How to Download and Use Odin to Flash Samsung Firmware - MiniTool

Complete Guide to Flashing Samsung Phone Firmware with Odin

This article will guide you on how to download and use Odin, a Windows program for flashing the firmware of Samsung Android smartphones and tablets, to update or repair your Samsung device.

Introduction to Odin

Odin is a practical software developed internally by Samsung, which was later leaked. It is a tool for flashing the ROM of Samsung Android smartphones and tablets, also known as Odin3, Odin Downloader, or Odin Flash Tool. It runs on a PC, communicates with Samsung devices via a USB cable, loads the firmware mirror file ("ROM") and flushes it into the device. Odin can also be used to fix the "brick machine" problem on certain Android devices.

Odin Download

Odin does not have an official download website. Although multiple websites provide downloads, there are risks in downloading software from unknown sources. At present, the source of Odin downloads that are generally believed to be safe is the XDA forum.

Steps to Flash Samsung Firmware with Odin

Step 1: Connect the device Connect your Samsung device to your computer using a USB cable. The computer will automatically install the correct USB driver and allow you to access data on the device. If the computer does not detect the device, you need to manually install the Samsung USB driver.

Step 2: Download Odin Download Odin from the XDA forum.

Step 3: Download Samsung Firmware Samsung firmware can be found in numerous reliable sources on the network. Search for firmware for your Samsung device. Samsung firmware should contain AP , BL , CP , CSC and HOME_CSC files in the format ".tar" or ".tar.md5".

Step 4: Enter Download Mode After shutting down, boot the Samsung device to Download Mode. For older Galaxy devices with capacitive buttons, press and hold the Volume Down Home Power button at the same time. For new phones, press and hold the Volume Down Bixby Power key. After 3-5 seconds, a warning screen appears, press the volume increase key to enter the download mode.

Step 5: Use Odin to flash firmware to start the downloaded Odin software ( Odin3.exe ). The COM port will light up in the Odin window. Then do the following:

• Click the AP button and select the firmware file starting with AP.
• Repeat this for BL , CP , and CSC . Note that regular CSC files completely erase device data. To preserve data, select the HOME_CSC file.
• In the Options tab, make sure the Auto Reboot and Reset Time options are selected.
• Click the Start button to start writing Samsung firmware.
• How many minutes does the brushing process take? After completion, the Samsung device will automatically restart.

Summarize

This article provides detailed steps to use Odin to flash Samsung firmware. Be sure to download the correct firmware and follow the steps carefully to avoid damaging the device.

The above is the detailed content of How to Download and Use Odin to Flash Samsung Firmware - MiniTool. For more information, please follow other related articles on the PHP Chinese website!