Many friends have encountered the problem of a blue screen when turning on the computer after reinstalling the system. The blue screen of the system is a headache. I will help you solve the reinstallation problem after get off work. The troublesome problem of system blue screen is as follows. The following are the causes and solutions of blue screen when reinstalling the system. Friends in need can refer to the following.
Causes and solutions to system blue screens
1. The hard disk does not have much remaining space or there are too many fragments
When using a computer, you must ensure that it is a computer Reserve a certain amount of disk space and defragment the computer regularly;
2. Blue screen caused by memory overclocking or instability
It may be caused by memory overclocking or instability. Prompts the computer to blue screen.
3. The motherboard BIOS does not support the ACPI specification very well
(1): Remove the battery from the motherboard and reinstall it after a while.
(2): When reinstalling the system, when the "press F6 if you need to install a third-party SCSI or RAID driver\\\\" prompt appears, press F7 key, Windows will automatically disable the installation of ACPI HAL and install Standard PC HAL.
4. There are errors or damage in the registry
The registry saves the system's hardware configuration and applications Important data such as program settings and user information, if the registry has errors or is damaged, a "blue screen" is likely to occur. When using a computer on a daily basis, you should detect and repair it in time to avoid greater losses
5. Software and hardware incompatibility
New technologies and new hardware are developing rapidly. If you install new Hardware often appears "blue screen", which is mostly related to the motherboard's BIOS or driver being too old.
6. System hardware conflict
This phenomenon leads to "blue screen" which is also common. For example, what is often encountered is the setting conflict of the sound card or display card. The solution is: click "Control Panel", "System", and in "Device Management" check whether there is a device with a yellow question mark or exclamation mark. If it exists, try to delete it first and restart the computer. You can also reinstall or upgrade the corresponding driver;
7. Too many programs loaded at startup
Loading too many programs at startup can also cause a blue screen on the computer, so do not load it at startup Load too many applications at the same time to avoid exhausting system resources and causing computer hardware failure
8. Defects in the system itself
There are some problems in the reinstalled system itself. It is recommended that you install the original system to solve the problem.
The above is the detailed content of How to solve the blue screen after reinstalling the system. For more information, please follow other related articles on the PHP Chinese website!