Home  >  Article  >  Operation and Maintenance  >  Linux network is unreachable

Linux network is unreachable

angryTom
angryTomOriginal
2019-11-08 15:21:0113606browse

Linux network is unreachable

linux network is unreachable

linux configuration gateway prompts that the network is unreachable

route: SIOCADDRT: Network is unreachable

Reason: It is possible that when configuring the IP address, the subnet mask was not added

Solution: Reconfigure the IP, add the subnet mask, and add the gateway

Detailed operation process As follows:

1. Add a network card, configure ip

[root@vm50 ~]# nmcli connection show //查看网卡

Name UUID type device

eth0 4f5f8b5d-4b51-4e1c-98c7-40f0eb90f241 802-3-ethernet eth0
virbr0 566dccb2-cbb0-4bbe-a714-06f3d313d9cd bridge virbr0
[root@vm50 ~]# nmcli connection add con-name eth1 type ethernet ifname eth1   //添加网卡
连接“eth1”(4cb9f43e-77d6-455f-990c-620e4a12d52b) 已成功添加。

[root@vm50 ~]# nmcli connection modify eth1 ipv4.method manual  ipv4.addresses 192.168.2.50/24 con.autoconnect yes  // 配置ip地址,此处192.168.2.50/24(24未加,则网络不可达)
[root@vm50 ~]# nmcli connection up eth1    /激活网卡
连接已成功激活(D-Bus 活动路径:/org/freedesktop/NetworkManager/ActiveConnection/8)
[root@vm50 ~]# nmcli connection show
名称    UUID                                  类型            设备   
eht1    4cb9f43e-77d6-455f-990c-620e4a12d52b  802-3-ethernet  eth1          //已经添加的网卡
eth0    4f5f8b5d-4b51-4e1c-98c7-40f0eb90f241  802-3-ethernet  eth0   
virbr0  566dccb2-cbb0-4bbe-a714-06f3d313d9cd  bridge          virbr0

2. Configure gateway

[root@mysql51 ~]# systemctl stop NetworkManager    //配置网关,需先停止网络管理   
[root@mysql51 ~]# route -n                  //查看网关Gateway       
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
192.168.4.0     0.0.0.0         255.255.255.0   U     100    0        0 eth0
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0
[root@mysql51 ~]# route add default gw 192.168.4.50                 
    route: SIOCADDRT: Network is unreachable    //配置网关,出现网络不可达,重新配置ip
[root@mysql51 ~]# route add default gw 192.168.4.50
[root@mysql51 ~]# route -n
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         192.168.4.50    0.0.0.0         UG    0      0        0 eth0       
192.168.4.0     0.0.0.0         255.255.255.0   U     100    0        0 eth0
192.168.122.0   0.0.0.0         255.255.255.0   U     0      0        0 virbr0

Recommended: linux server maintenance

The above is the detailed content of Linux network is unreachable. For more information, please follow other related articles on the PHP Chinese website!

Statement:
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn