search
Homephp教程php手册php 仿asp xmlhttprequest请求数据代码

类名 :httprequest($url="",$method="get",$usesocket=0)
//$url为请求的地址;默认请求方法为get;$usesocket默认为0,使用fsockopen方法,如果设置为1则使用socket_create方法

方法:
open($ip="",$port=-1) //打开同服务器的连接,默认不用设置这两个参数(一个同事在linux用的时候,请求的不是hostname解析的ip,因此加了这两个参数,以连接真实的服务器ip)
settimeout($timeout=0) //设置获取数据的超时时间,必须在send方法调用之前设置才有效,单位秒,默认值0为不限制
setrequestheader($key,$value="") //设置请求头,必须在send方法调用之前设置才有效
removerequestheader($key,$value="") //移除指定键值的请求头,必须在send方法调用之前调用才有效
send($data="") //发送数据$data到服务器
getresponsebody() //获取服务器返回的文本
getallresponseheaders() //获取服务器响应的所有头信息
getresponseheader($key) //获取服务器响应的某个头信息,例如server,set_cookie等

属性:
$url //要请求的url
$method //请求方法(post/get)
$port //请求的端口
$hostname //请求的主机名
$uri //url的文件部分
$protocol //请求协议(http)(包括本属性的以上5个属性均由程序自动通过url分析)
$excption //异常信息
$_headers=array() //请求头array("key"=>"value")
$_senddata //发送到服务器的数据
$status //返回的状态码
$statustext //状态信息
$httpprotocolversion //服务器的http协议版本

注意:
host头由程序自动设置,当用post方法请求时,content-length和content-type已被自动设置。
支持gzip压缩的页面

inc.http.php教程文件

class httprequest{
 public $url,$method,$port,$hostname,$uri,$protocol,$excption,$_headers=array(),$_senddata,$status,$statustext,$httpprotocolversion;
 private $fp=0,$_buffer="",$responsebody,$responseheader,$timeout=0,$usesocket;
 //构造函数
 function __construct($url="",$method="get",$usesocket=0){
  $this->url = $url;
  $this->method = strtoupper($method);
  $this->usesocket = $usesocket;
  $this->setrequestheader("accept","*/*");
  $this->setrequestheader("accept-language","zh-cn");
  $this->setrequestheader("accept-encoding","gzip, deflate");
  $this->setrequestheader("user-agent","httprequest class 1.0");  //可调用setrequestheader来修改
 }
 
 //连接服务器
 public function open($ip="",$port=-1){
  if(!$this->_geturlinfo()) return false;
  $this->setrequestheader("host",$this->hostname);
  $this->setrequestheader("connection","close");
  $ip = ($ip=="" ? $this->hostname : $ip);
  $port = ($port==-1 ? $this->port : $port);
  if($this->usesocket==1){
   if(!$this->fp=$socket=socket_create(af_inet,sock_stream,0)) {
    $this->excption="can not create socket";return false;
   }else{
    if(!socket_connect($this->fp,$ip, $port) ){
     $this->excption="can not connect to server " . $this->hostname . " on port" . $this->port;return false;
    }
   }
  }else{
   if(!$this->fp=fsockopen($ip, $port,$errno,$errstr,10)) {
    $this->excption="can not connect to server " . $this->hostname . " on port" . $this->port;return false;
   }
  }
  return true;
 }
 
 public function send($data=""){
  if(!$this->fp){$this->excption="is not a resource id";return false;}
  if($this->method=="get" && $data!=""){
   $s_str="?";
   if(strpos($this->uri,"?")>0) $s_str = "&";
   $this->uri.= $s_str . $data;
   $data="";
  }
  $senddata=$this->method . " " . $this->uri . " http/1.1rn";
  if($this->method=="post"){
   $this->setrequestheader("content-length",strlen($data));
   $this->setrequestheader("content-type", "application/x-www-form-urlencoded");
  }
  foreach($this->_headers as $keys => $value){
   $senddata .= "$keys: $valuern";
  }
  $senddata .= "rn";
  if($this->method=="post") $senddata .= $data;
  $this->_senddata = $senddata;
  if($this->usesocket==1){
   socket_write($this->fp,$this->_senddata);
   $buffer="";
   $timestart = time();
   do{
    if($this->timeout>0){
     if(time()-$timestart>$this->timeout){break;}
    }
    $this->_buffer.=$buffer;
    $buffer = socket_read($this->fp,4096);
   }while($buffer!="");
   socket_close($this->fp); 
  }else{
   fputs($this->fp, $senddata);
   $this->_buffer="";
   $timestart = time();
   while(!feof($this->fp))
   {
    if($this->timeout>0){
     if(time()-$timestart>$this->timeout){break;}
    }
    $this->_buffer.=fgets($this->fp,4096);
   }
   fclose($this->fp);   
  }
  $this->_splitcontent();
  $this->_getheaderinfo();
 }
 
