In order to keep their Windows systems healthy, most users regularly update their Windows systems to the latest version. Additionally, they try to upgrade the system to the latest Windows version.
Many Windows users have started receiving error messages on their system screen while trying to launch File Explorer on their Windows system. . This happens not only when opening File Explorer, but also Recycle Bin, Task Manager, and other wizards. These wizards are essential components for using the system effectively.
The error message displayed in the window is as follows.
An attempt was made to reference a token that does not exist.
Now after receiving this error, users cannot open any wizard on their system such as Recycle Bin etc. This is actually a serious issue. According to the available reports and data about this issue, corrupted files may be the main cause of this error message.
Some users also claimed that they started noticing this error after upgrading their Windows systems. Therefore, you can also try to reset the Windows system to solve this problem.
After researching this topic, we gathered some information and came up with a series of solutions that will solve this problem in this article.
Fix 1 – Repair Corrupted DLL Files in System
Sometimes, some DLL files get corrupted due to obvious reasons, which results in such errors as discussed above in this article. So we can fix those corrupted DLL files using command prompt.
Please follow the steps below to repair corrupted DLL files in your system.
Step 1: Simultaneously press the Windows R keys on your keyboard to open the Run box.
Step 2: Then type cmd and press the Ctrl, Shift and Enter keys simultaneously to open enhance The Command Prompt application.
NOTE – You may have to accept the UAC prompt that will appear on the screen, click Yes to continue.
Step 3: After opening an elevated command prompt window, type cd %WINDIR%\System32 and press Enter.
Step 4: Next, you need to type the following lines in the command prompt window again and press Enter key.
for /f %s in ('dir /b *.dll') 执行 regsvr32 /s %s
Step 5: This will start detecting any corrupted DLL files in the system and try to repair those corrupted DLL files.
Step 6: Once completed, you can close the command prompt window and restart the system.
Fix 2 – Use the DISM tool to restore the health of the system
Some users claim that this error can be resolved by simply restoring the health of the system using the DISM tool. Therefore, we recommend that our users try restoring the health of their systems to see if this applies to them as well.
Here are the steps on how to perform a restore to health using the DISM tool below.
Step 1: Press the Win key and type cmd on the keyboard.
Step 2: Right-click the Command Prompt application in the search results, as shown in the screenshot below.
Step 3: Then selectRun as administrator from the context menu, as shown below.
Yes on any UAC prompted on the screen to continue.
Step 5: After the Command Prompt application opens as administrator, type the following command and pressEnter to execute.
DISM /在线 /Cleanup-Image /RestoreHealth
R key at the same time to open the RunCommand box.
Step 2: Enterms-settings:windowsupdate in the text box and press Enter.
Step 3: This will open the Windows Update page on the Settings app on your system.
Step 4: Click in the upper right corner of the Windows Update page to check for updates.
Step 5: When clicked, it will start checking for any updates available for your Windows system.
Step 6: If updates are available, download and installall updates.
Step 7: Once everything is downloaded and installed, the system will be updated.
Step 8: Now you can close the Windows Update page and make sure to restart the system.
Step 9: After the system starts, check whether the error still exists.
Fix 4 – Restore Windows to previous version
If this error occurs on your system due to the latest version released by Microsoft for Windows system, then you can always try to restore your Revert Windows to a previous version.
Steps to restore Windows to its previous version.
Step 1: Press the Windows key and type recovery options on your keyboard.
Step 2: Then click on Recovery Options in the search results to open the recovery page as shown in the image below.
Step 3: After the page named Recovery opens, click Restart now in Advanced startup, as shown in the figure below.
Step 4: This will reboot the system and you will see the Select an option page on the blue screen.
Step 5: Click on the Troubleshooting option to open the troubleshooting page.
Step 6: Then you need to select Advanced Options as shown below.
Step 7: In the advanced options, you have to select the Return to previous build option at the bottom .
Step 8: Thereafter follow all the on-screen instructions to complete the process of reverting to the previous version.
Step 9: Once completed, restart your system and see if that helps.
Fix 5 – Perform System File Checker
When you perform a System File Checker scan on any Windows system, it begins scanning the entire system to find any corrupted system files and repair them. Therefore, this ensures that there are no corrupted system files causing any errors in the system.
Follow the steps explained below to learn how to execute System File Checker using Command Prompt.
Step 1: Press the Windows R key simultaneously to open the "Run" command box.
Step 2: Type cmd in its text box and then press Ctrl Shift Enter key.
Step 3: This will prompt UAC on the screen and you need to click "Yes" to accept it to continue.
Step 4: This will open the command prompt as administrator.
Step 5: Now type sfc /scannow in the command prompt and press Enter key.
Step 6: When you execute this command, it will start scanning the entire system to find any corrupted system files and repair them.
Step 7: This may take a while, so wait until it's complete.
Step 8: Once completed, you can close the command prompt window and restart the system.
The above is the detailed content of Fix incorrect method trying to reference a non-existent token. For more information, please follow other related articles on the PHP Chinese website!

