The most core component in the computer hardware system is the "CPU". Computer hardware includes five major parts: arithmetic unit, controller, memory, input device, and output device. The arithmetic unit and controller are also called the central processing unit (CPU), which is the core component of the computer system.
The operating environment of this tutorial: Windows 7 system, Dell G3 computer.
The core component of the computer hardware system is the "CPU".
The central processing unit (CPU), as the computing and control core of the computer system, is the final execution unit for information processing and program execution. Since its creation, CPU has made great progress in logical structure, operating efficiency and function extension.
Central processing unit (CPU) is one of the main devices of an electronic computer and a core accessory in the computer. Its function is mainly to interpret computer instructions and process data in computer software. The CPU is the core component of the computer that reads instructions, decodes them, and executes them. The central processing unit mainly consists of two parts, namely the controller and the arithmetic unit, which also include cache memory and the data and control bus that realize the connection between them. The three core components of an electronic computer are the CPU, internal memory, and input/output devices. The main functions of the central processing unit are to process instructions, perform operations, control time, and process data.
In the computer architecture, the CPU is the core hardware unit that controls and allocates all hardware resources of the computer (such as memory, input and output units) and performs general operations. The CPU is the computing and control core of the computer. The operations of all software layers in the computer system will eventually be mapped to CPU operations through the instruction set.
Core part
Operator:
Operator refers to the component in the computer that performs various arithmetic and logical operations, among which the arithmetic logic unit It is part of the central processing core.
(1) Arithmetic logic unit (ALU). Arithmetic logic unit refers to a combinational logic circuit that can realize multiple sets of arithmetic operations and logical operations. It is an important part of central processing. The operations of the arithmetic logic unit are mainly two-bit arithmetic operations, such as addition, subtraction, and multiplication. During the operation process, the arithmetic logic unit mainly performs arithmetic and logical operations using computer instructions. Generally speaking, the ALU can play the role of direct read-in and read-out, which is specifically reflected in the processor controller, memory and input and output devices. , input and output are implemented based on the bus. The input command contains an instruction word, including operation code, format code, etc.
(2) Intermediate register (IR). Its length is 128 bits, and its actual length is determined by the operands. IR plays an important role in the "push and fetch" instruction. During the execution of this instruction, the content of ACC is sent to IR, then the operand is fetched to ACC, and then the content of IR is pushed onto the stack.
(3) Operation accumulator (ACC). Current registers are generally single accumulators with a length of 128 bits. For ACC, it can be regarded as a variable-length accumulator. In the process of describing instructions, the expression of ACC length is generally based on the value of ACS, and the ACS length is directly related to the ACC length. Doubling or halving the ACS length can also be regarded as doubling or halving the ACC length.
(4) Descriptor register (DR). It is mainly used to store and modify descriptors. The length of DR is 64 bits. In order to simplify data structure processing, the use of descriptors plays an important role.
(5)B register. It plays an important role in the modification of instructions. The length of the B register is 32 bits. It can save the address modification amount during the address modification process. The main memory address can only be modified with a descriptor. The descriptor points to the first element in the array, so accessing other elements in the array should require modifiers. For arrays, they are composed of data or elements of the same size and are stored continuously. The common access method is a vector descriptor, because the address in the vector descriptor is a byte address, so when proceeding During the conversion process, the base addresses should first be added. For the conversion work, it is mainly implemented automatically by the hardware. In this process, special attention must be paid to alignment to avoid exceeding the array boundaries.
Controller:
The controller refers to a master device that changes the wiring of the main circuit or control circuit in a predetermined sequence and changes the resistance value in the circuit to control the starting, speed regulation, braking and reverse direction of the motor. The controller is composed of program status register PSR, system status register SSR, program counter PC, instruction register, etc. As a "decision-making mechanism", its main task is to issue commands and play a coordination and command role in the operation of the entire computer system. There are two main categories of control: combinational logic controllers and microprogrammed controllers. Both parts have their own advantages and disadvantages. Among them, the combinational logic controller has a relatively complex structure, but its advantage is that it is faster; the microprogrammed controller has a simple structure, but when modifying a machine instruction function, the entire microprogram needs to be reprogrammed.
Related recommendations: "Programming Video"
The above is the detailed content of What is the core of a computer hardware system?. For more information, please follow other related articles on the PHP Chinese website!