 public function getresponsebody(){
  if($this->getresponseheader("content-encoding")=="gzip" && $this->getresponseheader("transfer-encoding")=="chunked"){
   return gzdecode_1(transfer_encoding_chunked_decode($this->responsebody));
  }else if($this->getresponseheader("content-encoding")=="gzip"){
   return gzdecode_1($this->responsebody);
  }else{
   return $this->responsebody;
  }
 }
 
 public function getallresponseheaders(){
  return  $this->responseheader;
 }
 
 public function getresponseheader($key){
  $key = str_replace("-","-",$key);
  $headerstr = $this->responseheader . "rn";
  $count = preg_match_all("/n$key:(.+?)r/is",$headerstr,$result,preg_set_order);
  if($count>0){
   $returnstr="";
   foreach($result as $key1=>$value){
    if(strtoupper($key)=="set-cookie"){
     $value[1] = substr($value[1],0,strpos($value[1],";"));
    }
    $returnstr .= ltrim($value[1]) . "; ";
   }
   $returnstr = substr($returnstr,0,strlen($returnstr)-2);
   return $returnstr;
  }else{return "";}
 }
 
 public function settimeout($timeout=0){
  $this->timeout = $timeout; 
 }
 
 public function setrequestheader($key,$value=""){
  $this->_headers[$key]=$value;
 }
 
 public function removerequestheader($key){
  if(count($this->_headers)==0){return;}
  $_temp=array();
  foreach($this->_headers as $keys => $value){
   if($keys!=$key){
    $_temp[$keys]=$value;
   }
  }
  $this->_headers = $_temp;
 }
 
 //拆分url
 private function _geturlinfo(){
  $url = $this->url;
  $count = preg_match("/^http://([^:/]+?)(:(d+))?/(.+?)$/is",$url,$result);
  if($count>0){
   $this->uri="/" . $result[4];
  }else{
   $count = preg_match("/^http://([^:/]+?)(:(d+))?(/)?$/is",$url,$result);
   if($count>0){
    $this->uri="/";
   }
  }
  if($count>0){
   $this->protocol="http";
   $this->hostname=$result[1];
   if(isset($result[2]) && $result[2]!="") {$this->port=intval($result[3]);}else{$this->port=80;}
   return true;
  }else{$this->excption="url format error";return false;}
 }
 
 private function _splitcontent(){
  $this->responseheader="";
  $this->responsebody="";
  $p1 = strpos($this->_buffer,"rnrn");
  if($p1>0){
   $this->responseheader = substr($this->_buffer,0,$p1);
   if($p1+4_buffer)){
    $this->responsebody = substr($this->_buffer,$p1+4);
   }
  }
 }
 
 private function _getheaderinfo(){
  $headerstr = $this->responseheader;
  $count = preg_match("/^http/(.+?)s(d+)s(.+?)rn/is",$headerstr,$result);
  if($count>0){
   $this->httpprotocolversion = $result[1];
   $this->status = intval($result[2]);
   $this->statustext = $result[3];
  }
 }
}


//以下两函数参考网络
function gzdecode_1 ($data) {
 $data = ($data);
 if (!function_exists ( 'gzdecode' )) {
  $flags = ord ( substr ( $data, 3, 1 ) );
  $headerlen = 10;
  $extralen = 0;
  $filenamelen = 0;
  if ($flags & 4) {
   $extralen = unpack ( 'v', substr ( $data, 10, 2 ) );
   $extralen = $extralen [1];
   $headerlen += 2 + $extralen;
  }
  if ($flags & 8) // filename
   $headerlen = strpos ( $data, chr ( 0 ), $headerlen ) + 1;
  if ($flags & 16) // comment
   $headerlen = strpos ( $data, chr ( 0 ), $headerlen ) + 1;
  if ($flags & 2) // crc at end of file
   $headerlen += 2;
  $unpacked = @gzinflate ( substr ( $data, $headerlen ) );
  if ($unpacked === false)
   $unpacked = $data;
  return $unpacked;
 }else{
  return gzdecode($data);
 }
}

