The difference between legacy and uefi: 1. Supported system bits; 2. Running process time; 3. Corresponding disk partition; 4. Boot method; 5. Startup file; 6. Startup speed. Detailed introduction: 1. Supported system digits. Legacy is a traditional computer boot mode. It can boot 32-bit operating systems and 64-bit operating systems. However, UEFI cannot boot 32-bit operating systems and can only support 64-bit operating systems. bit operating system; 2. Running process time. The Legacy running process is more complicated, starting the computer and so on.
Legacy is an English word, meaning "legacy, legacy", and also refers to "legacy, old" objects or systems. In the computer field, legacy is usually used to describe data generated by outdated software or hardware, which is difficult to update or has aged. In different fields such as business, family, and politics, legacy is used to describe the value, influence, and wealth of a person or organization that are left to future generations.
UEFI, full name Unified Extensible Firmware Interface, Chinese name is Unified Extensible Firmware Interface, is a new generation of firmware interface standard. It is developed from the traditional BIOS (Basic Input/Output System) standard and has better startup and system management functions.
The main purpose of UEFI is to provide better startup and system management functions. It can initialize hardware devices, detect system configuration, load operating system and applications, etc. when the computer starts. Compared with traditional BIOS, UEFI has more functions and advantages, such as supporting larger hard disk capacity, faster startup speed, more security functions, better graphical interface, etc.
Legacy and UEFI are two different system boot modes, and there are some significant differences between them.
1. Supported system digits: Legacy is a traditional computer boot mode. It can boot a 32-bit operating system or a 64-bit operating system; UEFI cannot boot. 32-bit operating systems can only support 64-bit operating systems.
2. Running process time: Legacy running process is relatively complicated. Turn on the computer, then go through BIOS initialization, then go through BIOS self-test, then boot the operating system, and finally enter the system; The running process of UEFI is to turn on the computer, then initialize UEFI, go directly to the boot repair system, and finally enter the system.
3. Corresponding disk partition: Legacy corresponds to MBR partition, and UEFI corresponds to GPT partition. UEFI and Legacy refer to the system boot method, and MBR and GPT represent the disk partition table type.
4. Boot method: Legacy is the traditional BIOS boot method, while UEFI is the new BIOS boot method.
5. Startup file: The file name for Legacy booting Windows system is winload.exe, while the file name for UEFI booting Windows system is winload.efi.
6. Startup speed: Since UEFI can read 1MB at a time and load faster, UEFI's startup speed is usually faster than Legacy.
To sum up, there are significant differences between Legacy and UEFI in many aspects. Which boot method to choose depends on the computer's hardware configuration and requirements.
The above is the detailed content of What is the difference between legacy and uefi?. For more information, please follow other related articles on the PHP Chinese website!

legacy启动是指从BIOS之前的启动方式,是传统BIOS启动模式,和MBR分区模式相互依存,可以进行MBR分区系统的安装,支持所有Win系统的安装,兼容性较强;但是MBR分区无法支持超过2T的硬盘,并且效率低下。uefi启动是指从BIOS之后的启动方式,是全新启动模式,支持GPT分区结构,也必须是GPT分区表格式才能启动;它可加快启动速度,提高开机后操作系统的启动速度。

一些比较老的主板不支持uefi启动,不过win11的系统自动更新升级就是需要uefi启动的,因此大家就无法在系统更新中直接升级win11。但是这不代表我们真的无法安装win11,还是可以使用pe系统来安装的,下面就一起来看一下吧。主板不支持uefi怎么装win111、主板不支持uefi的话,可以使用pe系统来安装,因为pe系统安装能够无视几乎所有的安装条件。2、首先大家需要先下载一个win11的镜像系统文件。3、然后再下载一个优启通软件,帮助我们快速进入pe系统。4、准备工作完成后,打开优启通,

