Solve the problem of stuck on white apple and enable iPhone 11 with full memory to boot normally

Some iPhone 11 users failed to back up and clean data in time when a message indicating insufficient memory appeared. As a result, the iPhone 11 suddenly shut down and restarted during use, stuck in the Apple logo state, and could not be turned on and restarted normally. What should I do?

I believe many people will say that they use iTunes to flash their iPhone, but they cannot retain the data and cannot back up the relevant data in the iPhone 11 which is in the white Apple state at this time.

Of course, there are other ways to fix the white apple problem. Here are two possible approaches: 1. Software reset: First, you can try to restore your device to factory settings. This will clear all data and settings but may resolve the white apple issue. You can perform a software reset by going into your device's settings menu, finding the General option, and selecting Reset or Restore. Please note that before performing a software reset, be sure to back up all important data. 2. DFU recovery mode: If software reset doesn’t work, you can try DFU recovery mode. DFU mode is a special recovery mode that can help fix software problems. First, connect your device to your computer and make sure you have the latest iTunes installed. Then, press and hold the Power button and Home button on your device until the screen goes black. Then, release the Power button but continue to hold the Home button. On iTunes, you will see a message saying that recovery mode has been detected. Follow the prompts on iTunes and choose to restore your device. Please note that doing a DFU recovery will delete all data, so be sure to back it up in advance. I hope the above methods can help you solve the white apple problem! Remember to back up important data before trying any method. If the problem persists, it is recommended to contact Apple customer service or professional technicians for further assistance.

Method 1: Force restart

When the iPhone encounters problems such as black screen, white apple, automatic restart, freeze, etc., the simplest solution is to force restart.

The general force restart operation method for full-screen iPhone is as follows: 1. First, quickly press the volume up and volume down keys at the same time, then quickly press the power button without releasing it. 2. Keep pressing the power button until the Apple logo appears on the screen. 3. Release the power button and wait for the iPhone to restart. Through the above simple operations, you can successfully force restart your full-screen iPhone. Please note that this operation will not affect your mobile data. If your iPhone is stuck or has other problems, force restarting is a common solution. Hope this method helps you!

If you have not backed up your iPhone data, it is recommended that you back it up immediately and clean up your phone until you ensure that your iPhone has enough storage space. If your iPhone cannot be turned on normally by force restarting, you can try method two to solve the problem.

Method 2: Use iOS system repair tools

Such as the Apple phone repair tool. This tool not only supports repairing black/white Apples, but also supports repairing more than 150 iOS/iPadOS/tvOS system problems. For example, the screen cannot be turned on, stuck in recovery mode, device restarts in an infinite loop, jailbreak fails and gets stuck, various system errors, etc.

In addition, you don’t need to worry about sending your phone to an external repair shop for repairs that may lead to data leakage on your phone. When using this tool, all operations are performed locally, without the need for an Internet connection. Moreover, the operation is very simple, and only 3 simple steps are needed to complete the repair of white apples. Furthermore, your data will not be lost when repairing your phone using standard mode.

Operation Guide:

Please make sure you have downloaded and successfully installed the required tools, and use a data cable to connect the device to the computer. Find and open the tool on your computer and select the "iOS System Repair" option. Follow the prompts to select options based on the type of device you have, and then select Standard Repair. This way you can start repairing your iOS system.

According to the instructions, you can choose to enter recovery mode or DFU mode. No matter which mode you choose, you'll need to follow these steps: 1. Make sure your device is turned off. If the device is on, press and hold the power button and slide the device to turn off. 2. Connect your device to the computer using a data cable. 3. Enter recovery mode: -For iPhone 8 and earlier devices, press and hold the Home button and the Power button simultaneously until you see the Connect to iTunes icon on your device screen. -For iPhone 4. Enter DFU mode: -For iPhone 8 and earlier devices, press and hold the Home button and Power button simultaneously for about 10 seconds, then release the Power button but continue to hold the Home button until you see a message on iTunes saying you have entered recovery mode . -For iPhone Press the volume down button until you see a message on iTunes saying you have entered recovery mode. 5. Open iTunes on your computer. If you haven't installed iTunes yet, please download and install it first. 6. On iTunes, you will see a prompt window showing that your device is in recovery mode or DFU mode. Click the "Recover" or "Restore" button as prompted, and iTunes will begin to restore your device. Please note that entering recovery mode or DFU mode will erase all data on your device. Therefore, please make sure you have backed up your important data before proceeding.

Once the software recognizes the device, it will automatically start downloading the firmware.

#After successfully downloading the firmware, just click the "Start Repair" button to upgrade. After the upgrade is completed, the iPhone will automatically start the device.

The entire upgrade process takes about 10 minutes. Be careful not to disconnect the data cable during the operation. Wait until "Repair Complete" is displayed to indicate that the upgrade is complete.

The above is the detailed content of Solve the problem of stuck on white apple and enable iPhone 11 with full memory to boot normally. For more information, please follow other related articles on the PHP Chinese website!