function transfer_encoding_chunked_decode($in) {
 $out = "";
 while ( $in !="") {
  $lf_pos = strpos ( $in, "12" );
  if ($lf_pos === false) {
   $out .= $in;
   break;
  }
  $chunk_hex = trim ( substr ( $in, 0, $lf_pos ) );
  $sc_pos = strpos ( $chunk_hex, ';' );
  if ($sc_pos !== false)
   $chunk_hex = substr ( $chunk_hex, 0, $sc_pos );
  if ($chunk_hex =="") {
   $out .= substr ( $in, 0, $lf_pos );
   $in = substr ( $in, $lf_pos + 1 );
   continue;
  }
  $chunk_len = hexdec ( $chunk_hex );
  if ($chunk_len) {
   $out .= substr ( $in, $lf_pos + 1, $chunk_len );
   $in = substr ( $in, $lf_pos + 2 + $chunk_len );
  } else {
   $in = "";
  }
 }
 return $out;
}
function utf8togb($str){
 return iconv("utf-8","gbk",$str);
}

function gbtoutf8($str){
 return iconv("gbk","utf-8",$str);
}
?>

response.asp教程文件

response.cookies("a") = "anlige"
response.cookies("a").expires = dateadd("yyyy",1,now())
response.cookies("b")("c") = "wsdasdadsa"
response.cookies("b")("d") = "ddd"
response.cookies("b").expires = dateadd("yyyy",1,now())
response.write "querystring : " & request.querystring & "
"
for each v in request.querystring
 response.write v & "=" & request.querystring(v) & "
"
next
response.write "
form : " &  request.form  & "
"
for each v in request.form
 response.write v & "=" & request.form(v) & "
"
next
response.write "
url : " &  request.servervariables("url")  & "
"
response.write "referer : " &  request.servervariables("http_referer")  & "
"
response.write "host : " &  request.servervariables("http_host")  & "
"
response.write "user-agent : " &  request.servervariables("http_user_agent")  & "
"
response.write "cookie" & request.servervariables("http_cookie")
%>

index.php文件

get传数据
post传数据
向服务器发送来路信息
向服务器发送user-agent
获取服务器返回的状态
获取服务器响应头
保存图片



include("inc_http.php");
$responseurl = "http://dev.mo.cn/aiencode/http/response.asp";

$act = isset($_get["action"]) ? $_get["action"] : "";
if($act == "get"){  //get传数据

 $myhttp = new httprequest("$responseurl?a=text");
 $myhttp->open();
 $myhttp->send("name=anlige&city=" . urlencode("杭州"));
 echo($myhttp->getresponsebody()); 
 
}else if($act == "post"){ //post传数据

 $myhttp = new httprequest("$responseurl?a=text","post");
 $myhttp->open();
 $myhttp->send("name=anlige&city=" . urlencode("杭州"));
 echo($myhttp->getresponsebody());
 
}else if($act == "header_referer"){  //向服务器发送来路信息

 $myhttp = new httprequest("$responseurl?a=text","post");
 $myhttp->open();
 $myhttp->setrequestheader("referer","http://www.baidu.com");
 $myhttp->send("name=anlige&city=" . urlencode("杭州"));
 echo($myhttp->getresponsebody()); 
 
}else if($act == "header_useragent"){  //向服务器发送user-agent

 $myhttp = new httprequest("$responseurl?a=text","post");
 $myhttp->open();
 $myhttp->setrequestheader("referer","http://www.baidu.com");
 $myhttp->setrequestheader("user-agent","mozilla/4.0 (compatible; msie 7.0; windows nt 6.0; trident/4.0)");
 $myhttp->send("name=anlige&city=" . urlencode("杭州"));
 echo($myhttp->getresponsebody()); 
 
}else if($act == "status"){   //获取服务器返回的状态

 $myhttp = new httprequest("$responseurl?a=text","post");
 $myhttp->open();
 $myhttp->send("name=anlige&city=" . urlencode("杭州"));
 echo($myhttp->status . " " . $myhttp->statustext ."

"); 
 echo($myhttp->getresponsebody());
 
}else if($act == "get_headers"){  //获取服务器响应头

 $myhttp = new httprequest("$responseurl?a=text","get");
 $myhttp->open();
 $myhttp->send("name=anlige&city=" . urlencode("杭州"));
 echo($myhttp->getallresponseheaders()."

");  
 echo($myhttp->getresponseheader("server")."

"); 
 
}else if($act == "get_image"){
 
 $myhttp = new httprequest("http://www.baidu.com/img/baidu_logo.gif");
 $myhttp->open();
 $myhttp->send(); 
 $fp = @fopen("demo.gif","w");
 fwrite($fp,$myhttp->getresponsebody());
 fclose($fp);
 echo("php 仿asp xmlhttprequest请求数据代码");
}