新买的电脑想要通过u盘启动来装系统,但是一些用户却遇到难题了,以为制作好u盘启动盘就能直接开机启动了。殊不知,很多新电脑都是预装的win10电脑不识别u盘启动盘,原因是预装win10系统支持的事UEFI启动模式,开启了SecureBoot安全启动,而我们想要通过u盘启动则需要关闭安全启动模式,下面快启动小编来为大家详细介绍一下哦。需要注意的是:一般情况下,安装了win7的电脑采用的是在Legacy+MBR模式,而预装了win8、win10一般都是采用UEFI+GPT模式,但是如果想要将win8、

LINUX作为一种开源操作系统,受到了越来越多用户的青睐,CentOS作为其一个重要的分支之一,以其稳定性和安全性备受赞誉,而UEFI(统一的可扩展固件接口)作为替代传统BIOS的新一代固件接口,也逐渐成为新款电脑的标配,本文将详细介绍如何在UEFI模式下安装CentOS6.7,并给出一些注意事项。UEFI模式下安装CentOS6.7的步骤准备工作在开始安装之前,确保你已经做好了以下准备工作:1.下载CentOS6.7的ISO镜像文件,并将其写入USB或光盘。2.确保你的计算机支持UEFI模式,

随着win10系统的不断更新,其原版安装镜像也越来越大,给喜欢使用U盘进行UEFI启动方式安装的同学带来了困扰,大家都知道,使用EFI方式安装系统,直接将微软原版镜像解压缩后,复制到fat32或fat16格式的U盘根目录,然后直接设置主板U盘启动就可以安装了,但是最近有很多小伙伴反映事与愿违,U盘使用fat格式有个限制,那就是单个文件最大不能超过4G,不然就会出现无法写入的情况,但是随着win10镜像的增大,其安装包里的install.wim文件也越来越大,已经超过了4G,这就导致了无法直接使用

现在新型电脑都是采用uefi gpt启动模式,以适应win8、win10这些新型操作系统,不过win7之前的系统大多不支持uefi,而是采用legacy启动模式,硬盘分区表是mbr,而不是gpt。

本站6月21日消息,PhoenixSecureCoreUEFI固件被曝安全漏洞,影响数百款英特尔CPU设备,联想目前已经发布了新的固件更新修复该漏洞。本站从报道中获悉,该漏洞追踪编号为CVE-2024-0762,被称为“UEFICANHAZBUFFEROVERFLOW”,存在于PhoenixUEFI固件中的可信平台模块(TPM)配置中,是一个缓冲区溢出漏洞,可被利用在易受攻击的设备上执行任意代码。该漏洞由Eclypsium发现,他们在联想ThinkPadX1Carbon第7代和X1Yoga第4代

在当今的计算机技术中,UEFI(UnifiedExtensibleFirmwareInterface,统一可扩展固件接口)已成为新的标准,它为操作系统和固件之间提供了一个桥梁,在Debian及其衍生版本中,由于历史和稳定性原因,UEFI的安装过程可能会有些复杂,本文将详细介绍如何在Debian上安装UEFI,从准备工作到最后的安装步骤,以及可能遇到的问题和解决方案。准备工作在开始之前,你需要确保你的系统满足以下条件:1.64位(x86_64)的Debian版本。2.至少有2GB的RAM。3.至少

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

SublimeText3 Chinese version
Chinese version, very easy to use

SublimeText3 Mac version
God-level code editing software (SublimeText3)

MantisBT
Mantis is an easy-to-deploy web-based defect tracking tool designed to aid in product defect tracking. It requires PHP, MySQL and a web server. Check out our demo and hosting services.

Dreamweaver CS6
Visual web development tools

DVWA
Damn Vulnerable Web App (DVWA) is a PHP/MySQL web application that is very vulnerable. Its main goals are to be an aid for security professionals to test their skills and tools in a legal environment, to help web developers better understand the process of securing web applications, and to help teachers/students teach/learn in a classroom environment Web application security. The goal of DVWA is to practice some of the most common web vulnerabilities through a simple and straightforward interface, with varying degrees of difficulty. Please note that this software
