drive directly from the E drive) Right-click "This Computer" on the desktop---Manage---Disk Management---Select E drive---Compress volume ---Input the size of the new partition (F drive) to be split into the "Input compression space (MB) (E)" ---Compression---. Insert the Apple system disk.

First, open the Control Panel and select "Administrative Tools" - "Disk Management".

What mobile hard drive is suitable for dual systems

It is recommended that you use ExFAT format mobile hard disk, or NTFS format mobile hard disk NTFS For Mac software to achieve compatibility. The detailed explanation is as follows: First of all, the hard disk compatibility problem is a format problem.

It is completely feasible, but ordinary usb0 mobile hard drive boxes do not support a protocol for solid state drive acceleration. Go to Xianyu and search for type-c mobile hard drives. You can find Ficom’s H1 hard drive box and install a solid state drive. Go in, and the actual reading and writing can reach more than 400m. Then install win10, everything is fine.

Yes, all of the above are acceptable. But I don’t think it’s necessary. You can install the system on the main hard drive and use a removable hard drive if you need to store data. It is unnecessary to install the system on the mobile hard disk. What you are worried about is limited storage space.

It should be that mobile solid-state drives run faster than mobile hard drives, and both systems can be installed and run.

First use DiskGenius (or PartitionGuru) to delete all partitions in the mobile hard disk. Since the subject is using the XP system, the partition table uses the MBR type. (Recommended steps) Open VMWare, create a new virtual machine, and select "Custom (Advanced)".

Create a boot disk. (W7 system 4GU disk, XP system 2G U disk) Download the Dabaicai U disk creation software, install the software, start it, and follow the prompts to create the boot disk. Insert the USB flash drive to boot, press DEL or other keys to enter the BIOS, set to boot from USB-F10-Y-Enter. Enter the pe system.

Conclusion: The above is all the recommended content of Mac dual system hard drive introduced by this site. I hope it will be helpful to everyone. If you want to know more about this, remember to bookmark and follow this article. stand.

The above is the detailed content of Recommended mac hard drive suitable for dual system installation. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:shouxicto.com. If there is any infringement, please contact admin@php.cn delete