What should I do if Windows 10 keeps showing that the system is being restored?

The solution to Windows 10 always showing that the system is being restored: 1. Prepare the system CD and use the CD to reinstall the system; 2. Make the U disk into a PE boot disk and use the U disk to install the operating system.

#The operating environment of this article: Windows 10 system, Dell G3 computer.

If the restore continues to fail, then in this case, you can only choose to reinstall the operating system to restore the computer system.

There are two ways to reinstall the operating system: CD reinstallation and U disk reinstallation. It is recommended to use CD reinstallation.

Method 1: Use the CD to reinstall the system. The steps are as follows:

1). Prepare the system CD: If you don’t have one, you can go to a computer store to buy it. What needs to be installed? Just buy the latest version of the system CD. If you have a CD-ROM drive, you can also go online to download system files in ISO format and burn them into a system CD.

2), set the CD to start: After booting, press the DEL key (usually F2 for notebooks, please note that the keys are different for different motherboards, please check the motherboard manual for details) to enter CMOS, and in the BOOT tab (or startups ), set the optical drive (CD-ROM or DVD-ROM) as the first boot item (older motherboards need to enter the Advanced BIOS Features tab, press Enter at "1st Boot Device", and then select CD/DVD-ROM), and then Press F10 to save, exit and restart. When restarting the computer, promptly insert the system CD into the CD-ROM drive.

#3). Clone the installation system: After the CD is successfully started, the function menu will be displayed. At this time, select "Install system to the first partition of the hard disk" in the menu and press Enter to confirm. Then follow the prompts, or after entering the PE system, run the "one-click installation system" on the desktop. The computer will automatically run the GHOST software and automatically load the GHO file, clone it, and install it in area C. The whole process basically requires no manual intervention until the system is finally entered. desktop.

Method 2: Use a U disk to install the operating system

If the computer does not have a CD-ROM drive, you need to use a U disk to install the operating system:

1. Prepare a 4G or above U disk in advance, download PE software (such as Chinese cabbage, u master, etc.) and ghost version win10 or other operating system installation programs (which must be the same as the original system) online.

2. First, make the U disk into a pe boot disk. Search on Baidu and download the U disk boot creation tool. After the download is completed, open the startup installation program on the computer and install the U disk boot creation tool according to the prompts. to the computer.

3. After the installation is completed, double-click the PE software, insert the USB disk and wait for the software to successfully read the USB disk. Click "One-click production" to complete the production of the USB boot disk using the system default mode. , after the production is completed, please copy the downloaded ghost operating system to the USB flash drive. Here you need to pay attention to choosing the U disk.

4. Insert the prepared USB boot disk into the USB interface, then restart the computer. When the startup screen appears, enter CMOS by using the DEL key, and then Set the U disk as the first startup item, boot the U disk to the PE main menu interface, use the up and down keys on the keyboard to select "Run win2003pe classic version or win8pe standard version" and press the Enter key.

5. The system will enter the pe desktop under the pe boot, open the "installation tool" provided by the pe system, and then copy the downloaded ghost version operating system to a partition other than the C drive, click Eject the USB flash drive and unplug it (this will prevent the system from automatically using the USB flash drive to start the computer when restarting the computer), then click Browse, add the win10 image file, select the c drive as the installation disk, and click OK.

#6. Click OK in the pop-up execution restore window. At this time, you have to wait for the system to restore itself. The operation cannot be interrupted midway, and the power cannot be cut off.

#7. After the image file is restored, the computer will automatically restart and start the installation. No manual operation is required during this period.​

8. After the system installation is completed, the computer will restart again and successfully enter the desktop.

After the above operations are successfully completed, the installation of the operating system using the USB disk is completed, and the computer can resume normal use.

Note:

1. Before system installation, be sure to save the file information on the C drive before entering the pe desktop.

2. After the system installation is completed, you can first install software such as Computer Manager or Security Guard, and anti-virus software to conduct a comprehensive search and kill of Trojans and viruses, then apply system patches, install commonly used software, and download and install them. One-click restore tool for system backup in case of emergency.

The above is the detailed content of What should I do if Windows 10 keeps showing that the system is being restored?. For more information, please follow other related articles on the PHP Chinese website!