PHP implementation in common redis usage scenarios

The content of this article is about PHP implementation in common usage scenarios of redis. It has certain reference value. Now I share it with you. Friends in need can refer to it

at http://www. redis.net.cn/ You can find all information about redis, including installation, commands, use in programming languages, etc. I won’t talk about how to install redis here, because you can find it on the website above. Let’s talk directly about how redis is used in php. Here I choose the phpredis extension.

1. Download the phpredis extension

Execute the phpinfo() function and select the corresponding compressed package according to "NTS" and "VCn" in the screenshot below, https://github.com/phpredis /phpredis/downloads. Also note that the PHP version must also correspond.

2. PHP configuration and installation extension

First put the php_igbinary.dll and php_redis.dll files in the compressed package into PHP In the ext directory of the installation directory

Then add the following configuration in php.ini

extension=php_igbinary.dll
extension=php_redis.dll

3. Restart apache and execute the phpinfo() function, you will find that there are more redis Extension.

4. Start the Redis service and test

    $redis = new Redis();    //连接redis服务器
    $redis->connect('127.0.0.1', '6379');    echo "Connection to server sucessfully 076402276aae5dbec7f672f8f4e5cc81";    //查看服务是否运行
    echo "Server is running: " . $redis->ping();

The results are as follows, the connection to the redis server is successful

Connection to server sucessfully 
Server is running: +PONG

At this point, we can I am happily using redis.

1     $redis = new Redis(); 
2     //连接redis服务器 
3     $redis->connect('127.0.0.1', '6379'); 
4  
5  
6     $key = "key"; 
7     $val = "val"; 
8  
9     //redis key操作
10     $redis->exists($key);           //判断key值是否存在
11     $redis->expire($key, 10);       //设置key在10秒后过期
12 
13     //redis string 字符串
14     $redis->set($key, $val);
15     $redis->incr($key);         //key值+1，除非val是整数，否则函数执行失败
16     $redis->decr($key);         //key值-1，同上
17     $redis->append($key, "ue"); //追加key值内容
18     $redis->strlen($key);       //返回key值的长度
19 
20     //当第一次设置key值后，key值的数据类型就不能改变了。
21     $redis->del($key);  //删除key值
22 
23     //redis hash 哈希
24     $redis->hset($key, 'field1', 'val1');   //设置一个key-value键值对
25     $redis->hmset($key, array('field2'=>'val2', 'field3'=>'val3'));    //设置多个k-v键值对26     $redis->hget($key, 'field2');           //获取hash其中的一个键值
27     $redis->hmget($key, array('field2', 'field1'));    //获取hash的多个键值
28     $redis->hgetall($key);  //获取hash中所有的键值对
29     $redis->hlen($key);     //获取hash中键值对的个数
30     $redis->hkeys($key);   //获取hash中所有的键
31     $redis->hvals($key);    //获取hash中所有的值
32     $redis->del($key);  //删除key值
33 
34     //redis list 列表
35     $index = $start = 0;
36     $redis->lpush($key, 'val1', 'val2');    //在list的开头添加多个值
37     $redis->lpop($key); //移除并获取list的第一个元素
38     $redis->rpop($key); //移除并获取list的最后一个元素
39     $stop = $redis->llen($key) - 1; //获取list的长度
40     $redis->lindex($key, $index);   //通过索引获取list元素
41     $redis->lrange($key, $start, $stop);    //获取指定范围内的元素
42 
43     $redis->del($key);
44 
45     //redis set 无序集合
46     $redis->sadd($key, 'val1', 'val2'); //向集合中添加多个元素
47     $redis->scard($key);    //获取集合元素个数
48     $redis->spop($key); //移除并获取集合内随机一个元素
49     $redis->srem($key, 'val1', 'val2'); //移除集合的多个元素
50     $redis->sismember($key, 'val1');    //判断元素是否存在于集合内
51 
52     $redis->del($key);
53     //redis sorted set 有序集合
54     //有序集合里的元素都和一个分数score关联，就靠这个分数score对元素进行排序
55     $redis->zadd($key, $score1, $val1, $score2, $val2); //向集合内添加多个元素
56     $redis->zcard($key);    //获取集合内元素总数
57     $redis->zcount($key, $minScore, $maxScore); //获取集合内分类范围内的元素
58     $redis->zrem($key, $member1, $member2); //移除集合内多个元素

Attachment: Source code of Redis class

<?php
/**
 * Helper autocomplete for php redis extension
 * @author Max Kamashev <max.kamashev@gmail.com>
 * @link https://github.com/ukko/phpredis-phpdoc
 *
 * @method echo string $string Sends a string to Redis, which replies with the same string
 *
 * @method  eval( $script, $args = array(), $numKeys = 0 )
 *  Evaluate a LUA script serverside
 *  @param  string  $script
 *  @param  array   $args
 *  @param  int     $numKeys
 *  @return Mixed.  What is returned depends on what the LUA script itself returns, which could be a scalar value
 *  (int/string), or an array. Arrays that are returned can also contain other arrays, if that&#39;s how it was set up in
 *  your LUA script.  If there is an error executing the LUA script, the getLastError() function can tell you the
 *  message that came back from Redis (e.g. compile error).
 *  @link   http://redis.io/commands/eval
 *  @example
 *  <pre class="brush:php;toolbar:false">
 *  $redis->eval("return 1"); // Returns an integer: 1
 *  $redis->eval("return {1,2,3}"); // Returns Array(1,2,3)
 *  $redis->del(&#39;mylist&#39;);
 *  $redis->rpush(&#39;mylist&#39;,&#39;a&#39;);
 *  $redis->rpush(&#39;mylist&#39;,&#39;b&#39;);
 *  $redis->rpush(&#39;mylist&#39;,&#39;c&#39;);
 *  // Nested response:  Array(1,2,3,Array(&#39;a&#39;,&#39;b&#39;,&#39;c&#39;));
 *  $redis->eval("return {1,2,3,redis.call(&#39;lrange&#39;,&#39;mylist&#39;,0,-1)}}");
 * 

* */ class Redis { const AFTER = 'after'; const BEFORE = 'before'; /** * Options */ const OPT_SERIALIZER = 1; const OPT_PREFIX = 2; const OPT_READ_TIMEOUT = 3; const OPT_SCAN = 4; /** * Serializers */ const SERIALIZER_NONE = 0; const SERIALIZER_PHP = 1; const SERIALIZER_IGBINARY = 2; /** * Multi */ const ATOMIC = 0; const MULTI = 1; const PIPELINE = 2; /** * Type */ const REDIS_NOT_FOUND = 0; const REDIS_STRING = 1; const REDIS_SET = 2; const REDIS_LIST = 3; const REDIS_ZSET = 4; const REDIS_HASH = 5; /** * Scan */ const SCAN_NORETRY = 0; const SCAN_RETRY = 1; /** * Creates a Redis client * * @example $redis = new Redis(); */ public function __construct( ) {} /** * Connects to a Redis instance. * * @param string $host can be a host, or the path to a unix domain socket * @param int $port optional * @param float $timeout value in seconds (optional, default is 0.0 meaning unlimited) * @return bool TRUE on success, FALSE on error. *

     * $redis->connect('127.0.0.1', 6379);
     * $redis->connect('127.0.0.1');            // port 6379 by default
     * $redis->connect('127.0.0.1', 6379, 2.5); // 2.5 sec timeout.
     * $redis->connect('/tmp/redis.sock');      // unix domain socket.
     * 

*/ public function connect( $host, $port = 6379, $timeout = 0.0 ) {} /** * Set the string value in argument as value of the key, with a time to live. * * @param string $key * @param int $ttl in milliseconds * @param string $value * @return bool: TRUE if the command is successful. * @link http://redis.io/commands/setex * $redis->psetex('key', 100, 'value'); // sets key → value, with 0.1 sec TTL. */ public function psetex($key, $ttl, $value) {} /** * Scan a set for members. * * @see scan() * @param string $key * @param int $iterator * @param string $pattern * @param int $count * @return array|bool */ public function sScan($key, $iterator, $pattern = '', $count = 0) {} /** * Scan the keyspace for keys. * * @param int $iterator * @param string $pattern * @param int $count How many keys to return in a go (only a sugestion to Redis) * @return array|bool an array of keys or FALSE if there are no more keys * @link http://redis.io/commands/scan *

     * $it = NULL; // Initialize our iterator to NULL
     * $redis->setOption(Redis::OPT_SCAN, Redis::SCAN_RETRY); // retry when we get no keys back
     * while($arr_keys = $redis->scan($it)) {
     *   foreach($arr_keys as $str_key) {
     *     echo "Here is a key: $str_key\n";
     *   }
     *   echo "No more keys to scan!\n";
     * }
     * 

*/ public function scan($iterator, $pattern = '', $count = 0) {} /** * Scan a sorted set for members, with optional pattern and count. * * @see scan() * @param string $key * @param int $iterator * @param string $pattern * @param int $count * @return array|bool */ public function zScan($key, $iterator, $pattern = '', $count = 0) {} /** * Scan a HASH value for members, with an optional pattern and count. * * @see scan() * @param string $key * @param int $iterator * @param string $pattern * @param int $count * @return array */ public function hScan($key, $iterator, $pattern = '', $count = 0) {} /** * Issue the CLIENT command with various arguments. * @param string $command list | getname | setname | kill * @param string $arg * @return mixed * @link http://redis.io/commands/client-list * @link http://redis.io/commands/client-getname * @link http://redis.io/commands/client-setname * @link http://redis.io/commands/client-kill *

     * $redis->client('list');
     * $redis->client('getname');
     * $redis->client('setname', 'somename');
     * $redis->client(&#39;kill&#39;, <ip:port>);
     * 

* * * CLIENT LIST will return an array of arrays with client information. * CLIENT GETNAME will return the client name or false if none has been set * CLIENT SETNAME will return true if it can be set and false if not * CLIENT KILL will return true if the client can be killed, and false if not */ public function client($command, $arg = '') {} /** * Access the Redis slow log. * * @param string $command get | len | reset * @return mixed * @link http://redis.io/commands/slowlog *

     * // Get ten slowlog entries
     * $redis->slowlog('get', 10);
     *
     * // Get the default number of slowlog entries
     * $redis->slowlog('get');
     *
     * // Reset our slowlog
     * $redis->slowlog('reset');
     *
     * // Retrieve slowlog length
     * $redis->slowlog('len');
     * 

*/ public function slowlog($command) {} /** * @see connect() * @param string $host * @param int $port * @param float $timeout */ public function open( $host, $port = 6379, $timeout = 0.0 ) {} /** * Connects to a Redis instance or reuse a connection already established with pconnect/popen. * * The connection will not be closed on close or end of request until the php process ends. * So be patient on to many open FD's (specially on redis server side) when using persistent connections on * many servers connecting to one redis server. * * Also more than one persistent connection can be made identified by either host + port + timeout * or unix socket + timeout. * * This feature is not available in threaded versions. pconnect and popen then working like their non persistent * equivalents. * * @param string $host can be a host, or the path to a unix domain socket * @param int $port optional * @param float $timeout value in seconds (optional, default is 0 meaning unlimited) * @return bool TRUE on success, FALSE on ertcnror. *

     * $redis->connect('127.0.0.1', 6379);
     * $redis->connect('127.0.0.1');            // port 6379 by default
     * $redis->connect('127.0.0.1', 6379, 2.5); // 2.5 sec timeout.
     * $redis->connect('/tmp/redis.sock');      // unix domain socket.
     * 

*/ public function pconnect( $host, $port = 6379, $timeout = 0.0 ) {} /** * @see pconnect() * @param string $host * @param int $port * @param float $timeout */ public function popen( $host, $port = 6379, $timeout = 0.0 ) {} /** * Disconnects from the Redis instance, except when pconnect is used. */ public function close( ) {} /** * Set client option. * * @param string $name parameter name * @param string $value parameter value * @return bool: TRUE on success, FALSE on error. * @example *

     * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_NONE);        // don't serialize data
     * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_PHP);         // use built-in serialize/unserialize
     * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_IGBINARY);    // use igBinary serialize/unserialize
     * $redis->setOption(Redis::OPT_PREFIX, 'myAppName:');                      // use custom prefix on all keys
     * 

*/ public function setOption( $name, $value ) {} /** * Get client option * * @param string $name parameter name * @return int Parameter value. * @example * // return Redis::SERIALIZER_NONE, Redis::SERIALIZER_PHP, or Redis::SERIALIZER_IGBINARY. * $redis->getOption(Redis::OPT_SERIALIZER); */ public function getOption( $name ) {} /** * Check the current connection status * * @return string STRING: +PONG on success. Throws a RedisException object on connectivity error, as described above. * @link http://redis.io/commands/ping */ public function ping( ) {} /** * Get the value related to the specified key * * @param string $key * @return string|bool: If key didn't exist, FALSE is returned. Otherwise, the value related to this key is returned. * @link http://redis.io/commands/get * @example $redis->get('key'); */ public function get( $key ) {} /** * Set the string value in argument as value of the key. * * @param string $key * @param string $value * @param int $timeout [optional] Calling setex() is preferred if you want a timeout. * @return bool: TRUE if the command is successful. * @link http://redis.io/commands/set * @example $redis->set('key', 'value'); */ public function set( $key, $value, $timeout = 0 ) {} /** * Set the string value in argument as value of the key, with a time to live. * * @param string $key * @param int $ttl * @param string $value * @return bool: TRUE if the command is successful. * @link http://redis.io/commands/setex * @example $redis->setex('key', 3600, 'value'); // sets key → value, with 1h TTL. */ public function setex( $key, $ttl, $value ) {} /** * Set the string value in argument as value of the key if the key doesn't already exist in the database. * * @param string $key * @param string $value * @return bool: TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/setnx * @example *

     * $redis->setnx('key', 'value');   // return TRUE
     * $redis->setnx('key', 'value');   // return FALSE
     * 

*/ public function setnx( $key, $value ) {} /** * Remove specified keys. * * @param int|array $key1 An array of keys, or an undefined number of parameters, each a key: key1 key2 key3 ... keyN * @param string $key2 ... * @param string $key3 ... * @return int Number of keys deleted. * @link http://redis.io/commands/del * @example *

     * $redis->set('key1', 'val1');
     * $redis->set('key2', 'val2');
     * $redis->set('key3', 'val3');
     * $redis->set('key4', 'val4');
     * $redis->delete('key1', 'key2');          // return 2
     * $redis->delete(array('key3', 'key4'));   // return 2
     * 

*/ public function del( $key1, $key2 = null, $key3 = null ) {} /** * @see del() * @param $key1 * @param null $key2 * @param null $key3 */ public function delete( $key1, $key2 = null, $key3 = null ) {} /** * Enter and exit transactional mode. * * @internal param Redis::MULTI|Redis::PIPELINE * Defaults to Redis::MULTI. * A Redis::MULTI block of commands runs as a single transaction; * a Redis::PIPELINE block is simply transmitted faster to the server, but without any guarantee of atomicity. * discard cancels a transaction. * @return Redis returns the Redis instance and enters multi-mode. * Once in multi-mode, all subsequent method calls return the same object until exec() is called. * @link http://redis.io/commands/multi * @example *

     * $ret = $redis->multi()
     *      ->set('key1', 'val1')
     *      ->get('key1')
     *      ->set('key2', 'val2')
     *      ->get('key2')
     *      ->exec();
     *
     * //$ret == array (
     * //    0 => TRUE,
     * //    1 => 'val1',
     * //    2 => TRUE,
     * //    3 => 'val2');
     * 

*/ public function multi( ) {} /** * @see multi() * @link http://redis.io/commands/exec */ public function exec( ) {} /** * @see multi() * @link http://redis.io/commands/discard */ public function discard( ) {} /** * Watches a key for modifications by another client. If the key is modified between WATCH and EXEC, * the MULTI/EXEC transaction will fail (return FALSE). unwatch cancels all the watching of all keys by this client. * @param string | array $key: a list of keys * @return void * @link http://redis.io/commands/watch * @example *

     * $redis->watch('x');
     * // long code here during the execution of which other clients could well modify `x`
     * $ret = $redis->multi()
     *          ->incr('x')
     *          ->exec();
     * // $ret = FALSE if x has been modified between the call to WATCH and the call to EXEC.
     * 

*/ public function watch( $key ) {} /** * @see watch() * @link http://redis.io/commands/unwatch */ public function unwatch( ) {} /** * Subscribe to channels. Warning: this function will probably change in the future. * * @param array $channels an array of channels to subscribe to * @param string | array $callback either a string or an array($instance, 'method_name'). * The callback function receives 3 parameters: the redis instance, the channel name, and the message. * @link http://redis.io/commands/subscribe * @example *

     * function f($redis, $chan, $msg) {
     *  switch($chan) {
     *      case 'chan-1':
     *          ...
     *          break;
     *
     *      case 'chan-2':
     *                     ...
     *          break;
     *
     *      case 'chan-2':
     *          ...
     *          break;
     *      }
     * }
     *
     * $redis->subscribe(array('chan-1', 'chan-2', 'chan-3'), 'f'); // subscribe to 3 chans
     * 

*/ public function subscribe( $channels, $callback ) {} /** * Subscribe to channels by pattern * * @param array $patterns The number of elements removed from the set. * @param string|array $callback Either a string or an array with an object and method. * The callback will get four arguments ($redis, $pattern, $channel, $message) * @link http://redis.io/commands/psubscribe * @example *

     * function psubscribe($redis, $pattern, $chan, $msg) {
     *  echo "Pattern: $pattern\n";
     *  echo "Channel: $chan\n";
     *  echo "Payload: $msg\n";
     * }
     * 

*/ public function psubscribe( $patterns, $callback ) {} /** * Publish messages to channels. Warning: this function will probably change in the future. * * @param string $channel a channel to publish to * @param string $message string * @link http://redis.io/commands/publish * @return int Number of clients that received the message * @example $redis->publish('chan-1', 'hello, world!'); // send message. */ public function publish( $channel, $message ) {} /** * Verify if the specified key exists. * * @param string $key * @return bool: If the key exists, return TRUE, otherwise return FALSE. * @link http://redis.io/commands/exists * @example *

     * $redis->set('key', 'value');
     * $redis->exists('key');               //  TRUE
     * $redis->exists('NonExistingKey');    // FALSE
     * 

*/ public function exists( $key ) {} /** * Increment the number stored at key by one. * * @param string $key * @return int the new value * @link http://redis.io/commands/incr * @example *

     * $redis->incr('key1'); // key1 didn't exists, set to 0 before the increment and now has the value 1
     * $redis->incr('key1'); // 2
     * $redis->incr('key1'); // 3
     * $redis->incr('key1'); // 4
     * 

*/ public function incr( $key ) {} /** * Increment the float value of a key by the given amount * * @param string $key * @param float $increment * @return float * @link http://redis.io/commands/incrbyfloat * @example *

     * $redis = new Redis();
     * $redis->connect('127.0.0.1');
     * $redis->set('x', 3);
     * var_dump( $redis->incrByFloat('x', 1.5) );   // float(4.5)
     *
     * // ! SIC
     * var_dump( $redis->get('x') );                // string(3) "4.5"
     * 

*/ public function incrByFloat( $key, $increment ) {} /** * Increment the number stored at key by one. If the second argument is filled, it will be used as the integer * value of the increment. * * @param string $key key * @param int $value value that will be added to key (only for incrBy) * @return int the new value * @link http://redis.io/commands/incrby * @example *

     * $redis->incr('key1');        // key1 didn't exists, set to 0 before the increment and now has the value 1
     * $redis->incr('key1');        // 2
     * $redis->incr('key1');        // 3
     * $redis->incr('key1');        // 4
     * $redis->incrBy('key1', 10);  // 14
     * 

*/ public function incrBy( $key, $value ) {} /** * Decrement the number stored at key by one. * * @param string $key * @return int the new value * @link http://redis.io/commands/decr * @example *

     * $redis->decr('key1'); // key1 didn't exists, set to 0 before the increment and now has the value -1
     * $redis->decr('key1'); // -2
     * $redis->decr('key1'); // -3
     * 

*/ public function decr( $key ) {} /** * Decrement the number stored at key by one. If the second argument is filled, it will be used as the integer * value of the decrement. * * @param string $key * @param int $value that will be substracted to key (only for decrBy) * @return int the new value * @link http://redis.io/commands/decrby * @example *

     * $redis->decr('key1');        // key1 didn't exists, set to 0 before the increment and now has the value -1
     * $redis->decr('key1');        // -2
     * $redis->decr('key1');        // -3
     * $redis->decrBy('key1', 10);  // -13
     * 

*/ public function decrBy( $key, $value ) {} /** * Get the values of all the specified keys. If one or more keys dont exist, the array will contain FALSE at the * position of the key. * * @param array $keys Array containing the list of the keys * @return array Array containing the values related to keys in argument * @example *

     * $redis->set('key1', 'value1');
     * $redis->set('key2', 'value2');
     * $redis->set('key3', 'value3');
     * $redis->getMultiple(array('key1', 'key2', 'key3')); // array('value1', 'value2', 'value3');
     * $redis->getMultiple(array('key0', 'key1', 'key5')); // array(`FALSE`, 'value2', `FALSE`);
     * 

*/ public function getMultiple( array $keys ) {} /** * Adds the string values to the head (left) of the list. Creates the list if the key didn't exist. * If the key exists and is not a list, FALSE is returned. * * @param string $key * @param string $value1 String, value to push in key * @param string $value2 Optional * @param string $valueN Optional * @return int The new length of the list in case of success, FALSE in case of Failure. * @link http://redis.io/commands/lpush * @example *

     * $redis->lPush('l', 'v1', 'v2', 'v3', 'v4')   // int(4)
     * var_dump( $redis->lRange('l', 0, -1) );
     * //// Output:
     * // array(4) {
     * //   [0]=> string(2) "v4"
     * //   [1]=> string(2) "v3"
     * //   [2]=> string(2) "v2"
     * //   [3]=> string(2) "v1"
     * // }
     * 

*/ public function lPush( $key, $value1, $value2 = null, $valueN = null ) {} /** * Adds the string values to the tail (right) of the list. Creates the list if the key didn't exist. * If the key exists and is not a list, FALSE is returned. * * @param string $key * @param string $value1 String, value to push in key * @param string $value2 Optional * @param string $valueN Optional * @return int The new length of the list in case of success, FALSE in case of Failure. * @link http://redis.io/commands/rpush * @example *

     * $redis->rPush('l', 'v1', 'v2', 'v3', 'v4');    // int(4)
     * var_dump( $redis->lRange('l', 0, -1) );
     * //// Output:
     * // array(4) {
     * //   [0]=> string(2) "v1"
     * //   [1]=> string(2) "v2"
     * //   [2]=> string(2) "v3"
     * //   [3]=> string(2) "v4"
     * // }
     * 

*/ public function rPush( $key, $value1, $value2 = null, $valueN = null ) {} /** * Adds the string value to the head (left) of the list if the list exists. * * @param string $key * @param string $value String, value to push in key * @return int The new length of the list in case of success, FALSE in case of Failure. * @link http://redis.io/commands/lpushx * @example *

     * $redis->delete('key1');
     * $redis->lPushx('key1', 'A');     // returns 0
     * $redis->lPush('key1', 'A');      // returns 1
     * $redis->lPushx('key1', 'B');     // returns 2
     * $redis->lPushx('key1', 'C');     // returns 3
     * // key1 now points to the following list: [ 'A', 'B', 'C' ]
     * 

*/ public function lPushx( $key, $value ) {} /** * Adds the string value to the tail (right) of the list if the ist exists. FALSE in case of Failure. * * @param string $key * @param string $value String, value to push in key * @return int The new length of the list in case of success, FALSE in case of Failure. * @link http://redis.io/commands/rpushx * @example *

     * $redis->delete('key1');
     * $redis->rPushx('key1', 'A'); // returns 0
     * $redis->rPush('key1', 'A'); // returns 1
     * $redis->rPushx('key1', 'B'); // returns 2
     * $redis->rPushx('key1', 'C'); // returns 3
     * // key1 now points to the following list: [ 'A', 'B', 'C' ]
     * 

*/ public function rPushx( $key, $value ) {} /** * Returns and removes the first element of the list. * * @param string $key * @return string if command executed successfully BOOL FALSE in case of failure (empty list) * @link http://redis.io/commands/lpop * @example *

     * $redis->rPush('key1', 'A');
     * $redis->rPush('key1', 'B');
     * $redis->rPush('key1', 'C');  // key1 => [ 'A', 'B', 'C' ]
     * $redis->lPop('key1');        // key1 => [ 'B', 'C' ]
     * 

*/ public function lPop( $key ) {} /** * Returns and removes the last element of the list. * * @param string $key * @return string if command executed successfully BOOL FALSE in case of failure (empty list) * @link http://redis.io/commands/rpop * @example *

     * $redis->rPush('key1', 'A');
     * $redis->rPush('key1', 'B');
     * $redis->rPush('key1', 'C');  // key1 => [ 'A', 'B', 'C' ]
     * $redis->rPop('key1');        // key1 => [ 'A', 'B' ]
     * 

*/ public function rPop( $key ) {} /** * Is a blocking lPop primitive. If at least one of the lists contains at least one element, * the element will be popped from the head of the list and returned to the caller. * Il all the list identified by the keys passed in arguments are empty, blPop will block * during the specified timeout until an element is pushed to one of those lists. This element will be popped. * * @param array $keys Array containing the keys of the lists INTEGER Timeout * Or STRING Key1 STRING Key2 STRING Key3 ... STRING Keyn INTEGER Timeout * @return array array('listName', 'element') * @link http://redis.io/commands/blpop * @example *

     * // Non blocking feature
     * $redis->lPush('key1', 'A');
     * $redis->delete('key2');
     *
     * $redis->blPop('key1', 'key2', 10); // array('key1', 'A')
     * // OR
     * $redis->blPop(array('key1', 'key2'), 10); // array('key1', 'A')
     *
     * $redis->brPop('key1', 'key2', 10); // array('key1', 'A')
     * // OR
     * $redis->brPop(array('key1', 'key2'), 10); // array('key1', 'A')
     *
     * // Blocking feature
     *
     * // process 1
     * $redis->delete('key1');
     * $redis->blPop('key1', 10);
     * // blocking for 10 seconds
     *
     * // process 2
     * $redis->lPush('key1', 'A');
     *
     * // process 1
     * // array('key1', 'A') is returned
     * 

*/ public function blPop( array $keys ) {} /** * Is a blocking rPop primitive. If at least one of the lists contains at least one element, * the element will be popped from the head of the list and returned to the caller. * Il all the list identified by the keys passed in arguments are empty, brPop will * block during the specified timeout until an element is pushed to one of those lists. T * his element will be popped. * * @param array $keys Array containing the keys of the lists INTEGER Timeout * Or STRING Key1 STRING Key2 STRING Key3 ... STRING Keyn INTEGER Timeout * @return array array('listName', 'element') * @link http://redis.io/commands/brpop * @example *

     * // Non blocking feature
     * $redis->lPush('key1', 'A');
     * $redis->delete('key2');
     *
     * $redis->blPop('key1', 'key2', 10); // array('key1', 'A')
     * // OR
     * $redis->blPop(array('key1', 'key2'), 10); // array('key1', 'A')
     *
     * $redis->brPop('key1', 'key2', 10); // array('key1', 'A')
     * // OR
     * $redis->brPop(array('key1', 'key2'), 10); // array('key1', 'A')
     *
     * // Blocking feature
     *
     * // process 1
     * $redis->delete('key1');
     * $redis->blPop('key1', 10);
     * // blocking for 10 seconds
     *
     * // process 2
     * $redis->lPush('key1', 'A');
     *
     * // process 1
     * // array('key1', 'A') is returned
     * 

*/ public function brPop( array $keys ) {} /** * Returns the size of a list identified by Key. If the list didn't exist or is empty, * the command returns 0. If the data type identified by Key is not a list, the command return FALSE. * * @param string $key * @return int The size of the list identified by Key exists. * bool FALSE if the data type identified by Key is not list * @link http://redis.io/commands/llen * @example *

     * $redis->rPush('key1', 'A');
     * $redis->rPush('key1', 'B');
     * $redis->rPush('key1', 'C');  // key1 => [ 'A', 'B', 'C' ]
     * $redis->lLen('key1');       // 3
     * $redis->rPop('key1');
     * $redis->lLen('key1');       // 2
     * 

*/ public function lLen( $key ) {} /** * @see lLen() * @param string $key * @param int $index * @link http://redis.io/commands/llen */ public function lSize( $key ) {} /** * Return the specified element of the list stored at the specified key. * 0 the first element, 1 the second ... -1 the last element, -2 the penultimate ... * Return FALSE in case of a bad index or a key that doesn't point to a list. * @param string $key * @param int $index * @return String the element at this index * Bool FALSE if the key identifies a non-string data type, or no value corresponds to this index in the list Key. * @link http://redis.io/commands/lindex * @example *

     * $redis->rPush('key1', 'A');
     * $redis->rPush('key1', 'B');
     * $redis->rPush('key1', 'C');  // key1 => [ 'A', 'B', 'C' ]
     * $redis->lGet('key1', 0);     // 'A'
     * $redis->lGet('key1', -1);    // 'C'
     * $redis->lGet('key1', 10);    // `FALSE`
     * 

*/ public function lIndex( $key, $index ) {} /** * @see lIndex() * @param string $key * @param int $index * @link http://redis.io/commands/lindex */ public function lGet( $key, $index ) {} /** * Set the list at index with the new value. * * @param string $key * @param int $index * @param string $value * @return BOOL TRUE if the new value is setted. FALSE if the index is out of range, or data type identified by key * is not a list. * @link http://redis.io/commands/lset * @example *

     * $redis->rPush('key1', 'A');
     * $redis->rPush('key1', 'B');
     * $redis->rPush('key1', 'C');  // key1 => [ 'A', 'B', 'C' ]
     * $redis->lGet('key1', 0);     // 'A'
     * $redis->lSet('key1', 0, 'X');
     * $redis->lGet('key1', 0);     // 'X'
     * 

*/ public function lSet( $key, $index, $value ) {} /** * Returns the specified elements of the list stored at the specified key in * the range [start, end]. start and stop are interpretated as indices: 0 the first element, * 1 the second ... -1 the last element, -2 the penultimate ... * @param string $key * @param int $start * @param int $end * @return array containing the values in specified range. * @link http://redis.io/commands/lrange * @example *

     * $redis->rPush('key1', 'A');
     * $redis->rPush('key1', 'B');
     * $redis->rPush('key1', 'C');
     * $redis->lRange('key1', 0, -1); // array('A', 'B', 'C')
     * 

*/ public function lRange( $key, $start, $end ) {} /** * @see lRange() * @link http://redis.io/commands/lrange * @param string $key * @param int $start * @param int $end */ public function lGetRange( $key, $start, $end ) {} /** * Trims an existing list so that it will contain only a specified range of elements. * * @param string $key * @param int $start * @param int $stop * @return array Bool return FALSE if the key identify a non-list value. * @link http://redis.io/commands/ltrim * @example *

     * $redis->rPush('key1', 'A');
     * $redis->rPush('key1', 'B');
     * $redis->rPush('key1', 'C');
     * $redis->lRange('key1', 0, -1); // array('A', 'B', 'C')
     * $redis->lTrim('key1', 0, 1);
     * $redis->lRange('key1', 0, -1); // array('A', 'B')
     * 

*/ public function lTrim( $key, $start, $stop ) {} /** * @see lTrim() * @link http://redis.io/commands/ltrim * @param string $key * @param int $start * @param int $stop */ public function listTrim( $key, $start, $stop ) {} /** * Removes the first count occurences of the value element from the list. * If count is zero, all the matching elements are removed. If count is negative, * elements are removed from tail to head. * * @param string $key * @param string $value * @param int $count * @return int the number of elements to remove * bool FALSE if the value identified by key is not a list. * @link http://redis.io/commands/lrem * @example *

     * $redis->lPush('key1', 'A');
     * $redis->lPush('key1', 'B');
     * $redis->lPush('key1', 'C');
     * $redis->lPush('key1', 'A');
     * $redis->lPush('key1', 'A');
     *
     * $redis->lRange('key1', 0, -1);   // array('A', 'A', 'C', 'B', 'A')
     * $redis->lRem('key1', 'A', 2);    // 2
     * $redis->lRange('key1', 0, -1);   // array('C', 'B', 'A')
     * 

*/ public function lRem( $key, $value, $count ) {} /** * @see lRem * @link http://redis.io/commands/lremove * @param string $key * @param string $value * @param int $count */ public function lRemove( $key, $value, $count ) {} /** * Insert value in the list before or after the pivot value. the parameter options * specify the position of the insert (before or after). If the list didn't exists, * or the pivot didn't exists, the value is not inserted. * * @param string $key * @param int $position Redis::BEFORE | Redis::AFTER * @param string $pivot * @param string $value * @return int The number of the elements in the list, -1 if the pivot didn't exists. * @link http://redis.io/commands/linsert * @example *

     * $redis->delete('key1');
     * $redis->lInsert('key1', Redis::AFTER, 'A', 'X');     // 0
     *
     * $redis->lPush('key1', 'A');
     * $redis->lPush('key1', 'B');
     * $redis->lPush('key1', 'C');
     *
     * $redis->lInsert('key1', Redis::BEFORE, 'C', 'X');    // 4
     * $redis->lRange('key1', 0, -1);                       // array('A', 'B', 'X', 'C')
     *
     * $redis->lInsert('key1', Redis::AFTER, 'C', 'Y');     // 5
     * $redis->lRange('key1', 0, -1);                       // array('A', 'B', 'X', 'C', 'Y')
     *
     * $redis->lInsert('key1', Redis::AFTER, 'W', 'value'); // -1
     * 

*/ public function lInsert( $key, $position, $pivot, $value ) {} /** * Adds a values to the set value stored at key. * If this value is already in the set, FALSE is returned. * * @param string $key Required key * @param string $value1 Required value * @param string $value2 Optional value * @param string $valueN Optional value * @return int The number of elements added to the set * @link http://redis.io/commands/sadd * @example *

     * $redis->sAdd('k', 'v1');                // int(1)
     * $redis->sAdd('k', 'v1', 'v2', 'v3');    // int(2)
     * 

*/ public function sAdd( $key, $value1, $value2 = null, $valueN = null ) {} /** * Removes the specified members from the set value stored at key. * * @param string $key * @param string $member1 * @param string $member2 * @param string $memberN * @return int The number of elements removed from the set. * @link http://redis.io/commands/srem * @example *

     * var_dump( $redis->sAdd('k', 'v1', 'v2', 'v3') );    // int(3)
     * var_dump( $redis->sRem('k', 'v2', 'v3') );          // int(2)
     * var_dump( $redis->sMembers('k') );
     * //// Output:
     * // array(1) {
     * //   [0]=> string(2) "v1"
     * // }
     * 

*/ public function sRem( $key, $member1, $member2 = null, $memberN = null ) {} /** * @see sRem() * @link http://redis.io/commands/srem * @param string $key * @param string $member1 * @param string $member2 * @param string $memberN */ public function sRemove( $key, $member1, $member2 = null, $memberN = null ) {} /** * Moves the specified member from the set at srcKey to the set at dstKey. * * @param string $srcKey * @param string $dstKey * @param string $member * @return bool If the operation is successful, return TRUE. * If the srcKey and/or dstKey didn't exist, and/or the member didn't exist in srcKey, FALSE is returned. * @link http://redis.io/commands/smove * @example *

     * $redis->sAdd('key1' , 'set11');
     * $redis->sAdd('key1' , 'set12');
     * $redis->sAdd('key1' , 'set13');          // 'key1' => {'set11', 'set12', 'set13'}
     * $redis->sAdd('key2' , 'set21');
     * $redis->sAdd('key2' , 'set22');          // 'key2' => {'set21', 'set22'}
     * $redis->sMove('key1', 'key2', 'set13');  // 'key1' =>  {'set11', 'set12'}
     *                                          // 'key2' =>  {'set21', 'set22', 'set13'}
     * 

*/ public function sMove( $srcKey, $dstKey, $member ) {} /** * Checks if value is a member of the set stored at the key key. * * @param string $key * @param string $value * @return bool TRUE if value is a member of the set at key key, FALSE otherwise. * @link http://redis.io/commands/sismember * @example *

     * $redis->sAdd('key1' , 'set1');
     * $redis->sAdd('key1' , 'set2');
     * $redis->sAdd('key1' , 'set3'); // 'key1' => {'set1', 'set2', 'set3'}
     *
     * $redis->sIsMember('key1', 'set1'); // TRUE
     * $redis->sIsMember('key1', 'setX'); // FALSE
     * 

*/ public function sIsMember( $key, $value ) {} /** * @see sIsMember() * @link http://redis.io/commands/sismember * @param string $key * @param string $value */ public function sContains( $key, $value ) {} /** * Returns the cardinality of the set identified by key. * * @param string $key * @return int the cardinality of the set identified by key, 0 if the set doesn't exist. * @link http://redis.io/commands/scard * @example *

     * $redis->sAdd('key1' , 'set1');
     * $redis->sAdd('key1' , 'set2');
     * $redis->sAdd('key1' , 'set3');   // 'key1' => {'set1', 'set2', 'set3'}
     * $redis->sCard('key1');           // 3
     * $redis->sCard('keyX');           // 0
     * 

*/ public function sCard( $key ) {} /** * Removes and returns a random element from the set value at Key. * * @param string $key * @return string "popped" value * bool FALSE if set identified by key is empty or doesn't exist. * @link http://redis.io/commands/spop * @example *

     * $redis->sAdd('key1' , 'set1');
     * $redis->sAdd('key1' , 'set2');
     * $redis->sAdd('key1' , 'set3');   // 'key1' => {'set3', 'set1', 'set2'}
     * $redis->sPop('key1');            // 'set1', 'key1' => {'set3', 'set2'}
     * $redis->sPop('key1');            // 'set3', 'key1' => {'set2'}
     * 

*/ public function sPop( $key ) {} /** * Returns a random element from the set value at Key, without removing it. * * @param string $key * @return string value from the set * bool FALSE if set identified by key is empty or doesn't exist. * @link http://redis.io/commands/srandmember * @example *

     * $redis->sAdd('key1' , 'set1');
     * $redis->sAdd('key1' , 'set2');
     * $redis->sAdd('key1' , 'set3');   // 'key1' => {'set3', 'set1', 'set2'}
     * $redis->sRandMember('key1');     // 'set1', 'key1' => {'set3', 'set1', 'set2'}
     * $redis->sRandMember('key1');     // 'set3', 'key1' => {'set3', 'set1', 'set2'}
     * 

*/ public function sRandMember( $key ) {} /** * Returns the members of a set resulting from the intersection of all the sets * held at the specified keys. If just a single key is specified, then this command * produces the members of this set. If one of the keys is missing, FALSE is returned. * * @param string $key1 keys identifying the different sets on which we will apply the intersection. * @param string $key2 ... * @param string $keyN ... * @return array, contain the result of the intersection between those keys. * If the intersection between the different sets is empty, the return value will be empty array. * @link http://redis.io/commands/sinterstore * @example *

     * $redis->sAdd('key1', 'val1');
     * $redis->sAdd('key1', 'val2');
     * $redis->sAdd('key1', 'val3');
     * $redis->sAdd('key1', 'val4');
     *
     * $redis->sAdd('key2', 'val3');
     * $redis->sAdd('key2', 'val4');
     *
     * $redis->sAdd('key3', 'val3');
     * $redis->sAdd('key3', 'val4');
     *
     * var_dump($redis->sInter('key1', 'key2', 'key3'));
     *
     * //array(2) {
     * //  [0]=>
     * //  string(4) "val4"
     * //  [1]=>
     * //  string(4) "val3"
     * //}
     * 

*/ public function sInter( $key1, $key2, $keyN = null ) {} /** * Performs a sInter command and stores the result in a new set. * * @param string $dstKey the key to store the diff into. * @param string $key1 are intersected as in sInter. * @param string $key2 ... * @param string $keyN ... * @return int: The cardinality of the resulting set, or FALSE in case of a missing key. * @link http://redis.io/commands/sinterstore * @example *

     * $redis->sAdd('key1', 'val1');
     * $redis->sAdd('key1', 'val2');
     * $redis->sAdd('key1', 'val3');
     * $redis->sAdd('key1', 'val4');
     *
     * $redis->sAdd('key2', 'val3');
     * $redis->sAdd('key2', 'val4');
     *
     * $redis->sAdd('key3', 'val3');
     * $redis->sAdd('key3', 'val4');
     *
     * var_dump($redis->sInterStore('output', 'key1', 'key2', 'key3'));
     * var_dump($redis->sMembers('output'));
     *
     * //int(2)
     * //
     * //array(2) {
     * //  [0]=>
     * //  string(4) "val4"
     * //  [1]=>
     * //  string(4) "val3"
     * //}
     * 

*/ public function sInterStore( $dstKey, $key1, $key2, $keyN = null ) {} /** * Performs the union between N sets and returns it. * * @param string $key1 Any number of keys corresponding to sets in redis. * @param string $key2 ... * @param string $keyN ... * @return array of strings: The union of all these sets. * @link http://redis.io/commands/sunionstore * @example *

     * $redis->delete('s0', 's1', 's2');
     *
     * $redis->sAdd('s0', '1');
     * $redis->sAdd('s0', '2');
     * $redis->sAdd('s1', '3');
     * $redis->sAdd('s1', '1');
     * $redis->sAdd('s2', '3');
     * $redis->sAdd('s2', '4');
     *
     * var_dump($redis->sUnion('s0', 's1', 's2'));
     *
     * array(4) {
     * //  [0]=>
     * //  string(1) "3"
     * //  [1]=>
     * //  string(1) "4"
     * //  [2]=>
     * //  string(1) "1"
     * //  [3]=>
     * //  string(1) "2"
     * //}
     * 

*/ public function sUnion( $key1, $key2, $keyN = null ) {} /** * Performs the same action as sUnion, but stores the result in the first key * * @param string $dstKey the key to store the diff into. * @param string $key1 Any number of keys corresponding to sets in redis. * @param string $key2 ... * @param string $keyN ... * @return int Any number of keys corresponding to sets in redis. * @link http://redis.io/commands/sunionstore * @example *

     * $redis->delete('s0', 's1', 's2');
     *
     * $redis->sAdd('s0', '1');
     * $redis->sAdd('s0', '2');
     * $redis->sAdd('s1', '3');
     * $redis->sAdd('s1', '1');
     * $redis->sAdd('s2', '3');
     * $redis->sAdd('s2', '4');
     *
     * var_dump($redis->sUnionStore('dst', 's0', 's1', 's2'));
     * var_dump($redis->sMembers('dst'));
     *
     * //int(4)
     * //array(4) {
     * //  [0]=>
     * //  string(1) "3"
     * //  [1]=>
     * //  string(1) "4"
     * //  [2]=>
     * //  string(1) "1"
     * //  [3]=>
     * //  string(1) "2"
     * //}
     * 

*/ public function sUnionStore( $dstKey, $key1, $key2, $keyN = null ) {} /** * Performs the difference between N sets and returns it. * * @param string $key1 Any number of keys corresponding to sets in redis. * @param string $key2 ... * @param string $keyN ... * @return array of strings: The difference of the first set will all the others. * @link http://redis.io/commands/sdiff * @example *

     * $redis->delete('s0', 's1', 's2');
     *
     * $redis->sAdd('s0', '1');
     * $redis->sAdd('s0', '2');
     * $redis->sAdd('s0', '3');
     * $redis->sAdd('s0', '4');
     *
     * $redis->sAdd('s1', '1');
     * $redis->sAdd('s2', '3');
     *
     * var_dump($redis->sDiff('s0', 's1', 's2'));
     *
     * //array(2) {
     * //  [0]=>
     * //  string(1) "4"
     * //  [1]=>
     * //  string(1) "2"
     * //}
     * 

*/ public function sDiff( $key1, $key2, $keyN = null ) {} /** * Performs the same action as sDiff, but stores the result in the first key * * @param string $dstKey the key to store the diff into. * @param string $key1 Any number of keys corresponding to sets in redis * @param string $key2 ... * @param string $keyN ... * @return int: The cardinality of the resulting set, or FALSE in case of a missing key. * @link http://redis.io/commands/sdiffstore * @example *

     * $redis->delete('s0', 's1', 's2');
     *
     * $redis->sAdd('s0', '1');
     * $redis->sAdd('s0', '2');
     * $redis->sAdd('s0', '3');
     * $redis->sAdd('s0', '4');
     *
     * $redis->sAdd('s1', '1');
     * $redis->sAdd('s2', '3');
     *
     * var_dump($redis->sDiffStore('dst', 's0', 's1', 's2'));
     * var_dump($redis->sMembers('dst'));
     *
     * //int(2)
     * //array(2) {
     * //  [0]=>
     * //  string(1) "4"
     * //  [1]=>
     * //  string(1) "2"
     * //}
     * 

*/ public function sDiffStore( $dstKey, $key1, $key2, $keyN = null ) {} /** * Returns the contents of a set. * * @param string $key * @return array An array of elements, the contents of the set. * @link http://redis.io/commands/smembers * @example *

     * $redis->delete('s');
     * $redis->sAdd('s', 'a');
     * $redis->sAdd('s', 'b');
     * $redis->sAdd('s', 'a');
     * $redis->sAdd('s', 'c');
     * var_dump($redis->sMembers('s'));
     *
     * //array(3) {
     * //  [0]=>
     * //  string(1) "c"
     * //  [1]=>
     * //  string(1) "a"
     * //  [2]=>
     * //  string(1) "b"
     * //}
     * // The order is random and corresponds to redis' own internal representation of the set structure.
     * 

*/ public function sMembers( $key ) {} /** * @see sMembers() * @param string $key * @link http://redis.io/commands/smembers */ public function sGetMembers( $key ) {} /** * Sets a value and returns the previous entry at that key. * * @param string $key * @param string $value * @return string A string, the previous value located at this key. * @link http://redis.io/commands/getset * @example *

     * $redis->set('x', '42');
     * $exValue = $redis->getSet('x', 'lol');   // return '42', replaces x by 'lol'
     * $newValue = $redis->get('x')'            // return 'lol'
     * 

*/ public function getSet( $key, $value ) {} /** * Returns a random key. * * @return string: an existing key in redis. * @link http://redis.io/commands/randomkey * @example *

