Home > Article > Mobile Tutorial > How to solve the white apple problem when restoring iPhone 12 to its original factory?
When you try to restore iPhone 12 to its original factory settings, you may encounter the problem that the progress bar stops and a white Apple icon appears. This phenomenon is called the white apple phenomenon, which means your iPhone may have crashed and become bricked. Don’t worry, this situation is not uncommon, you can try to repair the iOS system to solve problems such as stuck, white apple, recovery mode, etc. Below is a system repair tutorial to solve the white apple phenomenon. I hope it will be helpful to you.
First, we need to download and install the Apple phone repair tool. This tool can help us solve some problems that may occur during the upgrade process of Apple devices, such as white apples, black screens, constant restarts, stuck in recovery mode, failed updates, inability to boot, and other 150 iOS system problems.
First, we need to use a data cable to connect the device to the computer. Once the connection is successful, the software will automatically recognize the computer. Next, we need to click on the “Start” button and select the “Standard Repair” option. With that, we can begin the repair work.
According to the prompts, we can enter recovery mode or DFU mode by following the following steps: 1. First, make sure your device is turned off. 2. Connect the device to the computer using a USB cable. 3. Press and hold the device's power button and volume down button at the same time until the Apple logo appears on the device. 4. Release the power button, but continue to hold the volume down button. 5. If you enter recovery mode, you will see the iTunes icon and data cable prompt on the screen. 6. If you enter DFU mode, the screen will remain dark, but iTunes will pop up a window stating that the device has entered recovery mode. Note that entering DFU mode may require more steps, depending on the model of device you have. If you encounter any problems, it is recommended to refer to the official instructions of the device or contact relevant technical support.
Once the device identification software is launched, it will immediately start downloading the firmware.
#After the firmware download is completed, just click the "Start Repair" button to start the upgrade. After the upgrade is completed, the iPhone will automatically restart the device.
The upgrade process takes about 10 minutes. Please keep the data cable connected during the operation and wait patiently for the screen to display "Repair Complete" to confirm that the upgrade has been completed.
#Warm reminder: If you encounter a device failure or software problem, we have two repair modes for you to choose from. The first is the "Standard Repair" mode, which has a success rate of 80% and no data will be lost. If this repair mode doesn't resolve the issue, try using "Deep Repair" mode. Although the success rate is as high as 99%, it will cause data loss, so be sure to back up your data in advance!
The above is the detailed content of How to solve the white apple problem when restoring iPhone 12 to its original factory?. For more information, please follow other related articles on the PHP Chinese website!