What should I do if my iPad has no sound? There are many reasons and solutions for the lack of sound on my Apple tablet!

When you use your iPad to watch videos or watch TV series, you suddenly find that there is no sound. This may be due to the following reasons: 1. Volume settings: First, make sure your iPad’s volume settings are not set to silent mode. You can adjust the volume through the side volume buttons or the control center. 2. Mute switch: Check if there is a mute switch on your iPad. Some iPad models have a physical switch to control the silent mode. Make sure the switch is not turned on. 3. Headphone connection: If you are using headphones to watch videos, check if the headphones are well connected. Sometimes the headphone plug is not plugged in properly, resulting in no sound. If you can't hear the other person's voice during a video call or phone call on your iPad, it could be due to one of the following: 1. Volume settings: Likewise, check to see if your iPad’s volume settings are set to the lowest or silent mode. 2. Microphone problem: If you can't hear the other party's voice, there may be a problem with your microphone. You can try using other apps or perform a recording test to check if the microphone is working properly. 3. Call settings: Make sure your call settings are not set to silent mode. You can find the settings button on the call interface to check whether the call settings are correct. If none of the above methods solve the problem, it is recommended to try restarting the iPad or updating the system software. You may also consider contacting Apple customer service or going to an authorized repair center for further troubleshooting and repair.

There are many reasons why the iPad has no sound, such as excessive temperature, system stuck, headphone connection interruption, etc. For different reasons, the solutions are also different.

Summarizes various reasons and solutions for the sudden loss of sound on iPad. iPad users can save them for emergencies!

1. Check the audio source

When we encounter the problem of no sound from the iPad, we first need to determine whether it is the iPad itself that has no sound, or whether there is no sound from the inserted headphones or the connected Bluetooth headset. Next, we can follow the steps below to check and solve the problem: 1. Check the iPad’s volume settings: Make sure the volume is not turned to minimum or silent mode. You can adjust the volume by pressing the volume up and down buttons and see if the volume icon appears on the screen. 2. Unplug the headphones: If the headphones are plugged in, try unplugging the headphones and check if there is sound from the iPad. Sometimes headphones may cause the iPad to become silent. 3. Check the Bluetooth connection: If a Bluetooth headset or other Bluetooth device is connected, make sure the connection is normal. You can try turning Bluetooth off and on again, or disconnecting from the Bluetooth device. 4. Check the mute switch and side switch: On the side of the iPad or in the Control Center, check whether the mute switch and side switch are turned on. Make sure they are turned off. 5. Restart iPad: Sometimes restarting the device can solve some temporary problems. You can try restarting the iPad and check if there is sound. 6. Software updates: Make sure your iPad’s software is the latest version. You can go to Settings - General - Software Update to check if there are available updates. If none of the above steps solve the problem, you may need to further check the hardware or contact Apple customer service for more help and support.

If the headphones are connected, you can plug and unplug the headphones, or shut down and restart the headphones.

If you find that there is no sound from your headphones or other external device, but there is no sound from your iPad itself, please continue reading below.

2. Check the system sound

If your iPad has no sound, please check whether the volume was accidentally adjusted to silent mode. If it is not adjusted to silent mode, you can try the following solutions:

Check whether the system volume is normal by long pressing the volume key. This operation is very simple, just press and hold the volume key, and then observe whether the system volume changes accordingly. If the system volume is adjusted normally, it means everything is normal; if the system volume does not change, then you need to further check whether there are other problems that prevent the volume from being adjusted normally. This method is suitable for most mobile phone models and can help us quickly detect whether the system volume is normal.

Please check whether the iPad’s system settings have enabled silent mode.

Please open the iPad's [Settings] and check whether the sound and notification settings are functioning properly.

3. Check if the iPad is overheated/cold

When the iPad is overheated or cold, or is in an extreme environment, some abnormalities may occur, including no sound. . You can operate as follows:

1. If the iPad device becomes hot, stop charging, do not use it anymore, and let it cool down in a ventilated place for more than 30 minutes;

2. If the iPad is overheated or too cold environment, do not use the iPad at this time, wait until a suitable environment to see if it returns to normal.