     * $key = $redis->randomKey();
     * $surprise = $redis->get($key);  // who knows what's in there.
     * 

*/ public function randomKey( ) {} /** * Switches to a given database. * * @param int $dbindex * @return bool TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/select * @example *

     * $redis->select(0);       // switch to DB 0
     * $redis->set('x', '42');  // write 42 to x
     * $redis->move('x', 1);    // move to DB 1
     * $redis->select(1);       // switch to DB 1
     * $redis->get('x');        // will return 42
     * 

*/ public function select( $dbindex ) {} /** * Moves a key to a different database. * * @param string $key * @param int $dbindex * @return bool: TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/move * @example *

     * $redis->select(0);       // switch to DB 0
     * $redis->set('x', '42');  // write 42 to x
     * $redis->move('x', 1);    // move to DB 1
     * $redis->select(1);       // switch to DB 1
     * $redis->get('x');        // will return 42
     * 

*/ public function move( $key, $dbindex ) {} /** * Renames a key. * * @param string $srcKey * @param string $dstKey * @return bool: TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/rename * @example *

     * $redis->set('x', '42');
     * $redis->rename('x', 'y');
     * $redis->get('y');   // → 42
     * $redis->get('x');   // → `FALSE`
     * 

*/ public function rename( $srcKey, $dstKey ) {} /** * @see rename() * @link http://redis.io/commands/rename * @param string $srcKey * @param string $dstKey */ public function renameKey( $srcKey, $dstKey ) {} /** * Renames a key. * * Same as rename, but will not replace a key if the destination already exists. * This is the same behaviour as setNx. * * @param string $srcKey * @param string $dstKey * @return bool: TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/renamenx * @example *

     * $redis->set('x', '42');
     * $redis->rename('x', 'y');
     * $redis->get('y');   // → 42
     * $redis->get('x');   // → `FALSE`
     * 

*/ public function renameNx( $srcKey, $dstKey ) {} /** * Sets an expiration date (a timeout) on an item. * * @param string $key The key that will disappear. * @param int $ttl The key's remaining Time To Live, in seconds. * @return bool: TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/expire * @example *

     * $redis->set('x', '42');
     * $redis->setTimeout('x', 3);  // x will disappear in 3 seconds.
     * sleep(5);                    // wait 5 seconds
     * $redis->get('x');            // will return `FALSE`, as 'x' has expired.
     * 

*/ public function expire( $key, $ttl ) {} /** * Sets an expiration date (a timeout in milliseconds) on an item. * * @param string $key The key that will disappear. * @param int $pttl The key's remaining Time To Live, in milliseconds. * @return bool: TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/pexpire * @example *

     * $redis->set('x', '42');
     * $redis->pExpire('x', 11500); // x will disappear in 11500 milliseconds.
     * $redis->ttl('x');            // 12
     * $redis->pttl('x');           // 11500
     * 

*/ public function pExpire( $key, $ttl ) {} /** * @see expire() * @param string $key * @param int $ttl * @link http://redis.io/commands/expire */ public function setTimeout( $key, $ttl ) {} /** * Sets an expiration date (a timestamp) on an item. * * @param string $key The key that will disappear. * @param int $timestamp Unix timestamp. The key's date of death, in seconds from Epoch time. * @return bool: TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/expireat * @example *

     * $redis->set('x', '42');
     * $now = time(NULL);               // current timestamp
     * $redis->expireAt('x', $now + 3); // x will disappear in 3 seconds.
     * sleep(5);                        // wait 5 seconds
     * $redis->get('x');                // will return `FALSE`, as 'x' has expired.
     * 

*/ public function expireAt( $key, $timestamp ) {} /** * Sets an expiration date (a timestamp) on an item. Requires a timestamp in milliseconds * * @param string $key The key that will disappear. * @param int $timestamp Unix timestamp. The key's date of death, in seconds from Epoch time. * @return bool: TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/pexpireat * @example *

     * $redis->set('x', '42');
     * $redis->pExpireAt('x', 1555555555005);
     * echo $redis->ttl('x');                       // 218270121
     * echo $redis->pttl('x');                      // 218270120575
     * 

*/ public function pExpireAt( $key, $timestamp ) {} /** * Returns the keys that match a certain pattern. * * @param string $pattern pattern, using '*' as a wildcard. * @return array of STRING: The keys that match a certain pattern. * @link http://redis.io/commands/keys * @example *

     * $allKeys = $redis->keys('*');   // all keys will match this.
     * $keyWithUserPrefix = $redis->keys('user*');
     * 

*/ public function keys( $pattern ) {} /** * @see keys() * @param string $pattern * @link http://redis.io/commands/keys */ public function getKeys( $pattern ) {} /** * Returns the current database's size. * * @return int: DB size, in number of keys. * @link http://redis.io/commands/dbsize * @example *

     * $count = $redis->dbSize();
     * echo "Redis has $count keys\n";
     * 

*/ public function dbSize( ) {} /** * Authenticate the connection using a password. * Warning: The password is sent in plain-text over the network. * * @param string $password * @return bool: TRUE if the connection is authenticated, FALSE otherwise. * @link http://redis.io/commands/auth * @example $redis->auth('foobared'); */ public function auth( $password ) {} /** * Starts the background rewrite of AOF (Append-Only File) * * @return bool: TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/bgrewriteaof * @example $redis->bgrewriteaof(); */ public function bgrewriteaof( ) {} /** * Changes the slave status * Either host and port, or no parameter to stop being a slave. * * @param string $host [optional] * @param int $port [optional] * @return bool: TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/slaveof * @example *

     * $redis->slaveof('10.0.1.7', 6379);
     * // ...
     * $redis->slaveof();
     * 

*/ public function slaveof( $host = '127.0.0.1', $port = 6379 ) {} /** * Describes the object pointed to by a key. * The information to retrieve (string) and the key (string). * Info can be one of the following: * - "encoding" * - "refcount" * - "idletime" * * @param string $string * @param string $key * @return string for "encoding", int for "refcount" and "idletime", FALSE if the key doesn't exist. * @link http://redis.io/commands/object * @example *

     * $redis->object("encoding", "l"); // → ziplist
     * $redis->object("refcount", "l"); // → 1
     * $redis->object("idletime", "l"); // → 400 (in seconds, with a precision of 10 seconds).
     * 

*/ public function object( $string = '', $key = '' ) {} /** * Performs a synchronous save. * * @return bool: TRUE in case of success, FALSE in case of failure. * If a save is already running, this command will fail and return FALSE. * @link http://redis.io/commands/save * @example $redis->save(); */ public function save( ) {} /** * Performs a background save. * * @return bool: TRUE in case of success, FALSE in case of failure. * If a save is already running, this command will fail and return FALSE. * @link http://redis.io/commands/bgsave * @example $redis->bgSave(); */ public function bgsave( ) {} /** * Returns the timestamp of the last disk save. * * @return int: timestamp. * @link http://redis.io/commands/lastsave * @example $redis->lastSave(); */ public function lastSave( ) {} /** * Returns the type of data pointed by a given key. * * @param string $key * @return int * * Depending on the type of the data pointed by the key, * this method will return the following value: * - string: Redis::REDIS_STRING * - set: Redis::REDIS_SET * - list: Redis::REDIS_LIST * - zset: Redis::REDIS_ZSET * - hash: Redis::REDIS_HASH * - other: Redis::REDIS_NOT_FOUND * @link http://redis.io/commands/type * @example $redis->type('key'); */ public function type( $key ) {} /** * Append specified string to the string stored in specified key. * * @param string $key * @param string $value * @return int: Size of the value after the append * @link http://redis.io/commands/append * @example *

     * $redis->set('key', 'value1');
     * $redis->append('key', 'value2'); // 12
     * $redis->get('key');              // 'value1value2'
     * 

*/ public function append( $key, $value ) {} /** * Return a substring of a larger string * * @param string $key * @param int $start * @param int $end * @return string: the substring * @link http://redis.io/commands/getrange * @example *

     * $redis->set('key', 'string value');
     * $redis->getRange('key', 0, 5);   // 'string'
     * $redis->getRange('key', -5, -1); // 'value'
     * 

*/ public function getRange( $key, $start, $end ) {} /** * Return a substring of a larger string * * @deprecated * @param string $key * @param int $start * @param int $end */ public function substr( $key, $start, $end ) {} /** * Changes a substring of a larger string. * * @param string $key * @param int $offset * @param string $value * @return string: the length of the string after it was modified. * @link http://redis.io/commands/setrange * @example *

     * $redis->set('key', 'Hello world');
     * $redis->setRange('key', 6, "redis"); // returns 11
     * $redis->get('key');                  // "Hello redis"
     * 

*/ public function setRange( $key, $offset, $value ) {} /** * Get the length of a string value. * * @param string $key * @return int * @link http://redis.io/commands/strlen * @example *

     * $redis->set('key', 'value');
     * $redis->strlen('key'); // 5
     * 

*/ public function strlen( $key ) {} /** * Return a single bit out of a larger string * * @param string $key * @param int $offset * @return int: the bit value (0 or 1) * @link http://redis.io/commands/getbit * @example *

     * $redis->set('key', "\x7f");  // this is 0111 1111
     * $redis->getBit('key', 0);    // 0
     * $redis->getBit('key', 1);    // 1
     * 

*/ public function getBit( $key, $offset ) {} /** * Changes a single bit of a string. * * @param string $key * @param int $offset * @param bool|int $value bool or int (1 or 0) * @return int: 0 or 1, the value of the bit before it was set. * @link http://redis.io/commands/setbit * @example *

     * $redis->set('key', "*");     // ord("*") = 42 = 0x2f = "0010 1010"
     * $redis->setBit('key', 5, 1); // returns 0
     * $redis->setBit('key', 7, 1); // returns 0
     * $redis->get('key');          // chr(0x2f) = "/" = b("0010 1111")
     * 

*/ public function setBit( $key, $offset, $value ) {} /** * Count bits in a string. * * @param string $key * @return int The number of bits set to 1 in the value behind the input key. * @link http://redis.io/commands/bitcount * @example *

     * $redis->set('bit', '345'); // // 11 0011  0011 0100  0011 0101
     * var_dump( $redis->bitCount('bit', 0, 0) ); // int(4)
     * var_dump( $redis->bitCount('bit', 1, 1) ); // int(3)
     * var_dump( $redis->bitCount('bit', 2, 2) ); // int(4)
     * var_dump( $redis->bitCount('bit', 0, 2) ); // int(11)
     * 

*/ public function bitCount( $key ) {} /** * Bitwise operation on multiple keys. * * @param string $operation either "AND", "OR", "NOT", "XOR" * @param string $retKey return key * @param string $key1 * @param string $key2 * @return int The size of the string stored in the destination key. * @link http://redis.io/commands/bitop * @example *

     * $redis->set('bit1', '1'); // 11 0001
     * $redis->set('bit2', '2'); // 11 0010
     *
     * $redis->bitOp('AND', 'bit', 'bit1', 'bit2'); // bit = 110000
     * $redis->bitOp('OR',  'bit', 'bit1', 'bit2'); // bit = 110011
     * $redis->bitOp('NOT', 'bit', 'bit1', 'bit2'); // bit = 110011
     * $redis->bitOp('XOR', 'bit', 'bit1', 'bit2'); // bit = 11
     * 

*/ public function bitOp( $operation, $retKey, $key1, $key2, $key3 = null ) {} /** * Removes all entries from the current database. * * @return bool: Always TRUE. * @link http://redis.io/commands/flushdb * @example $redis->flushDB(); */ public function flushDB( ) {} /** * Removes all entries from all databases. * * @return bool: Always TRUE. * @link http://redis.io/commands/flushall * @example $redis->flushAll(); */ public function flushAll( ) {} /** * Sort * * @param string $key * @param array $option array(key => value, ...) - optional, with the following keys and values: * - 'by' => 'some_pattern_*', * - 'limit' => array(0, 1), * - 'get' => 'some_other_pattern_*' or an array of patterns, * - 'sort' => 'asc' or 'desc', * - 'alpha' => TRUE, * - 'store' => 'external-key' * @return array * An array of values, or a number corresponding to the number of elements stored if that was used. * @link http://redis.io/commands/sort * @example *

