How to modularize require.js with front-end js

requirejs is a JavaScript file and module loader. requireJS allows you to separate your JavaScript code into files and modules while managing the dependencies between each module.

1. Why use require.js?

In the earliest days, all Javascript codes were written in one file, and it was enough to load this one file. Later, there were more and more codes, and one file was no longer enough. It had to be divided into multiple files and loaded in sequence. I believe many people have seen the following web page code:

　　<script src="1.js"></script>　
　<script src="2.js"></script>
　　<script src="3.js"></script>　
　<script src="4.js"></script>　　
<script src="5.js"></script>　
　<script src="6.js"></script>

This code loads multiple js files in sequence.

This way of writing has great disadvantages.

First of all, when loading, the browser will stop rendering the web page. The more files are loaded, the longer the web page will lose response.

Due to dependencies between js files, it must Strictly ensure the loading order (for example, 1.js in the above example must be before 2.js), and the module with the greatest dependency must be loaded last. When dependencies are complex, code writing and maintenance will become difficult. .

require.js was born to solve these two problems:

realize asynchronous loading of js files to avoid web pages losing response;

manage dependencies between modules It makes it easier to write and maintain code.

2. Loading require.js

The first step to use require.js is to download the latest version from the official website.

After downloading, it is assumed that it is placed under the js subdirectory and it can be loaded.
　
7c439788e166f531c8ad0b30265c71032cacc6d41bbb37262a98f745aa00fbf0

Some people may think that loading this file may also cause the web page to lose response. There are two solutions:

The async attribute indicates that this file needs to be loaded asynchronously to avoid the web page becoming unresponsive. IE does not support this attribute and only supports defer, so defer is also written.

The data-main attribute is used to specify the main module of the web page program.

In the above example, it is main.js under the js directory. This file will be loaded by require.js first. Since the default file extension of require.js is js, main.js can be abbreviated to main.

After loading require.js, the next step is to load our own code. Assume that our own code file is main.js and is also placed under the js directory. Then, just write it like this:
　

<script src="js/require.js" data-main="js/main"></script>

One is to load it at the bottom of the web page, and the other is to write it like this:
　

<script src="js/require.js" defer async="true" ></script>

3. How to write the main module

The main.js in the previous section, I call it the "main module", which means the entry code of the entire web page. It is a bit like the main() function in C language, all code starts running from here.

Let’s take a look at how to write main.js.

If our code does not depend on any other modules, we can write javascript code directly.
　

// main.js
alert("加载成功！");

But in this case, there is no need to use require.js. A really common situation is that the main module depends on other modules, in which case the require() function defined by the AMD specification must be used.
　

// main.js
require(['moduleA', 'moduleB', 'moduleC'], function (moduleA, moduleB, moduleC){
// some code here
});

> The require() function accepts two parameters. The first parameter:
- An array indicating the modules it depends on. The above example is ['moduleA', 'moduleB', 'moduleC'], that is, the main module depends on these three modules;
- A callback Function, it will be called after all the previously specified modules are loaded successfully. Loaded modules will be passed into this function as parameters, so these modules can be used inside the callback function.

require() loads moduleA, moduleB and moduleC asynchronously, and the browser will not lose response; the callback function it specifies will only run after the previous modules are loaded successfully, solving dependencies. The problem.

Below, let’s look at a practical example.

Assuming that the main module depends on the three modules jquery, underscore and backbone, main.js can be written like this:

require(['jquery', 'underscore', 'backbone'], function ($, _, Backbone){
// some code here
});

require.js will load jQuery and underscore first and backbone before running the callback function. The code of the main module is written in the callback function.

4. Module loading

In the last example of the previous section, the dependent modules of the main module are ['jquery', 'underscore', 'backbone']. By default, require.js assumes that these three modules are in the same directory as main.js, with the file names being jquery.js, underscore.js and backbone.js, and then loads them automatically.

Using the require.config() method, we can customize the loading behavior of the module. require.config() is written at the head of the main module (main.js). The parameter is an object, and the paths attribute of this object specifies the loading path of each module.
　

require.config({
paths: {
"jquery": "jquery.min",
"underscore": "underscore.min",
"backbone": "backbone.min"
}
});

The above code gives the file names of the three modules. The path defaults to the same directory as main.js (js subdirectory). If these modules are in other directories, such as the js/lib directory, there are two ways to write them.

