Printing something using your office printer is usually a routine task, but only if everything works properly. If any problem occurs, the page will not print and you will see this error message " The operation cannot be completed (error 0x000006ba). Please restart the spooler on the server or restart the server computer. " This The best solution to the problem is stated directly in the error message.
1. You should restart the system and then retry the printing operation.
2. If you are using an Office printer, make sure there are no other printing processes taking place. This may delay your work and show you error messages.
You must restart the Printer Spooler service.
1. You must open the service utility.
2. So enter "Service" in the search box.
3. Then, click "Service" to open the service utility page.
#4. After the service page opens, search down for the "Print Spooler" service.
5. After finding the service, right-click the service and click "Properties".
#5. When the properties appear, go to "Startup type:" and set it to "Automatic" from the drop-down list.
6. Next, look at the "Startup Status" reading. Check whether it is "Running" or "Stopped".
7. If the service is running, click "Stop". Then, wait for a few seconds and click "Start" to start the service.
If the service has stopped, click "Start" to start the service.
8. After stopping the service, click "Start".
9. Now, go to the “Recovery” tab.
10. Here, change “First failure: ”, “Second failure: ” and “ Subsequent failure: ” is set to “Restart Service”.
11. Finally, click "Apply" and "OK" to save the changes.
#After restarting the printer spooler service, return to the print page and try printing the document again.
You should quarantine the printer driver and retry the print operation.
1. Press the Windows key and R key at the same time.
2. Then, enter /copy-paste, and click "OK".
打印管理.msc
3. On the opened print management page, you can find all the printer tools in the left pane.
4. Now, on the left, select "All Drivers". Then, right-click on it and click "Refresh".
#5. You can find all printer drivers in the right pane.
6. After finding the driver, right-click the printer driver and click "Set Driver Isolation>".
7. Then, select "Quarantine" from the drop-down list.
This will move the print driver into a separate process.
Now, print the document again. Check if this works.
You can clean up the printer spool file, but before that you must stop the spool service.
2. To do this, press the Windows key from your keyboard and type " cmd ".
3.现在,只需右键点击“命令提示符”并点击“以管理员身份运行”。
4. 只需一个命令,您就可以停止后台处理程序服务。 粘贴 它并点击 Enter 按钮。
不要停止后台处理程序
最小化命令提示符终端页面。稍后您将需要它。
5.现在,同时按下Win键+E键。
6. 导航至此部分 –
C:\Windows\system32\spool\PRINTERS
7. 您可能会在屏幕上看到与权限相关的提示。单击“继续”按钮。
8. 进入文件夹后,一次选择所有文件和文件夹。
9. 然后,单击文件资源管理器上的“删除”图标。
之后,关闭文件资源管理器页面。
9. 再次返回终端。
10. 然后,写下这些词并按Enter 键。
净启动假脱机程序
这将恢复停止的后台处理程序服务。
一旦您看到“ Print Spooler 服务已成功启动。”消息已出现在终端上,您可以关闭它。
打印机疑难解答正是您需要的工具。
1. 您可以在设置页面找到打印机疑难解答。
2. 只需按下Win 键+I。
3. 设置页面打开后,单击左侧窗格中的“系统”。
4. 在右侧,点击“疑难解答”设置。
5.然后,点击“其他疑难解答”。
6. 这将打开一个广泛的疑难解答列表。看看你是否能找到“打印机”疑难解答。
7. 只需选择疑难解答并点击“运行”即可运行它。
8.当打印机故障排除程序启动时,只需勾选 “自动应用修复”选项。
9. 然后,点击“下一步”。
10. 下页列出了一些打印机。选择有问题的打印机。
11.然后您可以通过点击“下一步”继续。
12. 一旦 Windows 检测到问题并开出一些处方。
13. 因此,点击“应用此修复”以应用解决方案。
您的打印机问题应该得到解决。因此,请尝试使用计算机打印测试页。
如果所有解决方案都失败,请尝试卸载并重新安装打印机驱动器
1.同时按下Win键+I键。
2.然后,点击“设备管理器”进入。
3. 打开设备管理器后,点击“打印队列”部分。
3. 尝试查找有问题的打印机。然后,右键单击该设备并单击“卸载设备”。
[在这种情况下,我们的故障打印机是“ HP DJ 1110 系列”。]
4. Just click "Uninstall" to uninstall the driver.
After uninstalling the printer, you can close the Device Manager window.
Method-1
Close each window and restart the computer. When the system restarts, Windows detects the uninstalled printer driver and automatically reinstalls it.
Method-2
In case restarting the system does not succeed. Scanning your system for hardware changes may resolve the issue -
1. Press the Windows key #".
2. After opening the Device Manager page, click "Operation
" in the menu bar.3. Then click the "Scan for hardware changes
" option.
The printer should automatically reinstall itself.
After you complete this, check if this works for your printer. Test if this works.The above is the detailed content of How to solve the problem "The operation cannot be completed, error code 0x000006ba, restart the print spooler"?. For more information, please follow other related articles on the PHP Chinese website!