What is the normal range of packet loss rate?

The normal range of packet loss rate depends on the type of network and application requirements. In different cases, they are: 1. In wired LAN, the normal packet loss rate should be between 0% and 0.1%. ; 2. In wireless LAN, the normal packet loss rate range is between 0.1% and 1%; 3. In WAN, the normal packet loss rate range is between 0.1% and 2%. Packet loss rate refers to the proportion of data packets lost during data transmission. In computer networks, packet loss rate is an important performance indicator, which reflects the stability and reliability of the network.

The operating system for this tutorial: Windows 10 system, DELL G3 computer.

Packet loss rate refers to the proportion of data packets lost during data transmission. In computer networks, packet loss rate is an important performance indicator, which reflects the stability and reliability of the network. The normal range of packet loss rates depends on factors such as the type of network, topology, load, and service requirements. Some common network types and corresponding packet loss rate ranges are introduced below.

1. Wired Local Area Network (LAN): In a wired LAN, the packet loss rate is usually very low, close to zero. The normal packet loss rate should be between 0% and 0.1%. This is because the transmission medium of wired LAN is usually reliable and the network equipment has high performance and bandwidth.

2. Wireless LAN (WLAN): In wireless LAN, due to factors such as interference, attenuation and multipath propagation of wireless signals, the packet loss rate is usually higher than that of wired LAN. The normal packet loss rate range is between 0.1% and 1%. Of course, this range is also affected by factors such as wireless signal quality, distance, interference sources, and network load.

3. Wide Area Network (WAN): In WAN, the packet loss rate is usually higher than that of LAN because WAN involves longer transmission distance and more network devices. The normal packet loss rate range is between 0.1% and 2%. However, for applications that require high reliability and low latency, such as real-time audio and video transmission or online games, the packet loss rate should be as low as possible, usually no more than 0.1%.

It should be noted that the packet loss rate is a dynamic indicator and will be affected by factors such as network load, topology, device performance, and network congestion. In situations of high network load or network congestion, the packet loss rate may increase. Therefore, the actual situation of the network and the requirements of the specific application should be taken into consideration when evaluating the packet loss rate.

For some special application scenarios, such as real-time audio and video calls, online games or financial transactions, which require high latency and reliability, the packet loss rate should be as low as possible, usually within 0.1%. The following are even lower. For some applications with lower non-real-time requirements, such as file transfer or email, a packet loss rate of less than 1% may still be acceptable.

In practical applications, network administrators and operators usually monitor and manage the packet loss rate of the network to ensure the normal operation and performance of the network. If the packet loss rate is outside the normal range, network troubleshooting and performance optimization may be required.

To summarize, the normal range of packet loss rate depends on the type of network and application requirements. In wired LANs, the normal packet loss rate should be between 0% and 0.1%; in wireless LANs, the normal packet loss rate range is between 0.1% and 1%; in WANs, the normal packet loss rate range Between 0.1% and 2%. However, specific applications may have more stringent requirements on packet loss rates. When evaluating the packet loss rate, the actual situation of the network and the needs of the specific application should be taken into consideration.

The above is the detailed content of What is the normal range of packet loss rate?. For more information, please follow other related articles on the PHP Chinese website!