How to install win10 system in guid partition

#How to install win10 system on gpt partition?

With the development of hardware technology, new computer motherboards are in uefi mode by default. If you want to install the system under uefi, you need to format the hard disk into a gudi partition table, also called a gpt partition. The guid partition is suitable for installing the latest versions of operating systems such as win10 64-bit professional version. (Recommended learning: phpstorm)

The steps are as follows

1. After making the wepe boot disk, copy the win10 64-bit system iso image directly to the U disk. The micrope boot disk supports images larger than 4G;

2. Insert the micro-pe boot disk into the computer that needs to install win10. After restarting, keep pressing F12 or F11 or Esc and other startup shortcut keys to bring up the startup menu dialog box and select the recognized U disk option, usually The name of the U disk may be USB, such as SanDisk. If there is a U disk item with the word uefi, select the item with UEFI mode and press Enter to enter;

3. Select the windows pe resolution. The first one is selected by default. You can also select the second specified resolution and press Enter;

4. After entering pe, you need to install the win10 system under the gpt partition. The hard disk needs to be formatted into a GPT partition table. If the win10 model has been pre-installed before, go to step 7 directly;

If you need to repartition the whole disk, double-click [Partition Assistant (lossless)] on the desktop, select disk 1, and click [Quick Partition]. If you have multiple hard disks, be sure to select the right one and do not delete by mistake. ;

5. Set the number of partitions, partition size and partition type. The system disk with the volume label [System] is recommended to be 60G or above. Since UEFI boot is selected, the disk type must be Select GPT, [Partition alignment] is 4k alignment, 2048 sectors are enough, or 4096 sectors. After confirming that it is correct, click to start execution;

6. The partitioning process is very Quickly, after the partitioning is completed, as shown in the figure, the GPT partition will have two ESP and MSR without drive letters. To move these two partitions, just look at the C and D drives you separated. If the drive letters are changed Occupy, select the disk that already occupies the C drive, select [Change Drive Letter] on the left, and so on. It is okay not to change it. You can judge the location of the system disk according to the volume label [System];

7. Then open this computer—micro PE toolbox, right-click the win10 system iso image, and select [Load]. If it is not loaded, right-click—Open with—Explorer;

8. Double-click [Double-click to install system.exe], run the installation tool, select [Restore Partition], the GHO WIM ISO image path will be automatically extracted to win10.gho, and then select the installation location, generally It is the C drive, or it can be judged based on the volume label or total size. After selecting, click OK;

9. If this prompt pops up, ignore it, click Yes and continue;

10. This dialog box pops up, select restart after completion and boot repair, click Yes;

11. Go to this interface and perform the process of installing and deploying the win10 system to the C drive. You need to wait for a while;

12. After the operation is completed, the computer will automatically restart after 10 seconds;

13. Unplug the U disk during the restart process, and then enter this interface to perform win10 system component installation, driver installation and activation operations;

14. Reboot again to enter the system automatic configuration process, and you need to wait for a while;

15. Finally boot into the win10 system desktop, gpt The partition installation process of win10 is completed.

The above is the detailed content of How to install win10 system in guid partition. For more information, please follow other related articles on the PHP Chinese website!