How to realize the one-click ghost function of quickly restoring the system in win7

How to use one-click ghost to restore the system in win7

1. First, make the u disk into a u boot u disk boot disk, restart the computer and wait for the boot screen to appear. Press the startup shortcut key, select the u disk boot to enter the u boot main menu, and select "[02] u boot Win8PE ( New machine)" option, press the Enter key to confirm and expand all

2. After entering the win8PE system, the installation tool will pop up on its own. Click "Browse" to select the win7 system image file and save it to the USB disk.

3. Wait for u to start the pe installation tool to automatically load the win7 system image package installation file. Just select the installation disk location and click the "OK" button.

4. Click the "OK" button directly in the pop-up prompt window.

5. Then the installation tool starts to work, please wait patiently for a few minutes.

6. After completion, a prompt to restart the computer will pop up, click the "Yes (Y)" button.

7. At this time, you can remove the USB disk and restart the system to start the installation. We do not need to perform any operations. We can just wait for the installation to complete. We will restart once before finally entering the system desktop.

About how to use the one-click restore that comes with win7

Download and install one-click recovery software

First download the one-click restore software on the Internet and run it. Please double-click the installation package to install:

Click the "Next" button in the first interface that pops up from the installer to continue:

In the pop-up software agreement window, select "I agree to the terms of the license agreement" and click the "Next" button to continue:

After the installation is completed, a shortcut to the program will be created on the desktop and start menu:

Set one-click restore function

Open the main interface of the software and click the "Advanced Options" button to enter the setup wizard.

The configuration wizard will enter the "Advanced Options" interface, check the two check boxes of "Add Password Function" and "Add Power-on Hotkey Settings", and then click the "Settings" button:

Since you just selected "Use Password Function", a prompt box to enter a password will pop up after clicking the "Settings" button:

After entering the password, click the "OK" button, and the prompt box to confirm the password will pop up again:

Enter the same password again to confirm and click the "OK" button;

Similarly, since we checked "Add boot hotkey" above, a dialog box for selecting a hotkey will pop up:

Generally, you can use the default one. Click the "OK" button to pop up the dialog box for setting the boot delay:

Just use the default delay. Click the "OK" button to pop up the "Hotkey Setting End" dialog box to complete the setting.

Restore system

When "Pressto Run WinGho" is displayed on boot, we can automatically enter system restore by pressing the F11 key:

You can also start the one-click restore software in the Windows system and click the "Restore System" button in the main interface:

The "Restart computer now to confirm" dialog box pops up:

Click the "Yes" button in the dialog box, the computer will restart and automatically enter the GHOST system restore:

After the one-click restore is completed, a window indicating the end of the one-click restore will pop up:

Click "Restart" or wait for a while and the computer will automatically restart.

The restoration is now complete.

How to restore the computer with one click How to enable system restore in win7

When there are problems with the one-click recovery system, most of them are driver problems, which can generally be solved by reinstalling the driver. If it still cannot be solved, it can be solved by reinstalling the system.

You can follow the steps below to install the system disk:

1. Put the system CD into the CD-ROM drive.

2. Turn on the power, and then observe the screen prompts. Press "F2 to set up the BIOS before starting the system.

3.Set the startup mode. This setting screen is the BIOS settings. Find the boot option, there is First Boot, expressed in English, usually 1st Boot Device (first boot device), there is an option at the back, move the cursor to it, press the Enter key to enter and select the one with the words DVD or CD For that item, press Enter to confirm. Some of the key methods for moving the cursor are the keyboard's direction keys, and some are F5 and F6. This is a hint on the screen. Then press F10, select yes, press Enter to confirm, and then the computer will automatically restart.

4. At this time, boot from the CD, enter the installation system interface, and follow the system prompts step by step. The installation process will restart multiple times.

How to restore win7 with one click

The first one: the one-click restore that comes with win7: Before using the restore function that comes with the win7 system, first confirm whether this function is turned on in Windows 7. Right-click the blank space of the "Computer" page of the Explorer (that is, "My Computer" in Windows XP), select "Properties", and then click "System Protection" on the left side of the interface in the "System" view window link, and finally make sure that the drive to be protected is turned on in the "System Protection" option page.

When the protection function is turned on for a certain partition, Windows 7 will automatically create a restore point when necessary. Of course, we can also manually create a restore point at this time. The method is to click the "Create" button at the bottom in the interface above, fill in the name of the restore point, and wait a moment to complete the creation of the restore point.

When the system restore function is enabled, Windows 7 will create restore points for the corresponding partitions when necessary. So, how to restore the system when there is a problem with the system? Click the Start menu, click "All Programs" - "Accessories" - "System Tools" - "System Restore" to open the main system restore interface and follow the wizard.

When using System Restore in Windows XP, we see a calendar view in which we can select restore points, but these have changed a lot in Windows 7. First of all, the system restore function of Windows 7 will select the restore point recommended by the system by default, and tell you the creation time and description of the restore point, so that you can have an understanding of the system's recommendations. Of course, we can also "select another restore point" and choose which state we need to restore to

After we set up the restore point of our choice, Windows 7 will display the available restore points in the list. The time, description, and type are all clear, and the restore points we previously created manually are also listed.

The system restore of Windows 7 has a big improvement compared to the XP system, that is, it can scan the affected programs of each restore point. After we select a restore point, click the "Scan Affected Programs" button and wait a moment to get a detailed report, which includes programs and drivers that will be deleted and restored. This function has great benefits, making you more aware of the restore point selection. Especially when there are two restore points with similar time, you can use this function to select a restore point with a smaller impact for restoration.

After selecting the restore point, after a final confirmation step, the system restore function automatically completes the rest. Restore, restart, and complete. The process is the same as Windows XP. You will soon be able to see the system without problems again. System.

Second model: Qitu one-click restore: Qitu one-click restore is the first one-click restore software that achieves 3-second backup and 5-second restore. It can create 1,000 restore points and restore the system to different times. Paralyzed F11 one-click recovery, a stable, efficient and safe one-click recovery system software. Supported systems: Windows 2000, 2003, 2008, XP, Vista, Win7, currently only supports 32-bit.

(1) Qitu restores and downloads the latest version of the software with one click. After the download is completed, run the installation file and install it directly to the local computer. The Qitu one-click restore installation process is very simple, one-click operation, and does not require too many settings. After the installation is complete, we need to restart the computer to use it.

(2) After the restart is completed, we run Qitu One-Click Restore, open the software interface, select "Create Backup", and enter the restore point creation interface. We select the disk to be backed up, make notes, and click Create. In about 3 seconds, the restore point is successfully created. We can enter the advanced function interface and see the restore point we just created.

(3) When there is a problem with our system or we need to restore the computer, we run Qitu One-Click Restore and enter the "Restore Backup" of Qitu One-Click Restore. We can see all the restore points we created, select a restore point we need to restore, click Next, and see the remark information about the disk that our restore point will restore. After confirming OK, we click the "Restore" button, and the software will prompt you accordingly, so you can choose according to your needs. If system backup is not involved, it can be completed without restarting. If backup is involved, it will take effect after restarting the system. The above are simple operations. If you want to know more complex functions, such as power-on restore, automatic creation of restore points, etc., it is recommended that you go directly to their official website for detailed tutorials. If you encounter a very troublesome problem, you can directly ask the technical customer service and let him solve the problem for you.

Does win7 have one-click restore? The use of two one-click restore software has been analyzed above, which should solve your problem. If you haven’t used one-click restore yet, install it quickly.

The above is the detailed content of How to realize the one-click ghost function of quickly restoring the system in win7. For more information, please follow other related articles on the PHP Chinese website!