Easily reinstall your computer operating system using smart one-click system reinstallation

How to use smart one-click system reinstallation to reinstall the computer system

U disk installation system: Turn on the computer (press and hold DEL on desktops, generally press F2 on notebooks), set the computer BIOS to be installed, and press the "DEL" key on the first screen of the computer to enter the BIOS

(Some hosts may not be DEL but may be F2 or F1. Please follow the interface prompts to enter), select Advanced BIOS Features.

2. Set the Boot Sequence to USB-ZIP. First, the setting method is to press the PageUP or PageDown key on this item to switch options. After setting, press ESC to return to the BIOS main interface,

Select Save and Exit (save and exit BIOS settings, you can also press F10 directly, but not all BIOS support it) and press Enter to confirm exiting BIOS settings. Some computers can also be directly called up by pressing F8, F11, etc. to directly set up a smooth startup

3. After the setting is completed, insert the U disk you made into the USB interface (it is best to temporarily unplug other irrelevant USB devices)

Restart the computer and see the startup effect

4. Enter the first "Run windows PE (system installation)". The default is to enter PE. There are other tools in it, which will not be explained here. This is the PE system. There are many tools in the beginning, so I won’t list them in pictures. Enter pe system

Click the manual clone installation icon on the desktop (sometimes also named Ghost 32, etc.)

The interface that appears: click ok to enter ghost

The picture below shows the interface for entering ghost

Now we only explain the steps to install the system:

Click in sequence: local—partition—from image

The pop-up window is as follows:

In the drop-down browse list, select the location of your gho file. It is best to place the GHO file in the root directory e799bee5baa6e59b9ee7ad9431333337623433, so that it is easy to find. If the ghost software has a Chinese folder name, garbled characters will appear, which you cannot understand.

After selecting the GHO file, click open,

There is no good choice here, just click OK

In the window that appears now, you can select the disk you want to install (look at the size. Generally, the larger data is the hard disk, and the smaller one is the U disk), select the hard disk, and then click OK

After the following window appears, identify which drive your system will be installed on. Identify your drive letter from the disk size data in the size column. Generally, choose the first one, which is the C drive. After selecting, click OK.

Prompts you whether you really want to reinstall the partition. If you want to reinstall, click yes. If you don’t want to reinstall, click no.

15After completing the above steps, the system will be automatically reinstalled.

How to reinstall Android phone system

Reinstalling the system on a smartphone is usually called flashing.

1. Line brush

Use flash software, such as Flash Master, Flash Wizard, Zhuo Master, Bell Pepper, Deep Flash, and Qitu Flash.

2. Card swiping

Enter Recovery Mode Card Swipe

How to enter Recovery mode:

Method 1: If the phone is turned on, please turn it off first, remove the battery and then install it. While the phone is turned off, press and hold the power button and the Home button at the same time until the Recovery interface appears.

Method 2: If the above method cannot be used to enter, then turn on the phone again, first press and hold the volume button, and then press and hold the power button until the Recovery interface appears.

Recovery mode (power key to confirm, volume up and down keys to move), the steps are as follows:

1. Download the corresponding mobile phone flash rom from the Internet, and then copy it to the root directory of the SD card. The rom is in zip format (you can open it to verify it. The zip package must contain the META-INF folder to be the flash package. , but do not modify the files in the zip package) and do not unzip it.

2. Shut down completely (it is best to pick the battery after shutting down), and then enter the recovery interface through a special key combination.

3. Select wipe data/factory reset and press the power button to confirm, then select yes and press OK; then select wipe cache partition and press OK, select yes and confirm.

4. Select install zip from sdcard and press the power button to confirm, then select choose zip from sdcard and press the power button to confirm, then select the rom flash file, press the power button to confirm, then select yes and press the power button to confirm to start flashing.

The above is the detailed content of Easily reinstall your computer operating system using smart one-click system reinstallation. For more information, please follow other related articles on the PHP Chinese website!