Is PS slow loading related to the size of the opened file?

There are many reasons for slow loading of PS: File size and format: RAW files are huge and time-consuming, while JPEG is smaller and faster; Image compression, color mode: low compression rate and high color digits will slow down loading; PS configuration: insufficient memory or improper cache settings will affect the speed; Hard disk speed: SSD is faster than mechanical hard disk; File management: A large number of files accumulated in a folder will slow down.

Many friends have encountered the problem of slow PS loading, which is really crazy. In fact, this is closely related to the size of the opened file, but it is not simply proportional to it. It is obvious that a huge, extremely high resolution RAW file will certainly load much slower than a tiny JPEG image. However, factors that affect loading speed are far more than just file size.

File format is key. The RAW file contains all the raw data recorded by the camera sensor, and the information is huge and it is naturally time-consuming to process. JPEG has been compressed, with much less information and much faster loading speed. So, with the same pixel size, the RAW file loading will be much slower. You may find that even JPEGs of the same size may vary greatly. This is because the compression method of the image and the color mode (such as 8-bit or 16-bit) will affect the loading time. The lower the compression rate, the greater the amount of information and the slower the loading speed.

The configuration of the PS itself is also crucial. If your computer lacks memory or the PS cache settings are unreasonable, it will also cause slower loading. Just imagine, it would be a disaster to process a few hundred megabytes of RAW files with only 4G memory. The PS cache mechanism is like a temporary storage space used to store data during processing. If the cache setting is too small, PS needs to read data from the hard disk frequently, and the speed will naturally slow down.

And the hard drive speed. An old mechanical hard drive has a much faster reading speed than a solid-state hard drive (SSD). If your PS file is stored on a mechanical hard drive, the loading speed will naturally be much slower. Therefore, optimizing the loading speed of PS requires many aspects to start. First, choose the appropriate picture format and try to avoid using too large RAW files. Secondly, upgrading computer hardware, increasing memory and using SSD hard drives can significantly increase speed. Again, set the cache size of PS reasonably and clean the cache regularly. Finally, develop good file management habits and avoid stacking too many files in one folder.

For example, I once met a client whose PS was always stuck and he had to wait for a long time to open the file. After inspection, it was found that his PS cache settings were extremely small, and the computer memory was insufficient, so the hard disk was still an old mechanical hard disk. We helped him upgrade the memory, change the SSD, and adjust the PS cache settings, and the problem was solved.

In short, the slow loading speed of PS is a systematic problem, and it needs to be considered in multiple aspects such as file format, computer hardware, and software settings. Only by finding the bottleneck can we effectively solve the problem and improve work efficiency. Remember, prevention is better than treatment. Only with good computer configuration and reasonable software settings can you travel unimpededly in the PS world.

The above is the detailed content of Is PS slow loading related to the size of the opened file?. For more information, please follow other related articles on the PHP Chinese website!