     * $redis->delete('s');
     * $redis->sadd('s', 5);
     * $redis->sadd('s', 4);
     * $redis->sadd('s', 2);
     * $redis->sadd('s', 1);
     * $redis->sadd('s', 3);
     *
     * var_dump($redis->sort('s')); // 1,2,3,4,5
     * var_dump($redis->sort('s', array('sort' => 'desc'))); // 5,4,3,2,1
     * var_dump($redis->sort('s', array('sort' => 'desc', 'store' => 'out'))); // (int)5
     * 

*/ public function sort( $key, $option = null ) {} /** * Returns an associative array of strings and integers * @param string $option Optional. The option to provide redis. * SERVER | CLIENTS | MEMORY | PERSISTENCE | STATS | REPLICATION | CPU | CLASTER | KEYSPACE | COMANDSTATS * * Returns an associative array of strings and integers, with the following keys: * - redis_version * - redis_git_sha1 * - redis_git_dirty * - arch_bits * - multiplexing_api * - process_id * - uptime_in_seconds * - uptime_in_days * - lru_clock * - used_cpu_sys * - used_cpu_user * - used_cpu_sys_children * - used_cpu_user_children * - connected_clients * - connected_slaves * - client_longest_output_list * - client_biggest_input_buf * - blocked_clients * - used_memory * - used_memory_human * - used_memory_peak * - used_memory_peak_human * - mem_fragmentation_ratio * - mem_allocator * - loading * - aof_enabled * - changes_since_last_save * - bgsave_in_progress * - last_save_time * - total_connections_received * - total_commands_processed * - expired_keys * - evicted_keys * - keyspace_hits * - keyspace_misses * - hash_max_zipmap_entries * - hash_max_zipmap_value * - pubsub_channels * - pubsub_patterns * - latest_fork_usec * - vm_enabled * - role * @link http://redis.io/commands/info * @return string * @example *

     * $redis->info();
     *
     * or
     *
     * $redis->info("COMMANDSTATS"); //Information on the commands that have been run (>=2.6 only)
     * $redis->info("CPU"); // just CPU information from Redis INFO
     * 

*/ public function info( $option = null ) {} /** * Resets the statistics reported by Redis using the INFO command (`info()` function). * These are the counters that are reset: * - Keyspace hits * - Keyspace misses * - Number of commands processed * - Number of connections received * - Number of expired keys * * @return bool: `TRUE` in case of success, `FALSE` in case of failure. * @example $redis->resetStat(); * @link http://redis.io/commands/config-resetstat */ public function resetStat( ) {} /** * Returns the time to live left for a given key, in seconds. If the key doesn't exist, FALSE is returned. * * @param string $key * @return int, the time left to live in seconds. * @link http://redis.io/commands/ttl * @example $redis->ttl('key'); */ public function ttl( $key ) {} /** * Returns a time to live left for a given key, in milliseconds. * * If the key doesn't exist, FALSE is returned. * * @param string $key * @return int the time left to live in milliseconds. * @link http://redis.io/commands/pttl * @example $redis->pttl('key'); */ public function pttl( $key ) {} /** * Remove the expiration timer from a key. * * @param string $key * @return bool: TRUE if a timeout was removed, FALSE if the key didn’t exist or didn’t have an expiration timer. * @link http://redis.io/commands/persist * @example $redis->persist('key'); */ public function persist( $key ) {} /** * Sets multiple key-value pairs in one atomic command. * MSETNX only returns TRUE if all the keys were set (see SETNX). * * @param array(key => value) $array Pairs: array(key => value, ...) * @return bool TRUE in case of success, FALSE in case of failure. * @link http://redis.io/commands/mset * @example *

     * $redis->mset(array('key0' => 'value0', 'key1' => 'value1'));
     * var_dump($redis->get('key0'));
     * var_dump($redis->get('key1'));
     * // Output:
     * // string(6) "value0"
     * // string(6) "value1"
     * 

*/ public function mset( array $array ) {} /** * Returns the values of all specified keys. * * For every key that does not hold a string value or does not exist, * the special value false is returned. Because of this, the operation never fails. * * @param array $array * @return array * @link http://redis.io/commands/mget * @example *

     * $redis->delete('x', 'y', 'z', 'h');    // remove x y z
     * $redis->mset(array('x' => 'a', 'y' => 'b', 'z' => 'c'));
     * $redis->hset('h', 'field', 'value');
     * var_dump($redis->mget(array('x', 'y', 'z', 'h')));
     * // Output:
     * // array(3) {
     * // [0]=>
     * // string(1) "a"
     * // [1]=>
     * // string(1) "b"
     * // [2]=>
     * // string(1) "c"
     * // [3]=>
     * // bool(false)
     * // }
     * 

*/ public function mget( array $array ) {} /** * @see mset() * @param array $array * @return int 1 (if the keys were set) or 0 (no key was set) * @link http://redis.io/commands/msetnx */ public function msetnx( array $array ) {} /** * Pops a value from the tail of a list, and pushes it to the front of another list. * Also return this value. * * @since redis >= 1.1 * @param string $srcKey * @param string $dstKey * @return string The element that was moved in case of success, FALSE in case of failure. * @link http://redis.io/commands/rpoplpush * @example *

     * $redis->delete('x', 'y');
     *
     * $redis->lPush('x', 'abc');
     * $redis->lPush('x', 'def');
     * $redis->lPush('y', '123');
     * $redis->lPush('y', '456');
     *
     * // move the last of x to the front of y.
     * var_dump($redis->rpoplpush('x', 'y'));
     * var_dump($redis->lRange('x', 0, -1));
     * var_dump($redis->lRange('y', 0, -1));
     *
     * //Output:
     * //
     * //string(3) "abc"
     * //array(1) {
     * //  [0]=>
     * //  string(3) "def"
     * //}
     * //array(3) {
     * //  [0]=>
     * //  string(3) "abc"
     * //  [1]=>
     * //  string(3) "456"
     * //  [2]=>
     * //  string(3) "123"
     * //}
     * 

*/ public function rpoplpush( $srcKey, $dstKey ) {} /** * A blocking version of rpoplpush, with an integral timeout in the third parameter. * * @param string $srcKey * @param string $dstKey * @param int $timeout * @return string The element that was moved in case of success, FALSE in case of timeout. * @link http://redis.io/commands/brpoplpush */ public function brpoplpush( $srcKey, $dstKey, $timeout ) {} /** * Adds the specified member with a given score to the sorted set stored at key. * * @param string $key Required key * @param float $score1 Required score * @param string $value1 Required value * @param float $score2 Optional score * @param string $value2 Optional value * @param float $scoreN Optional score * @param string $valueN Optional value * @return int Number of values added * @link http://redis.io/commands/zadd * @example *

     * <pre class="brush:php;toolbar:false">
     * $redis->zAdd(&#39;z&#39;, 1, &#39;v2&#39;, 2, &#39;v2&#39;, 3, &#39;v3&#39;, 4, &#39;v4&#39; );  // int(2)
     * $redis->zRem(&#39;z&#39;, &#39;v2&#39;, &#39;v3&#39;);                           // int(2)
     * var_dump( $redis->zRange(&#39;z&#39;, 0, -1) );
     * //// Output:
     * // array(2) {
     * //   [0]=> string(2) "v1"
     * //   [1]=> string(2) "v4"
     * // }
     * 

* */ public function zAdd( $key, $score1, $value1, $score2 = null, $value2 = null, $scoreN = null, $valueN = null ) {} /** * Returns a range of elements from the ordered set stored at the specified key, * with values in the range [start, end]. start and stop are interpreted as zero-based indices: * 0 the first element, * 1 the second ... * -1 the last element, * -2 the penultimate ... * * @param string $key * @param int $start * @param int $end * @param bool $withscores * @return array Array containing the values in specified range. * @link http://redis.io/commands/zrange * @example *

     * $redis->zAdd('key1', 0, 'val0');
     * $redis->zAdd('key1', 2, 'val2');
     * $redis->zAdd('key1', 10, 'val10');
     * $redis->zRange('key1', 0, -1); // array('val0', 'val2', 'val10')
     * // with scores
     * $redis->zRange('key1', 0, -1, true); // array('val0' => 0, 'val2' => 2, 'val10' => 10)
     * 

*/ public function zRange( $key, $start, $end, $withscores = null ) {} /** * Deletes a specified member from the ordered set. * * @param string $key * @param string $member1 * @param string $member2 * @param string $memberN * @return int Number of deleted values * @link http://redis.io/commands/zrem * @example * <pre class="brush:php;toolbar:false"> * $redis->zAdd(&#39;z&#39;, 1, &#39;v2&#39;, 2, &#39;v2&#39;, 3, &#39;v3&#39;, 4, &#39;v4&#39; ); // int(2) * $redis->zRem(&#39;z&#39;, &#39;v2&#39;, &#39;v3&#39;); // int(2) * var_dump( $redis->zRange(&#39;z&#39;, 0, -1) ); * //// Output: * // array(2) { * // [0]=> string(2) "v1" * // [1]=> string(2) "v4" * // } * */ public function zRem( $key, $member1, $member2 = null, $memberN = null ) {} /** * @see zRem() * @param string $key * @param string $member1 * @param string $member2 * @param string $memberN * @return int Number of deleted values * @link http://redis.io/commands/zrem */ public function zDelete( $key, $member1, $member2 = null, $memberN = null ) {} /** * Returns the elements of the sorted set stored at the specified key in the range [start, end] * in reverse order. start and stop are interpretated as zero-based indices: * 0 the first element, * 1 the second ... * -1 the last element, * -2 the penultimate ... * * @param string $key * @param int $start * @param int $end * @param bool $withscore * @return array Array containing the values in specified range. * @link http://redis.io/commands/zrevrange * @example *

     * $redis->zAdd('key', 0, 'val0');
     * $redis->zAdd('key', 2, 'val2');
     * $redis->zAdd('key', 10, 'val10');
     * $redis->zRevRange('key', 0, -1); // array('val10', 'val2', 'val0')
     *
     * // with scores
     * $redis->zRevRange('key', 0, -1, true); // array('val10' => 10, 'val2' => 2, 'val0' => 0)
     * 

*/ public function zRevRange( $key, $start, $end, $withscore = null ) {} /** * Returns the elements of the sorted set stored at the specified key which have scores in the * range [start,end]. Adding a parenthesis before start or end excludes it from the range. * +inf and -inf are also valid limits. * * zRevRangeByScore returns the same items in reverse order, when the start and end parameters are swapped. * * @param string $key * @param int $start * @param int $end * @param array $options Two options are available: * - withscores => TRUE, * - and limit => array($offset, $count) * @return array Array containing the values in specified range. * @link http://redis.io/commands/zrangebyscore * @example *

     * $redis->zAdd('key', 0, 'val0');
     * $redis->zAdd('key', 2, 'val2');
     * $redis->zAdd('key', 10, 'val10');
     * $redis->zRangeByScore('key', 0, 3);                                          // array('val0', 'val2')
     * $redis->zRangeByScore('key', 0, 3, array('withscores' => TRUE);              // array('val0' => 0, 'val2' => 2)
     * $redis->zRangeByScore('key', 0, 3, array('limit' => array(1, 1));                        // array('val2' => 2)
     * $redis->zRangeByScore('key', 0, 3, array('limit' => array(1, 1));                        // array('val2')
     * $redis->zRangeByScore('key', 0, 3, array('withscores' => TRUE, 'limit' => array(1, 1));  // array('val2' => 2)
     * 

