Home > Article > Mobile Tutorial > Detailed explanation of the reasons and solutions for iPhone 13 not charging!
When the iPhone 13 cannot be charged, the first reaction is, is the battery health insufficient? Battery damaged?
uncertain! Today, the editor will give a comprehensive and detailed introduction to the reasons and solutions for iPhone 13 not charging! Fruit fans remember to collect it!
The phone cannot be charged. I believe most people’s first reaction is that the battery is broken? Don't rush to spend money to repair and replace the battery.
In addition to battery damage, there may be many reasons:
1. Mainboard leakage: The mainboard has leakage, which is characterized by slow charging and fast power consumption on a daily basis. There may also be leakage during charging. Electric shock situation.
2. There is foreign matter or failure in the charging port: Check whether there are paper scraps, dust, etc. in the charging port that may affect the charging of the iPhone, or the charging port may be damaged or loose, resulting in the inability to charge normally.
3. The charger or data cable is damaged: Many people like to charge their iPhone at the same time, which will not only cause damage to the battery, but may also cause damage to the charging equipment. For example, the internal circuit is burned out, damaged, broken, etc.
4. Failure to use the original charger or data cable: Many third-party accessories are not certified by Apple. Using them may cause the iPhone to be unable to charge, and may cause "Accessories are not supported or certified" warning
5. Insufficient power supply: If the power supply power is not up to standard, or the computer USB port is used to charge, the power is insufficient. As a result, the iPhone cannot be charged.
When the computer is sleeping or in standby mode, when the iPhone is connected to the USB port on the keyboard, the iPhone battery may be drained, showing a black screen and unable to charge.
6. The temperature is too high or too low: When the temperature is too high or too low, charging may not be possible.
Some Apple fans have encountered problems when they cannot stop charging after charging reaches 80%. It is also possible that the heat generated during charging causes the temperature to be too high and cannot continue to charge.
7. iPhone is overcharged Power consumption: After the iPhone experiences excessive power consumption, the charging icon may not appear when charging.
8. Charging failure: Due to system upgrades, unexpected operations, etc., the charging management software fails, resulting in the inability to charge.
By understanding the reasons why the iPhone may not charge, we can find the best solution
Hardware faults include battery damage, motherboard leakage and charging port damage, which are all possible problems for the iPhone question. It is recommended that you go to Apple’s official after-sales center for repair
Software system failure: System software problems caused by upgrades, incorrect operations, etc. can be repaired using third-party tools.
Third-party reasons: The iPhone cannot be charged due to problems such as chargers, data cables, insufficient power supply (computer charging), etc., which are summarized as third-party reasons.
Please follow the following inspection points to rule out the possibility of third-party causes:
1. Check whether there is any abnormality in the charging port and check the original charger Check whether the device and data cable are damaged and perform a combined test.
2. Under suitable temperature conditions, charge the iPhone at home or other normal power charging port for more than half an hour. Check the charging status and whether it can be turned on and off normally.
If you cannot charge through the above operations, you can try to replace the charger and data cable, and then charge for more than half an hour to see if it can charge normally
Exclude hardware problems and third-party reasons. If the iPhone cannot be charged due to system software reasons alone, you can use third-party tools to fix it.
As an Apple mobile phone repair tool, it can solve 150 types of iOS device system problems while retaining data, such as black screen, constant restarts, stuck in recovery mode, failed updates, etc. The operation is simple, even a novice can easily get started
The repair success rate in "Standard Repair" mode is 80%, and no data will be lost. If "Standard Repair" fails, please use "Deep Repair" mode, which has a higher success rate, but will cause data loss, so you need to back up your data in advance before repairing!
Use the following steps to operate:
Step one: Download and open the Apple phone repair tool, and connect the Apple device to the computer through a data cable. Click "iOS System Repair", select according to the device, and then select "Standard Repair".
Step 3: After the software recognizes the device, click "Download Firmware". Be careful not to disconnect the data cable during the operation. The whole process will take about 10 minutes. Wait for the message "Repair" to appear. Done".
Please note that if one repair is unsuccessful, you can try multiple repairs. If it still fails, you can choose to perform a "deep repair", although the success rate is 99%, you may lose some data!
If your iPhone13 or other iPhone models cannot be charged, please first check the cause of the problem according to the above method, and then choose the corresponding solution to solve the problem. Bar!
The above is the detailed content of Detailed explanation of the reasons and solutions for iPhone 13 not charging!. For more information, please follow other related articles on the PHP Chinese website!