2 ways to solve the problem of Apple 13 having a white screen and not being able to boot normally!

iPhone13 has an inexplicable restart problem. The phone is stuck on the white Apple interface and cannot enter the system. When it is turned on, it always stays on the startup screen and cannot start normally.

The iPhone13 has the above problems, although they are all It is in the state of Apple logo and can be called white apple.

When Apple 13 has white screen, black screen, white apple and other faults, how should we force restart the device? Even after force restarting the device, the problem of mobile phone failure still cannot be solved. What should I do in this case?

The white screen problem on iPhone 13 may be caused by accidental pressing, squeezing, freezing, or iOS system issues. These are the three common reasons

One of the reasons for the white screen is upgrading or jailbreaking

Cause 2: Continuous clicking on the screen, quick operations, etc. cause the device to freeze and appear with a white screen

The third reason is that the white screen hardware failure occurs due to squeezing the screen, falling, etc.

For the white screen problem on the iPhone, in addition to possible hardware failures, we can try long pressing first Power button to solve. If this doesn't solve the problem, you can consider the following two solutions!

Method 1: Use professional tools to repair

If the device has a white screen due to upgrading, jailbreaking, etc., or the device is stuck and cannot be operated, the problem can generally be solved through iOS system repair.

You can use third-party tools to repair the iOS system, such as the Apple phone repair tool, which supports solving 150 types of iOS system problems, such as the device being stuck on the Apple icon, unable to open the screen, stuck in recovery mode, infinite loop, etc. . In addition, data will not be lost when repairing the device in standard mode

Operation Guide:

Step 1: After downloading and installing the repair tool, use a data cable to connect the device to the computer. Then click "iOS System Repair" and select "Standard Repair" mode

Note: Due to insufficient memory, White Apple needs to choose to put the iPhone into DFU mode. Follow the prompts to put iPhone13 into recovery mode or DFU mode.

Step 2: Wait for the software to recognize the device, then click "Download Firmware". After the download is successful, start the repair. The entire update process takes about 10 minutes. Please be careful not to disconnect the data cable and wait until "Repair Completed" is displayed.

Step 3: The system is repaired successfully. "Standard repair" is performed by default and no device data will be lost. If the device is still in a white apple state after standard repair, you can consider the "deep repair" mode, but this mode will cause the iPhone data to be cleared, so you need to back up the data in advance before repair

Method 2: iTunes "Restore" iPhone

Before using the "Restore" function of iTunes, you need to make sure to back up your data in advance, because this operation will clear all data on the device

Connect iPhone13 to the computer, Then manually put the iPhone into recovery mode, then click the "Restore" button in the iTunes pop-up window, and follow the prompts

Wait for iTunes to download the firmware, and the recovery will automatically start after the firmware download is completed. Process

If your iPhone 13 has a white screen, infinite restarts and cannot boot normally, you can try the following two solutions!

The above is the detailed content of 2 ways to solve the problem of Apple 13 having a white screen and not being able to boot normally!. For more information, please follow other related articles on the PHP Chinese website!