把逻辑地址转换为内存物理地址的过程称作“重定位”。程序发出的逻辑地址并不是数据或指令的真实存放地,但可以对这个地址进行转换来获得真实存放地的物理地址,相当于重新定位一次。

根据计算机网络覆盖范围,可将计算机网络分为三类:1、局域网(LAN),是一种在小区域内使用的,由多台计算机组成的网络,覆盖范围通常局限在10千米范围之内;2、广域网(WAN),是一种远程网,涉及长距离的通信,覆盖范围可以是个国家或多个国家,甚至整个世界;3、城域网(MAN),其网络覆盖范围通常可以延伸到整个城市,借助通信光纤将多个局域网联通公用城市网络形成大型网络。

微机的字长是4个字节意味着:在CPU中整体传输和处理的二进制数为32位。因为一个字节是8位长(字长),所以4个字节就是32位了,也就是说cpu中能够同时处理32位的二进制数据。在计算机领域,字是用来表示一次性处理事务的固定长度;一个字的位数,即字长,是计算机一次可处理的二进制数字的数目。

微型计算机的性能主要取决于CPU(中央处理器)的性能。CPU是计算机系统的运算和控制核心,是对计算机的所有硬件资源(如存储器、输入输出单元) 进行控制调配、执行通用运算的核心硬件单元;中央处理器(CPU)的性能对计算机性能起决定性作用。

微型计算机的运算器控制器及内存储器的总称是“主机”。在微型计算机中,运算器、控制器、存储器三个部分是信息加工、处理的主要部件;运算器和控制器总称为CPU(中央处理单元),而CPU与内存储器又总称为主机,这是计算机系统中最核心的硬件部分。

MODEM的功能为“实现模拟信号与数字信号之间的相互转换”。MODEM的中文名为“调制解调器”,它可以在发送端通过调制将数字信号转换成通信线路上传输的模拟信号,在接收端通过解调再将模拟信号转换为数字信号。

世界上第一台计算机的电子元器件是“电子真空管”。世界上第一台计算机是“阿塔纳索夫-贝瑞计算机”,通常简称ABC计算机,采用电子真空管作为电子元件;该计算机电路系统中装有300个电子真空管执行数字计算与逻辑运算,机器使用电容器来进行数值存储,数据输入采用打孔读卡方法,还采用了二进位制。

计算机系统的内部总线主要可以分为5类:1、数据总线,在CPU与RAM之间来回传送需要处理或是需要储存的数据;2、地址总线,用来指定在RAM之中储存的数据的地址;3、控制总线,将微处理器控制单元的信号,传送到周边设备;4、扩展总线,是外部设备和计算机主机进行数据通信的总线,例如ISA总线,PCI总线;5、局部总线,取代更高速数据传输的扩展总线。

Hot AI Tools

Undresser.AI Undress
AI-powered app for creating realistic nude photos

AI Clothes Remover
Online AI tool for removing clothes from photos.

Undress AI Tool
Undress images for free

Clothoff.io
AI clothes remover

AI Hentai Generator
Generate AI Hentai for free.

Hot Article

Hot Tools

SAP NetWeaver Server Adapter for Eclipse
Integrate Eclipse with SAP NetWeaver application server.

EditPlus Chinese cracked version
Small size, syntax highlighting, does not support code prompt function

Dreamweaver Mac version
Visual web development tools

Notepad++7.3.1
Easy-to-use and free code editor

VSCode Windows 64-bit Download
A free and powerful IDE editor launched by Microsoft