*/ public function zRangeByScore( $key, $start, $end, array $options = array() ) {} /** * @see zRangeByScore() * @param string $key * @param int $start * @param int $end * @param array $options * * @return array */ public function zRevRangeByScore( $key, $start, $end, array $options = array() ) {} /** * Returns the number of elements of the sorted set stored at the specified key which have * scores in the range [start,end]. Adding a parenthesis before start or end excludes it * from the range. +inf and -inf are also valid limits. * * @param string $key * @param string $start * @param string $end * @return int the size of a corresponding zRangeByScore. * @link http://redis.io/commands/zcount * @example *

     * $redis->zAdd('key', 0, 'val0');
     * $redis->zAdd('key', 2, 'val2');
     * $redis->zAdd('key', 10, 'val10');
     * $redis->zCount('key', 0, 3); // 2, corresponding to array('val0', 'val2')
     * 

*/ public function zCount( $key, $start, $end ) {} /** * Deletes the elements of the sorted set stored at the specified key which have scores in the range [start,end]. * * @param string $key * @param float|string $start double or "+inf" or "-inf" string * @param float|string $end double or "+inf" or "-inf" string * @return int The number of values deleted from the sorted set * @link http://redis.io/commands/zremrangebyscore * @example *

     * $redis->zAdd('key', 0, 'val0');
     * $redis->zAdd('key', 2, 'val2');
     * $redis->zAdd('key', 10, 'val10');
     * $redis->zRemRangeByScore('key', 0, 3); // 2
     * 

*/ public function zRemRangeByScore( $key, $start, $end ) {} /** * @see zRemRangeByScore() * @param string $key * @param float $start * @param float $end */ public function zDeleteRangeByScore( $key, $start, $end ) {} /** * Deletes the elements of the sorted set stored at the specified key which have rank in the range [start,end]. * * @param string $key * @param int $start * @param int $end * @return int The number of values deleted from the sorted set * @link http://redis.io/commands/zremrangebyrank * @example *

     * $redis->zAdd('key', 1, 'one');
     * $redis->zAdd('key', 2, 'two');
     * $redis->zAdd('key', 3, 'three');
     * $redis->zRemRangeByRank('key', 0, 1); // 2
     * $redis->zRange('key', 0, -1, array('withscores' => TRUE)); // array('three' => 3)
     * 

*/ public function zRemRangeByRank( $key, $start, $end ) {} /** * @see zRemRangeByRank() * @param string $key * @param int $start * @param int $end * @link http://redis.io/commands/zremrangebyscore */ public function zDeleteRangeByRank( $key, $start, $end ) {} /** * Returns the cardinality of an ordered set. * * @param string $key * @return int the set's cardinality * @link http://redis.io/commands/zsize * @example *

     * $redis->zAdd('key', 0, 'val0');
     * $redis->zAdd('key', 2, 'val2');
     * $redis->zAdd('key', 10, 'val10');
     * $redis->zCard('key');            // 3
     * 

*/ public function zCard( $key ) {} /** * @see zCard() * @param string $key */ public function zSize( $key ) {} /** * Returns the score of a given member in the specified sorted set. * * @param string $key * @param string $member * @return float * @link http://redis.io/commands/zscore * @example *

     * $redis->zAdd('key', 2.5, 'val2');
     * $redis->zScore('key', 'val2'); // 2.5
     * 

*/ public function zScore( $key, $member ) {} /** * Returns the rank of a given member in the specified sorted set, starting at 0 for the item * with the smallest score. zRevRank starts at 0 for the item with the largest score. * * @param string $key * @param string $member * @return int the item's score. * @link http://redis.io/commands/zrank * @example *

     * $redis->delete('z');
     * $redis->zAdd('key', 1, 'one');
     * $redis->zAdd('key', 2, 'two');
     * $redis->zRank('key', 'one');     // 0
     * $redis->zRank('key', 'two');     // 1
     * $redis->zRevRank('key', 'one');  // 1
     * $redis->zRevRank('key', 'two');  // 0
     * 

*/ public function zRank( $key, $member ) {} /** * @see zRank() * @param string $key * @param string $member * @return int the item's score * @link http://redis.io/commands/zrevrank */ public function zRevRank( $key, $member ) {} /** * Increments the score of a member from a sorted set by a given amount. * * @param string $key * @param float $value (double) value that will be added to the member's score * @param string $member * @return float the new value * @link http://redis.io/commands/zincrby * @example *

     * $redis->delete('key');
     * $redis->zIncrBy('key', 2.5, 'member1');  // key or member1 didn't exist, so member1's score is to 0
     *                                          // before the increment and now has the value 2.5
     * $redis->zIncrBy('key', 1, 'member1');    // 3.5
     * 

*/ public function zIncrBy( $key, $value, $member ) {} /** * Creates an union of sorted sets given in second argument. * The result of the union will be stored in the sorted set defined by the first argument. * The third optionnel argument defines weights to apply to the sorted sets in input. * In this case, the weights will be multiplied by the score of each element in the sorted set * before applying the aggregation. The forth argument defines the AGGREGATE option which * specify how the results of the union are aggregated. * * @param string $Output * @param array $ZSetKeys * @param array $Weights * @param string $aggregateFunction Either "SUM", "MIN", or "MAX": defines the behaviour to use on * duplicate entries during the zUnion. * @return int The number of values in the new sorted set. * @link http://redis.io/commands/zunionstore * @example *

     * $redis->delete('k1');
     * $redis->delete('k2');
     * $redis->delete('k3');
     * $redis->delete('ko1');
     * $redis->delete('ko2');
     * $redis->delete('ko3');
     *
     * $redis->zAdd('k1', 0, 'val0');
     * $redis->zAdd('k1', 1, 'val1');
     *
     * $redis->zAdd('k2', 2, 'val2');
     * $redis->zAdd('k2', 3, 'val3');
     *
     * $redis->zUnion('ko1', array('k1', 'k2')); // 4, 'ko1' => array('val0', 'val1', 'val2', 'val3')
     *
     * // Weighted zUnion
     * $redis->zUnion('ko2', array('k1', 'k2'), array(1, 1)); // 4, 'ko2' => array('val0', 'val1', 'val2', 'val3')
     * $redis->zUnion('ko3', array('k1', 'k2'), array(5, 1)); // 4, 'ko3' => array('val0', 'val2', 'val3', 'val1')
     * 

*/ public function zUnion($Output, $ZSetKeys, array $Weights = null, $aggregateFunction = 'SUM') {} /** * Creates an intersection of sorted sets given in second argument. * The result of the union will be stored in the sorted set defined by the first argument. * The third optional argument defines weights to apply to the sorted sets in input. * In this case, the weights will be multiplied by the score of each element in the sorted set * before applying the aggregation. The forth argument defines the AGGREGATE option which * specify how the results of the union are aggregated. * * @param string $Output * @param array $ZSetKeys * @param array $Weights * @param string $aggregateFunction Either "SUM", "MIN", or "MAX": * defines the behaviour to use on duplicate entries during the zInter. * @return int The number of values in the new sorted set. * @link http://redis.io/commands/zinterstore * @example *

     * $redis->delete('k1');
     * $redis->delete('k2');
     * $redis->delete('k3');
     *
     * $redis->delete('ko1');
     * $redis->delete('ko2');
     * $redis->delete('ko3');
     * $redis->delete('ko4');
     *
     * $redis->zAdd('k1', 0, 'val0');
     * $redis->zAdd('k1', 1, 'val1');
     * $redis->zAdd('k1', 3, 'val3');
     *
     * $redis->zAdd('k2', 2, 'val1');
     * $redis->zAdd('k2', 3, 'val3');
     *
     * $redis->zInter('ko1', array('k1', 'k2'));               // 2, 'ko1' => array('val1', 'val3')
     * $redis->zInter('ko2', array('k1', 'k2'), array(1, 1));  // 2, 'ko2' => array('val1', 'val3')
     *
     * // Weighted zInter
     * $redis->zInter('ko3', array('k1', 'k2'), array(1, 5), 'min'); // 2, 'ko3' => array('val1', 'val3')
     * $redis->zInter('ko4', array('k1', 'k2'), array(1, 5), 'max'); // 2, 'ko4' => array('val3', 'val1')
     * 

*/ public function zInter($Output, $ZSetKeys, array $Weights = null, $aggregateFunction = 'SUM') {} /** * Adds a value to the hash stored at key. If this value is already in the hash, FALSE is returned. * * @param string $key * @param string $hashKey * @param string $value * @return int * 1 if value didn't exist and was added successfully, * 0 if the value was already present and was replaced, FALSE if there was an error. * @link http://redis.io/commands/hset * @example *

     * $redis->delete('h')
     * $redis->hSet('h', 'key1', 'hello');  // 1, 'key1' => 'hello' in the hash at "h"
     * $redis->hGet('h', 'key1');           // returns "hello"
     *
     * $redis->hSet('h', 'key1', 'plop');   // 0, value was replaced.
     * $redis->hGet('h', 'key1');           // returns "plop"
     * 

*/ public function hSet( $key, $hashKey, $value ) {} /** * Adds a value to the hash stored at key only if this field isn't already in the hash. * * @param string $key * @param string $hashKey * @param string $value * @return bool TRUE if the field was set, FALSE if it was already present. * @link http://redis.io/commands/hsetnx * @example *

     * $redis->delete('h')
     * $redis->hSetNx('h', 'key1', 'hello'); // TRUE, 'key1' => 'hello' in the hash at "h"
     * $redis->hSetNx('h', 'key1', 'world'); // FALSE, 'key1' => 'hello' in the hash at "h". No change since the field
     * wasn't replaced.
     * 

*/ public function hSetNx( $key, $hashKey, $value ) {} /** * Gets a value from the hash stored at key. * If the hash table doesn't exist, or the key doesn't exist, FALSE is returned. * * @param string $key * @param string $hashKey * @return string The value, if the command executed successfully BOOL FALSE in case of failure * @link http://redis.io/commands/hget */ public function hGet($key, $hashKey) {} /** * Returns the length of a hash, in number of items * * @param string $key * @return int the number of items in a hash, FALSE if the key doesn't exist or isn't a hash. * @link http://redis.io/commands/hlen * @example *

     * $redis->delete('h')
     * $redis->hSet('h', 'key1', 'hello');
     * $redis->hSet('h', 'key2', 'plop');
     * $redis->hLen('h'); // returns 2
     * 

*/ public function hLen( $key ) {} /** * Removes a values from the hash stored at key. * If the hash table doesn't exist, or the key doesn't exist, FALSE is returned. * * @param string $key * @param string $hashKey1 * @param string $hashKey2 * @param string $hashKeyN * @return int Number of deleted fields * @link http://redis.io/commands/hdel * @example *

     * $redis->hMSet('h',
     *               array(
     *                    'f1' => 'v1',
     *                    'f2' => 'v2',
     *                    'f3' => 'v3',
     *                    'f4' => 'v4',
     *               ));
     *
     * var_dump( $redis->hDel('h', 'f1') );        // int(1)
     * var_dump( $redis->hDel('h', 'f2', 'f3') );  // int(2)
     * s
     * var_dump( $redis->hGetAll('h') );
     * //// Output:
     * //  array(1) {
     * //    ["f4"]=> string(2) "v4"
     * //  }
     * 

*/ public function hDel( $key, $hashKey1, $hashKey2 = null, $hashKeyN = null ) {} /** * Returns the keys in a hash, as an array of strings. * * @param string $key * @return array An array of elements, the keys of the hash. This works like PHP's array_keys(). * @link http://redis.io/commands/hkeys * @example *