4. Shut down and restart

If your iPad suddenly has no sound, it is probably caused by some minor system problems. Don’t worry, we can try some simple methods to resolve these basic system glitches and restore iPad sound. First, you can try shutting down and restarting. Press and hold the iPad's power button, then slide the "Slide to power off" option, wait a few seconds, and then press and hold the power button to turn it on. If shutting down and restarting does not solve the problem, you can try a force restart. Press and hold the iPad's Power and Home buttons until the Apple logo appears, then release the buttons. If none of the above methods restore the iPad's sound, you can check the iPad's volume settings. Slide the control center at the bottom of the screen to make sure the volume rocker is not turned off or turned down. If there is still no sound, you can try unplugging your headphones or external audio device. Sometimes plugging and unplugging headphones or audio devices can reactivate the iPad's sound. Finally, if the problem persists, you may consider updating your iPad’s system software. Go to Settings > General > Software Update to check if an update is available. I hope the above methods can help you solve the problem of no sound on iPad. If the problem persists, you may need to contact Apple customer service or professional technicians for further assistance.

Select different forced restart operations for different iPad models:

Full-screen models (iPad8 and later): Quickly press the volume up and down keys respectively, and then continue to press the power key until See the Apple logo;

iPad 7, iPad 7 Plus, etc.: Press and hold the top (or side) button and the Volume Down button simultaneously until you see the Apple logo;

For iPad7 and earlier models, we can restart by holding down the Home button and the power button. To do this, hold down both keys at the same time until the Apple logo appears on the screen. This can solve common problems such as system lags or application crashes. After rebooting, the device will restart and resume normal operation. Remember, make sure your device has important data saved before doing this.

5. iPadOS system repair

When the iPad has a problem that the sound cannot play normally, in addition to force restarting, you can also try to perform system repair operations. This may be due to a system glitch, which can be resolved by repairing the system.

We recommend a software called "Apple Phone Repair Tool", which can solve 150 iOS device system problems. These problems include, but are not limited to, black screen and inability to boot, repeated reboots, stuck in recovery mode, failed updates, etc. You don’t have to worry about erasing the data on your device when using this tool for standard repairs.

6. Restore factory settings

To solve possible system problems on the iPad, in addition to system repair, you can also directly restore the iPad to factory settings. Doing this can solve some possible system failures or settings problems that cannot be found, such as the situation that causes the iPad to have no sound. Factory reset will erase all personal data and settings, so be sure to back up important data before proceeding. The specific steps are as follows: 1. Open the iPad’s Settings app. 2. Click on the “General” option. 3. In the General options, scroll down and find the Reset option. 4. Click on the "Reset" option and then select "Erase All Content and Settings." 5. Enter the iPad unlock password and confirm to restore factory settings. 6. The iPad will begin the process of restoring factory settings, which may take some time, please be patient. 7. When the factory reset is completed, the iPad will restart and display the welcome interface. 8. You can then follow the prompts to set up, including selecting language, connecting to Wi-Fi, logging in to Apple ID, etc. Please note that a factory reset will erase all data, including apps, photos, music, etc. Therefore, please back up important data before operating. In addition, after factory reset, you will need to re-download and install previous apps and content.

Restore iPad factory settings means restoring it to its original state, but be aware that this will completely erase all data on the device. Therefore, before doing this, be sure to back up important data on your device in advance.

Just click on the iPad [Settings]-[General]-[Transfer or Restore iPad]-[Erase All Content and Settings]. Note that you choose to click [Erase All Content and Settings] instead of 【reduction】.

7. Hardware damage

The speaker of the iPad is damaged due to falling, soaking in water, dust, etc. At this time, it is recommended to go to Apple for official maintenance to check the problem.

If there is a non-human hardware problem within the warranty period, Apple officials may directly replace the iPad with a new one.

If your iPad has no sound when watching TV series, watching videos or listening to songs, you may wish to try the solutions summarized below. These methods may help you solve the problem: 1. Check the volume settings: Make sure the iPad's volume is adjusted to the appropriate level. You can adjust the volume by pressing the volume buttons or in Control Center. 2. Check the mute switch: Make sure the iPad’s mute switch is not turned on. If the mute switch is on, no sound will be heard. 3. Check the headphone connection: If you are using headphones, make sure they are properly connected to the iPad. Sometimes, if the headphones are not fully inserted, sound may not be transmitted to the headphones. 4. Restart iPad: Sometimes, restarting the device can solve some temporary problems. Try holding down the power button, sliding the slider to turn off, and then holding down the power button to turn it back on. 5. Check the application settings: If only a specific application has no sound, it may be a problem with the application's settings. Please go into the app's settings and check that the audio settings are correct. 6. Update software: Make sure the operating system and apps on your iPad are up to date. Sometimes, updating software can fix known issues. If none of the above methods solve the problem, you can try to restore the iPad to factory settings, or contact Apple customer service for further assistance. Hope these solutions can help you restore your iPad's sound!

The above is the detailed content of What should I do if my iPad has no sound? There are many reasons and solutions for the lack of sound on my Apple tablet!. For more information, please follow other related articles on the PHP Chinese website!