Fix: Device Manager keeps refreshing in Windows 11, 10

Many Windows users report that their Device Manager frequently refreshes after startup. Therefore, they cannot search for any device driver or perform any specified operations such as update, install, and uninstall.

There may be many reasons for such problems on Windows systems, including corrupted system files, firewall or third-party antivirus software installed on the system, failure of the connected USB device, certain error reporting services, etc. Waiting.

In this article, we have collected some details about the possible causes of the problem and put them into a collection of fixes that may help solve the problem on Windows 11 system.

Fix 1 – Locate the USB device responsible for the issue

This issue may be caused by a USB device. Try removing the USB devices connected to the system one by one to see which USB is causing the problem.

You can also download http://www.nirsoft.net/utils/usb_log_view.html from nirsoft and find out which USB device is causing the problem.

After downloading, unzip the zip and run the executable file if this issue occurs on your PC.

#A log will be displayed that allows you to easily identify the issue causing the USB.

Just double click on the item in the log and check the product name. This will help you identify the problem causing your USB device.

Disconnect the USB from your PC.

Fix 2 – Disable SSDP Discovery

1 – Search for Services in the Windows taskbar and click on it to open the Service Manager window.

2 - Find the SSDP Discovery Service from the list and double-click it.

3 – Now, click Stop to stop this service.

4 - You can also permanently disable it by selecting Startup type to disabled.

Fix 3 – Run SFC and DISM Restorehealth

System data files are very important for Windows to run efficiently and smoothly on the system. When these files get corrupted or corrupted, they can cause various problems in the system that are not easily known. Therefore, we recommend our users to perform a System File Checker scan on the system to detect corrupted files so that they can be replaced with new files from the internet.

Let's see how it is done using the SFC below.

Step 1: Press the Windows and R keys simultaneously on your keyboard to open the "Run" command frame.

Step 2: Then, enter cmd in the Run command box and hold down ctrl, shift and enter# at the same time ##key.

NOTE: Click is to continue the UAC prompt on the screen.

Step 3: This will open a

Command Prompt window as the system administrator.

Step 4: Later, type

sfc /scannow in the command prompt and press Enter key to execute it.

Step 5: This will start scanning the system for corrupt data files that may be causing this issue.

Step 6: Once the scanning operation completes successfully, it will display all the corrupted files, if any.

Step 7: Please try to replace them with updated files from the internet.

Step 8: Next, execute the commands given below using DISM tool to restore system health.

DISM /在线 /Cleanup-Image /RestoreHealth

Step 9: Once health recovery begins, wait for it to complete.

Step 10: After all commands have been executed, close the command prompt window.

Fix 4 – Disable Error Reporting Windows Services

Windows Services are programs built and designed to improve user experience and performance. This usually runs in the background and is loaded when the system starts.

Some windows services are nothing more than error reporting windows services, which may be the cause of system problems.

Here are a few steps that will show you how to disable certain services from the services window.

Step 1: Press the

Windows key and type Services.

Step 2: Select the

Service application from the results as shown below.

Step 3: In the Services window, search for the

Problem Report Control Panel Supported service by scrolling down the list of services, as shown below.

Step 4:

Double-click it to open its Properties window.

Step 5: Once the properties window opens, click on the "General" tab and select the "Startup Type" drop-down list Select "Disable".

Then, click Apply and OK to disable the service and close the Properties window.

Step 6: Similarly, double-click to open the Windows Error Reporting Service.

Step 7: By going under the "General" tab and selecting "Disabled" as Startup type to disable the service.

Step 8: Then, click Apply and OK to reflect the changes as shown in the screenshot below.

Step 9: After disabling all necessary services, close the service application and restart the system once.

After the system starts, check whether the problem is solved.

Fix 5 – Run a clean boot on a Windows system

During a normal system boot, all very necessary services are loaded and then the system is started. Here we are not sure which service loaded among many is causing this issue. Therefore, for careful diagnosis, we recommend users to perform a clean boot on their system using MSConfig tool and enable only some specific services and check if these are the cause.

Here are a few steps on how to accomplish this.

Step 1: Press the Windows key on your keyboard and enter ms config.

Step 2: Click on the System Configuration application from the search results as shown below.

Step 3: After opening the System Configuration application, go to the "Services" tab.

Step 4: In the "Services" tab, click the "Disable All" button at the bottom, as shown in the image below.

Step 5: Click the Hide all Microsoft services checkbox to select it, then click Apply and OK.

Step 6: After this, restart the system and check if the device manager is working properly.

Step 7: If this is working fine, then select the services one by one and clean boot the system to see if this service is actually causing the problem.

This way you can understand which service is the culprit.

Again, you can also use Task Manager to find the startup application causing this issue.

Step 1: Press and hold the CTRL, SHIFT, and ESC keys simultaneously to open the Task Manager window.

Step 2: Click on the Launch Application icon on the left panel as shown below.

Step 3: There will be a list of applications that launch on boot.

Step 4: Disable all the applications one by one by right-clicking on them and selecting the "Disable" option from the context menu as shown below.

Step 5: Then, reboot and check if the issue is resolved.

This means that some startup application is causing the issue.

Step 6: So, enable the applications one by one and then restart the system and check the application causing the problem.

Hope this resolves the issue.

The above is the detailed content of Fix: Device Manager keeps refreshing in Windows 11, 10. For more information, please follow other related articles on the PHP Chinese website!