?>


Statement
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn
php怎么把负数转为正整数php怎么把负数转为正整数Apr 19, 2022 pm 08:59 PM

php把负数转为正整数的方法:1、使用abs()函数将负数转为正数,使用intval()函数对正数取整,转为正整数,语法“intval(abs($number))”;2、利用“~”位运算符将负数取反加一,语法“~$number + 1”。

php怎么实现几秒后执行一个函数php怎么实现几秒后执行一个函数Apr 24, 2022 pm 01:12 PM

实现方法:1、使用“sleep(延迟秒数)”语句,可延迟执行函数若干秒;2、使用“time_nanosleep(延迟秒数,延迟纳秒数)”语句,可延迟执行函数若干秒和纳秒;3、使用“time_sleep_until(time()+7)”语句。

php字符串有没有下标php字符串有没有下标Apr 24, 2022 am 11:49 AM

php字符串有下标。在PHP中,下标不仅可以应用于数组和对象,还可应用于字符串,利用字符串的下标和中括号“[]”可以访问指定索引位置的字符,并对该字符进行读写,语法“字符串名[下标值]”;字符串的下标值(索引值)只能是整数类型,起始值为0。

php怎么除以100保留两位小数php怎么除以100保留两位小数Apr 22, 2022 pm 06:23 PM

php除以100保留两位小数的方法:1、利用“/”运算符进行除法运算,语法“数值 / 100”;2、使用“number_format(除法结果, 2)”或“sprintf("%.2f",除法结果)”语句进行四舍五入的处理值,并保留两位小数。

php怎么读取字符串后几个字符php怎么读取字符串后几个字符Apr 22, 2022 pm 08:31 PM

在php中,可以使用substr()函数来读取字符串后几个字符,只需要将该函数的第二个参数设置为负值,第三个参数省略即可;语法为“substr(字符串,-n)”,表示读取从字符串结尾处向前数第n个字符开始,直到字符串结尾的全部字符。

php怎么根据年月日判断是一年的第几天php怎么根据年月日判断是一年的第几天Apr 22, 2022 pm 05:02 PM

判断方法:1、使用“strtotime("年-月-日")”语句将给定的年月日转换为时间戳格式;2、用“date("z",时间戳)+1”语句计算指定时间戳是一年的第几天。date()返回的天数是从0开始计算的,因此真实天数需要在此基础上加1。

php怎么替换nbsp空格符php怎么替换nbsp空格符Apr 24, 2022 pm 02:55 PM

方法:1、用“str_replace(" ","其他字符",$str)”语句,可将nbsp符替换为其他字符;2、用“preg_replace("/(\s|\&nbsp\;||\xc2\xa0)/","其他字符",$str)”语句。

php怎么查找字符串是第几位php怎么查找字符串是第几位Apr 22, 2022 pm 06:48 PM

查找方法:1、用strpos(),语法“strpos("字符串值","查找子串")+1”;2、用stripos(),语法“strpos("字符串值","查找子串")+1”。因为字符串是从0开始计数的,因此两个函数获取的位置需要进行加1处理。

See all articles

Hot AI Tools

Undresser.AI Undress

Undresser.AI Undress

AI-powered app for creating realistic nude photos

AI Clothes Remover

AI Clothes Remover

Online AI tool for removing clothes from photos.

Undress AI Tool

Undress AI Tool

Undress images for free

Clothoff.io

Clothoff.io

AI clothes remover

AI Hentai Generator

AI Hentai Generator

Generate AI Hentai for free.

Hot Article

R.E.P.O. Energy Crystals Explained and What They Do (Yellow Crystal)
3 weeks agoBy尊渡假赌尊渡假赌尊渡假赌
R.E.P.O. Best Graphic Settings
3 weeks agoBy尊渡假赌尊渡假赌尊渡假赌
R.E.P.O. How to Fix Audio if You Can't Hear Anyone
3 weeks agoBy尊渡假赌尊渡假赌尊渡假赌

Hot Tools

SublimeText3 Chinese version

SublimeText3 Chinese version

Chinese version, very easy to use

MinGW - Minimalist GNU for Windows

MinGW - Minimalist GNU for Windows

This project is in the process of being migrated to osdn.net/projects/mingw, you can continue to follow us there. MinGW: A native Windows port of the GNU Compiler Collection (GCC), freely distributable import libraries and header files for building native Windows applications; includes extensions to the MSVC runtime to support C99 functionality. All MinGW software can run on 64-bit Windows platforms.

Atom editor mac version download

Atom editor mac version download

The most popular open source editor

Notepad++7.3.1

Notepad++7.3.1

Easy-to-use and free code editor

mPDF

mPDF

mPDF is a PHP library that can generate PDF files from UTF-8 encoded HTML. The original author, Ian Back, wrote mPDF to output PDF files "on the fly" from his website and handle different languages. It is slower than original scripts like HTML2FPDF and produces larger files when using Unicode fonts, but supports CSS styles etc. and has a lot of enhancements. Supports almost all languages, including RTL (Arabic and Hebrew) and CJK (Chinese, Japanese and Korean). Supports nested block-level elements (such as P, DIV),