One is to specify the paths one by one.
　

require.config({
baseUrl: "js/lib",
paths: {"jquery": "jquery.min", "underscore": "underscore.min", "backbone": "backbone.min"}
});

The other is to directly change the base directory (baseUrl).

require.config({    baseUrl: "js/lib",
    paths: {        "jquery": "jquery.min",        "underscore": "underscore.min",        "backbone": "backbone.min"
    }
});

If a module is on another host, you can also specify its URL directly, such as:
　

require.config({
　　　paths: {
　　　　　"jquery": "https://ajax.googleapis.com/ajax/libs/jquery/1.7.2/jquery.min"
　　　}
});

require.js requirement:

每个模块是一个单独的js文件。这样的话，如果加载多个模块，就会发出多次HTTP请求，会影响网页的加载速度。因此，require.js提供了一个优化工具，当模块部署完毕以后，可以用这个工具将多个模块合并在一个文件中，减少HTTP请求数。

五、AMD模块的写法

require.js加载的模块，采用AMD规范。也就是说，模块必须按照AMD的规定来写。

具体来说，就是模块必须采用特定的define()函数来定义。如果一个模块不依赖其他模块，那么可以直接定义在define()函数之中。

假定现在有一个math.js文件，它定义了一个math模块。那么，math.js就要这样写：
　　

// math.js
　　define(function (){
　　　　var add = function (x,y){
　　　　　　return x+y;
　　　　};
　　　　return {
　　　　　　add: add
　　　　};
　　});

加载方法如下：
　　

// main.js
　require(['math'], function (math){
　　　alert(math.add(1,1));
　});

如果这个模块还依赖其他模块，那么define()函数的第一个参数，必须是一个数组，指明该模块的依赖性。
　　

define(['myLib'], function(myLib){
　　　　function foo(){
　　　　　　myLib.doSomething();
　　　　}
　　　　return {
　　　　　　foo : foo
　　　　};
　　});

当require()函数加载上面这个模块的时候，就会先加载myLib.js文件。

六、加载非规范的模块

理论上，require.js加载的模块，必须是按照AMD规范、用define()函数定义的模块。但是实际上，虽然已经有一部分流行的函数库（比如jQuery）符合AMD规范，更多的库并不符合。那么，require.js是否能够加载非规范的模块呢？

回答是可以的。

这样的模块在用require()加载之前，要先用require.config()方法，定义它们的一些特征。

举例来说，underscore和backbone这两个库，都没有采用AMD规范编写。如果要加载它们的话，必须先定义它们的特征。
　　

require.config({
shim: { 'underscore': {              exports: '_'

         },          'backbone': {
              deps: ['underscore', 'jquery'],              exports: 'Backbone'
          }
      }
  });

require.config()接受一个配置对象，这个对象除了有前面说过的paths属性之外，还有一个shim属性，专门用来配置不兼容的模块。具体来说，每个模块要定义（1）exports值（输出的变量名），表明这个模块外部调用时的名称；（2）deps数组，表明该模块的依赖性。
比如，jQuery的插件可以这样定义：

 　　shim: {
  　　　　'jquery.scroll': {
  　　　　　　deps: ['jquery'],
  　　　　　　exports: 'jQuery.fn.scroll'
  　　　　}
  　　}

七、require.js插件

require.js还提供一系列插件，实现一些特定的功能:

domready插件，可以让回调函数在页面DOM结构加载完成后再运行。

require(['domready!'], function (doc) {     // called once the DOM is ready
 });

text和image插件，则是允许require.js加载文本和图片文件。
　　

define(['text!review.txt','image!cat.jpg'],
        function (review, cat) {             console.log(review);             document.body.appendChild(cat);         } );

类似的插件还有json和mdown，用于加载json文件和markdown文件

本篇介绍了用前端js模块化编写require.js，想要更多相关学习内容请关注php中文网。

相关推荐：

关于AJAX ASP/PHP 请求实例的相关知识

关于AJAX中 XML 的实例讲解

关于 AJAX 投票的演示

The above is the detailed content of How to modularize require.js with front-end js. For more information, please follow other related articles on the PHP Chinese website!