Home >Computer Tutorials >Troubleshooting >MSI Dragon Center BIOS Update Black Screen: Try 5 Instant Fixes

MSI Dragon Center BIOS Update Black Screen: Try 5 Instant Fixes

Linda Hamilton
Linda HamiltonOriginal
2025-02-09 20:01:08977browse

Encountering a black screen after updating your MSI Dragon Center BIOS? This MiniTool guide offers five solutions to resolve this frustrating issue. Before attempting any fixes, ensure you've thoroughly read the instructions.

Troubleshooting MSI Dragon Center BIOS Update Black Screen

Method 1: Patience is Key

A black screen after a BIOS update isn't always a disaster. Wait at least five minutes. If your system remains unresponsive, perform a hard shutdown by holding the power button for ten seconds. Check functionality after restarting. If the problem persists, proceed to the next solution.

Method 2: CMOS Reset

This involves resetting your computer's CMOS (Complementary Metal-Oxide-Semiconductor) settings. There are two approaches:

  • CMOS Battery Removal: Power down your computer, unplug it, open the case (desktop) or back panel (laptop), locate the CMOS battery, remove it for 5-10 minutes, then reinsert and power on.
  • CMOS Jumper: (Desktops only) Consult your motherboard manual to locate the CMOS jumper. Move the jumper to the "clear" position for 5-10 seconds, then return it to its original position. Reboot your system.

Method 3: BIOS Default Settings

If the system powers on but the screen remains black, resetting your BIOS to its default settings might resolve the issue.

  1. Power off and then on your computer.
  2. Repeatedly press Del or F2 during startup to enter the BIOS setup.
  3. Reset BIOS settings to defaults and save changes.
  4. Restart your PC.

Method 4: USB BIOS Flashback

A corrupted BIOS update is a likely culprit. Re-flashing the BIOS using a USB drive is necessary:

  1. On a working PC, download the latest BIOS file for your motherboard/laptop from the MSI support website.
  2. Extract and rename the file to MSI.ROM.
  3. Copy MSI.ROM to the root directory of a USB drive.
  4. Power off your computer and connect the USB drive to the BIOS Flashback port.

MSI Dragon Center BIOS Update Black Screen: Try 5 Instant Fixes

  1. Press and hold the BIOS Flashback button for 3-5 seconds. The flashing process (5-10 minutes) will begin automatically.
  2. Restart your computer upon completion.

Method 5: Verify Display Connection

Ensure your monitor is correctly connected to your motherboard or GPU. Try a different display port (HDMI, DisplayPort). If you have a dedicated GPU, test connecting the monitor to the motherboard's HDMI port.

Data Backup Recommendation: Before implementing these solutions, it's strongly recommended to back up your crucial data. This safeguards against potential data loss. MiniTool ShadowMaker is a free backup solution you can explore.

If none of these methods work, contact MSI support for further assistance.

The above is the detailed content of MSI Dragon Center BIOS Update Black Screen: Try 5 Instant Fixes. For more information, please follow other related articles on the PHP Chinese website!

Statement:
The content of this article is voluntarily contributed by netizens, and the copyright belongs to the original author. This site does not assume corresponding legal responsibility. If you find any content suspected of plagiarism or infringement, please contact admin@php.cn