c盘的users是用户文件夹,主要存放用户的各项配置文件。users文件夹是windows系统的重要文件夹,不能随意删除;它保存了很多用户信息,一旦删除会造成数据丢失,严重的话会导致系统无法启动。

启动任务管理器的三个快捷键是:1、“Ctrl+Shift+Esc”,可直接打开任务管理器;2、“Ctrl+Alt+Delete”,会进入“安全选项”的锁定界面,选择“任务管理器”,即可以打开任务管理器;3、“Win+R”,会打开“运行”窗口,输入“taskmgr”命令,点击“确定”即可调出任务管理器。

PIN码是Windows系统为了方便用户本地登录而独立于window账户密码的快捷登录密码,是Windows系统新添加的一套本地密码策略;在用户登陆了Microsoft账户后就可以设置PIN来代替账户密码,不仅提高安全性,而且也可以让很多和账户相关的操作变得更加方便。PIN码只能通过本机登录,无法远程使用,所以不用担心PIN码被盗。

对于刚刚开始使用PHP的用户来说,如果在Windows操作系统中遇到了“php不是内部或外部命令”的问题,可能会感到困惑。这个错误通常是由于系统无法识别PHP的路径导致的。在本文中,我将为您提供一些可能会导致这个问题的原因和解决方法,以帮助您快速解决这个问题。

win10自带的onenote是UWP版本;onenote是一套用于自由形式的信息获取以及多用户协作工具,而UWP版本是“Universal Windows Platform”的简称,表示windows通用应用平台,不是为特定的终端设计的,而是针对使用windows系统的各种平台。

windows操作系统的特点包括:1、图形界面;直观高效的面向对象的图形用户界面,易学易用。2、多任务;允许用户同时运行多个应用程序,或在一个程序中同时做几件事情。3、即插即用。4、出色的多媒体功能。5、对内存的自动化管理。

因为win10系统是不自带扫雷游戏的,需要用户自行手动安装。安装步骤:1、点击打开“开始菜单”;2、在打开的菜单中,找到“Microsoft Store”应用商店,并点击进入;3、在应用商店主页的搜索框中,搜索“minesweeper”;4、在搜索结果中,点击选择需要下载的“扫雷”游戏;5、点击“获取”按钮,等待获取完毕后自动完成安装游戏即可。

在windows中鼠标指针呈四箭头时一般表示选中对象可以上、下、左、右移动。在Windows中鼠标指针首次用不同的指针来表示不同的状态,如系统忙、移动中、拖放中;在Windows中使用的鼠标指针文件还被称为“光标文件”或“动态光标文件”。

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

Notepad++7.3.1
Easy-to-use and free code editor

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.

EditPlus Chinese cracked version
Small size, syntax highlighting, does not support code prompt function

PhpStorm Mac version
The latest (2018.2.1) professional PHP integrated development tool

SublimeText3 Chinese version
Chinese version, very easy to use