     * $redis->delete('h');
     * $redis->hSet('h', 'a', 'x');
     * $redis->hSet('h', 'b', 'y');
     * $redis->hSet('h', 'c', 'z');
     * $redis->hSet('h', 'd', 't');
     * var_dump($redis->hKeys('h'));
     *
     * // Output:
     * // array(4) {
     * // [0]=>
     * // string(1) "a"
     * // [1]=>
     * // string(1) "b"
     * // [2]=>
     * // string(1) "c"
     * // [3]=>
     * // string(1) "d"
     * // }
     * // The order is random and corresponds to redis' own internal representation of the set structure.
     * 

*/ public function hKeys( $key ) {} /** * Returns the values in a hash, as an array of strings. * * @param string $key * @return array An array of elements, the values of the hash. This works like PHP's array_values(). * @link http://redis.io/commands/hvals * @example *

     * $redis->delete('h');
     * $redis->hSet('h', 'a', 'x');
     * $redis->hSet('h', 'b', 'y');
     * $redis->hSet('h', 'c', 'z');
     * $redis->hSet('h', 'd', 't');
     * var_dump($redis->hVals('h'));
     *
     * // Output
     * // array(4) {
     * //   [0]=>
     * //   string(1) "x"
     * //   [1]=>
     * //   string(1) "y"
     * //   [2]=>
     * //   string(1) "z"
     * //   [3]=>
     * //   string(1) "t"
     * // }
     * // The order is random and corresponds to redis' own internal representation of the set structure.
     * 

*/ public function hVals( $key ) {} /** * Returns the whole hash, as an array of strings indexed by strings. * * @param string $key * @return array An array of elements, the contents of the hash. * @link http://redis.io/commands/hgetall * @example *

     * $redis->delete('h');
     * $redis->hSet('h', 'a', 'x');
     * $redis->hSet('h', 'b', 'y');
     * $redis->hSet('h', 'c', 'z');
     * $redis->hSet('h', 'd', 't');
     * var_dump($redis->hGetAll('h'));
     *
     * // Output:
     * // array(4) {
     * //   ["a"]=>
     * //   string(1) "x"
     * //   ["b"]=>
     * //   string(1) "y"
     * //   ["c"]=>
     * //   string(1) "z"
     * //   ["d"]=>
     * //   string(1) "t"
     * // }
     * // The order is random and corresponds to redis' own internal representation of the set structure.
     * 

*/ public function hGetAll( $key ) {} /** * Verify if the specified member exists in a key. * * @param string $key * @param string $hashKey * @return bool: If the member exists in the hash table, return TRUE, otherwise return FALSE. * @link http://redis.io/commands/hexists * @example *

     * $redis->hSet('h', 'a', 'x');
     * $redis->hExists('h', 'a');               //  TRUE
     * $redis->hExists('h', 'NonExistingKey');  // FALSE
     * 

*/ public function hExists( $key, $hashKey ) {} /** * Increments the value of a member from a hash by a given amount. * * @param string $key * @param string $hashKey * @param int $value (integer) value that will be added to the member's value * @return int the new value * @link http://redis.io/commands/hincrby * @example *

     * $redis->delete('h');
     * $redis->hIncrBy('h', 'x', 2); // returns 2: h[x] = 2 now.
     * $redis->hIncrBy('h', 'x', 1); // h[x] ← 2 + 1. Returns 3
     * 

*/ public function hIncrBy( $key, $hashKey, $value ) {} /** * Increment the float value of a hash field by the given amount * @param string $key * @param string $field * @param float $increment * @return float * @link http://redis.io/commands/hincrbyfloat * @example *

     * $redis = new Redis();
     * $redis->connect('127.0.0.1');
     * $redis->hset('h', 'float', 3);
     * $redis->hset('h', 'int',   3);
     * var_dump( $redis->hIncrByFloat('h', 'float', 1.5) ); // float(4.5)
     *
     * var_dump( $redis->hGetAll('h') );
     *
     * // Output
     *  array(2) {
     *    ["float"]=>
     *    string(3) "4.5"
     *    ["int"]=>
     *    string(1) "3"
     *  }
     * 

*/ public function hIncrByFloat( $key, $field, $increment ) {} /** * Fills in a whole hash. Non-string values are converted to string, using the standard (string) cast. * NULL values are stored as empty strings * * @param string $key * @param array $hashKeys key → value array * @return bool * @link http://redis.io/commands/hmset * @example *

     * $redis->delete('user:1');
     * $redis->hMset('user:1', array('name' => 'Joe', 'salary' => 2000));
     * $redis->hIncrBy('user:1', 'salary', 100); // Joe earns 100 more now.
     * 

*/ public function hMset( $key, $hashKeys ) {} /** * Retirieve the values associated to the specified fields in the hash. * * @param string $key * @param array $hashKeys * @return array Array An array of elements, the values of the specified fields in the hash, * with the hash keys as array keys. * @link http://redis.io/commands/hmget * @example *

     * $redis->delete('h');
     * $redis->hSet('h', 'field1', 'value1');
     * $redis->hSet('h', 'field2', 'value2');
     * $redis->hmGet('h', array('field1', 'field2')); // returns array('field1' => 'value1', 'field2' => 'value2')
     * 

*/ public function hMGet( $key, $hashKeys ) {} /** * Get or Set the redis config keys. * * @param string $operation either `GET` or `SET` * @param string $key for `SET`, glob-pattern for `GET`. See http://redis.io/commands/config-get for examples. * @param string $value optional string (only for `SET`) * @return array Associative array for `GET`, key -> value * @link http://redis.io/commands/config-get * @link http://redis.io/commands/config-set * @example *

     * $redis->config("GET", "*max-*-entries*");
     * $redis->config("SET", "dir", "/var/run/redis/dumps/");
     * 

*/ public function config( $operation, $key, $value ) {} /** * @see eval() * @param string $script * @param array $args * @param int $numKeys */ public function evaluate( $script, $args = array(), $numKeys = 0 ) {} /** * Evaluate a LUA script serverside, from the SHA1 hash of the script instead of the script itself. * In order to run this command Redis will have to have already loaded the script, either by running it or via * the SCRIPT LOAD command. * @param string $scriptSha * @param array $args * @param int $numKeys * @return mixed. @see eval() * @see eval() * @link http://redis.io/commands/evalsha * @example *

     * $script = 'return 1';
     * $sha = $redis->script('load', $script);
     * $redis->evalSha($sha); // Returns 1
     * 

*/ public function evalSha( $scriptSha, $args = array(), $numKeys = 0 ) {} /** * @see evalSha() * @param string $scriptSha * @param array $args * @param int $numKeys */ public function evaluateSha( $scriptSha, $args = array(), $numKeys = 0 ) {} /** * Execute the Redis SCRIPT command to perform various operations on the scripting subsystem. * @param string $command load | flush | kill | exists * @param string $script * @return mixed * @link http://redis.io/commands/script-load * @link http://redis.io/commands/script-kill * @link http://redis.io/commands/script-flush * @link http://redis.io/commands/script-exists * @example *

     * $redis->script('load', $script);
     * $redis->script('flush');
     * $redis->script('kill');
     * $redis->script('exists', $script1, [$script2, $script3, ...]);
     * 

* * SCRIPT LOAD will return the SHA1 hash of the passed script on success, and FALSE on failure. * SCRIPT FLUSH should always return TRUE * SCRIPT KILL will return true if a script was able to be killed and false if not * SCRIPT EXISTS will return an array with TRUE or FALSE for each passed script */ public function script( $command, $script ) {} /** * The last error message (if any) * @return string A string with the last returned script based error message, or NULL if there is no error * @example *

     * $redis->eval('this-is-not-lua');
     * $err = $redis->getLastError();
     * // "ERR Error compiling script (new function): user_script:1: '=' expected near '-'"
     * 

*/ public function getLastError() {} /** * Clear the last error message * * @return bool true * @example *

     * $redis->set('x', 'a');
     * $redis->incr('x');
     * $err = $redis->getLastError();
     * // "ERR value is not an integer or out of range"
     * $redis->clearLastError();
     * $err = $redis->getLastError();
     * // NULL
     * 

*/ public function clearLastError() {} /** * A utility method to prefix the value with the prefix setting for phpredis. * @param $value The value you wish to prefix * @return string If a prefix is set up, the value now prefixed. If there is no prefix, the value will be returned unchanged. * @example *

     * $redis->setOption(Redis::OPT_PREFIX, 'my-prefix:');
     * $redis->_prefix('my-value'); // Will return 'my-prefix:my-value'
     * 

*/ public function _prefix( $value ) {} /** * A utility method to unserialize data with whatever serializer is set up. If there is no serializer set, the * value will be returned unchanged. If there is a serializer set up, and the data passed in is malformed, an * exception will be thrown. This can be useful if phpredis is serializing values, and you return something from * redis in a LUA script that is serialized. * @param string $value The value to be unserialized * @return mixed * @example *

     * $redis->setOption(Redis::OPT_SERIALIZER, Redis::SERIALIZER_PHP);
     * $redis->_unserialize('a:3:{i:0;i:1;i:1;i:2;i:2;i:3;}'); // Will return Array(1,2,3)
     * 

*/ public function _unserialize( $value ) {} /** * Dump a key out of a redis database, the value of which can later be passed into redis using the RESTORE command. * The data that comes out of DUMP is a binary representation of the key as Redis stores it. * @param string $key * @return string The Redis encoded value of the key, or FALSE if the key doesn't exist * @link http://redis.io/commands/dump * @example *

     * $redis->set('foo', 'bar');
     * $val = $redis->dump('foo'); // $val will be the Redis encoded key value
     * 

*/ public function dump( $key ) {} /** * Restore a key from the result of a DUMP operation. * * @param string $key The key name * @param int $ttl How long the key should live (if zero, no expire will be set on the key) * @param string $value (binary). The Redis encoded key value (from DUMP) * @return bool * @link http://redis.io/commands/restore * @example *

     * $redis->set('foo', 'bar');
     * $val = $redis->dump('foo');
     * $redis->restore('bar', 0, $val); // The key 'bar', will now be equal to the key 'foo'
     * 

*/ public function restore( $key, $ttl, $value ) {} /** * Migrates a key to a different Redis instance. * * @param string $host The destination host * @param int $port The TCP port to connect to. * @param string $key The key to migrate. * @param int $db The target DB. * @param int $timeout The maximum amount of time given to this transfer. * @return bool * @link http://redis.io/commands/migrate * @example *

     * $redis->migrate('backup', 6379, 'foo', 0, 3600);
     * 

*/ public function migrate( $host, $port, $key, $db, $timeout ) {} /** * Return the current Redis server time. * @return array If successfull, the time will come back as an associative array with element zero being the * unix timestamp, and element one being microseconds. * @link http://redis.io/commands/time *

     * var_dump( $redis->time() );
     * // array(2) {
     * //   [0] => string(10) "1342364352"
     * //   [1] => string(6) "253002"
     * // }
     * 

*/ public function time() {} } class RedisException extends Exception {} class RedisArray { /** * Constructor * * @param string $name Name of the redis array to create (required if using redis.ini to define array) * @param array $hosts Array of hosts to construct the array with * @param array $opts Array of options * @link https://github.com/nicolasff/phpredis/blob/master/arrays.markdown */ function __construct($name = '', array $hosts = NULL, array $opts = NULL) {} /** * @return array list of hosts for the selected array */ public function _hosts() {} /** * @return string the name of the function used to extract key parts during consistent hashing */ public function _function() {} /** * @param string key The key for which you want to lookup the host * @return string the host to be used for a certain key */ public function _target($key) {} /** * Use this function when a new node is added and keys need to be rehashed. */ public function _rehash() {} }

The above is the detailed content of PHP implementation in common redis usage scenarios. For more information, please follow other related articles on the PHP Chinese website!