Home  >  Article  >  System Tutorial  >  How is the MAC address binding between the virtual machine and the host implemented?

How is the MAC address binding between the virtual machine and the host implemented?

WBOY
WBOYforward
2024-01-13 12:09:11779browse

Introduction: In this article, this site will introduce to you the relevant content about how to bind the mac address of the virtual machine. I hope it will be helpful to you, let's take a look.

Introduction to how to change the mac address of a vm virtual machine

Select [Network Adapter] and click [Advanced]. There is a [Generate] button on the lower right side of [MAC Address], just click it, but it is recommended to click it a few more times, and then click Confirm to complete the modification.

This method is the most direct, simple and effective, just modify the MAC value of the relevant rc.local file in the Linux system. Method 2: Modify the *.vmx file of the virtual machine. This method is the most recommended, because it is similar to re-burning the "physical network card ROM" of the VMware virtual machine.

Open the virtual machine and click "Edit Virtual Machine Settings". Click "Hardware", "Network Adapter" and "Advanced" respectively, and then you can operate the MAC address of the network card. You can change the MAC address at will. After the change, make sure to save it and it will take effect. After starting the computer, the new MAC address will be used.

Change the MAC address of a virtual machine After a virtual machine is powered on, VMware Workstation automatically assigns a Media Access Control (MAC) address to each of its virtual network adapters. A MAC address is a unique address assigned to every physical network device.

Take VMware workstation as an example. In the virtual machine settings, network adapter, advanced, MAC address, manually change or click Generate, and then confirm, confirm to change the MAC address of its network card.

How to change the mac address of vm virtual machine

1. Open the virtual machine, click "Edit Virtual Machine Settings" 2. Click "Hardware", "Network Adapter" and "Advanced" respectively, and then you can The MAC address of the network card has been operated 3. You can change the MAC address at will. After the change, confirm and save, it will take effect. After starting the computer, the new MAC address will be used.

2. static means that the MAC of the VM's physical network card is statically set. You can change it to another MAC starting with 005056. If you are asked for the SSID when starting the VM after changing it, select "KeepAlways".

3. First open the virtual machine on your computer. After entering the main page, click the "File" option in the upper left corner. In the menu that opens, select the "Open" option. In the window that opens, select the option you want to To modify the MAC address of the virtual machine, click the Open button at the bottom.

4. Open the virtual machine and click "Edit Virtual Machine Settings"; click "Hardware", "Network Adapter" and "Advanced" respectively, and then you can operate the MAC address of the network card; you can change the MAC at will After changing the address, confirm and save it and it will take effect. After starting the computer, the new MAC address will be used.

5. Take VMware workstation as an example. In the virtual machine settings, network adapter, advanced, MAC address, manually change or click Generate, and then confirm. Confirm to change the MAC address of its network card.

How to bind IP and MAC addresses

1. Enter in CMD: netsh i i show in, find the "Idx" corresponding to "Local Area Connection" (the author's is "11", the following neighbors The following numbers are consistent with here.

2. (1) Insert a column before column A, and enter the command and parameter "ARP -S" to bind the MAC address in cell A1. (2) In MAC Insert 7 columns between the address and computer name columns, and the column numbers are D, E, F, G, H, I, J.

3. IP address and MAC address (i.e. physical address) pass ARP The protocol links the IP address and the MAC address together to transmit data packets. The IP address can be bound to the MAC address to determine the only computer on the network.

4. First, we turn on the computer Desktop, in the start menu, click Run, or you can press WIN+R, and then open. 2. Enter CMD in the dialog box and click ok. 3. Enter arp-a, press the lane key. Then you will see the following information shown, and record the Internet address and physical address in the picture below.

How is the MAC address binding between the virtual machine and the host implemented?

Conclusion: The above is what this site has compiled for you on how to bind the mac address to a virtual machine. The related content and answers have been summarized. I hope it will be helpful to you! If you solve your problem, please share it with more friends who pay attention to this problem~

The above is the detailed content of How is the MAC address binding between the virtual machine and the host implemented?. For more information, please follow other related articles on the PHP Chinese website!

Statement:
This article is reproduced at:shouxicto.com. If there is any infringement, please contact admin@php.cn delete