Win10 automatic repair cannot be reset after startup

Many users will encounter problems when using their computers. For example, they cannot turn on or restart after entering automatic repair. This problem is quite troublesome. Here is a solution for you, let’s take a look.

What to do if win10 automatic repair fails to boot and reset:

Method 1. Enter safe mode to disable the independent graphics card driver

1. Press and hold the power button Shut down

2. Press the power button to turn on

3. Repeat steps 1~2 three times

4. If the "Repair" interface appears on the screen, click "Advanced Repair Options"

5. Click "Troubleshooting" -> "Advanced Options" -> "Startup Settings" -> "Restart"

6. After the system restarts, press the number 4 corresponding to "Safe Mode" to enter the safe mode

7. After entering the safe mode, press Win

#Method 2. Disable the online banking driver

Enter safe mode and try to check under C:windows/system32/drivers/ to see if there are PECKP and sys drivers.

If the program has been changed, please rename the driver and restart the computer.

This driver is the online banking assistant keyboard saver

Method 3. Enter the motherboard BIOS and turn off the secure boot

Restart the computer Enter the BIOS: After restarting the computer, continuously press the "Del" key in the lower right corner of the keyboard to enter. Generally, the "F2" key is used on laptops

Find the option and close it .

Press the up, down, left and right keys on the keyboard to select each navigation folder. Generally, the SecureBoot option can be found in the navigation folder.

means that SecureBoot is on. We press the keyboard to jump to this option.

Press the keyboard again, select Close SecureBoot,

Select and press, then press the key and press OK to save the BIOS configuration.

The above is the detailed content of Win10 automatic repair cannot be reset after startup. For more information, please follow other related articles on the PHP Chinese website!