The network cable connected to the router cannot access the Internet directly. You need to log in to the router for settings. The steps are: 1. Set the computer to automatic dialing, set the computer's network card to automatically obtain, and connect to the router with a network cable; 2. Log in to the router, open the computer's browser, and enter the router's default gateway address "192.168.1.1" , enter the password and log in; 3. Set the router WAN port, you need to set up PPPoE dial-up, enter the account number and password given to you by the operator, and click OK; 4. Set the wireless name, password, etc.
The operating system for this tutorial: Windows 10 system, 360 browser version 14.1.1.1081.0, DELL G3 computer.
The router does not allow you to access the Internet just by plugging in the Internet cable. You need to log in to the router to set it up. After the setting is completed, the computer that needs to access the Internet must use a network cable or a wireless router to connect, and use the router to access the Internet. Let's take a look at what we need to set up and what are the specific steps.
Setting steps:
1. Set the computer to automatic dialing
You need to set the computer's network card to automatically obtain it, and use a network cable to connect to the router .
#2. Log in to the router
Open the computer's browser (or use a mobile terminal to route via wireless connection, also use a browser) , enter the router's default gateway address "192.168.1.1" in the browser, enter the password and log in. Of course, this information can usually be found on the nameplate on the bottom of the router.
#3. Set up the router WAN port
Home broadband users need to set up PPPoE dial-up, and enter the account number given to you by the operator. Enter the password and click OK
Dedicated line users need to enter the public network address, subnet mask, default gateway, and DNS given to you by the operator into the static IP address While surfing the Internet, click OK
In this way, your router will be connected to the network.
4. Set wireless name and password
##5. Others
Default The LAN port gateway and DHCP have been set up. At this point, your setting process is over.The above is the detailed content of Can I connect the network cable to the router to access the Internet directly?. For more information, please follow other related articles on the PHP Chinese website!