usb shared network card?

Want to know how to use a USB shared network card? PHP editor Yuzai brings a solution to everyone. This detailed guide will explain what USB network cards are used for, how to set them up, and tips for troubleshooting any issues you may encounter. Read on to learn more and implement your tethering needs with ease.

1. Is the USB shared network card?

USB shared network card is very stuck. Similar problems occur after sharing the USB network of mobile phones to desktop computers. It is not a problem with the mobile network, nor is it a problem with the USB device driver selection on the computer.

There is a problem with the response of the computer itself. Especially the data network protection mechanism under Win10 system will allow machines that suddenly access the network to wait for a certain period of time. After "waking up" the network, continuous access to the network will be quickly without delay. But once you don't access the network to do other things, the network will immediately enter the "standby" state within two or three minutes to prevent rapid consumption of background traffic.

This situation currently only occurs after the USB network is shared from the mobile phone to the desktop. There is currently no setting option that can solve this situation of waiting for a countdown to wake up the network.

2. How to set up USB sharing network computer sharing?

USB sharing network computer setting sharing method, to set up USB sharing network, you need to connect your phone to the computer with a data cable first. The steps are as follows:

1. Go to "Settings>More (Wireless and Network)>Mobile Network Sharing;

2. Click "USB Sharing Network" and turn it on. Instructions : 1. When sharing the mobile network through USB, the mobile phone will not be used as a USB storage device. 2. If there is a wireless network card on the PC, you can use the mobile phone to turn on the WLAN hotspot, and the PC will connect to the mobile phone through WLAN to access the Internet (currently supports Windows operating system). .

3. When using USB shared network to access the Internet, you must turn on the data connection, otherwise you will not be able to access the Internet.

4. The data consumption of Internet access on the computer is higher than that on the mobile phone. It is recommended to use the mobile phone with sufficient data. In this case, turn on this function.

3. The USB shared network computer is not responding?

1. On the computer, right-click on this computer - Properties. Click Device Manager on the interface.

3. You will see a yellow exclamation mark in the explorer, which means the driver installation failed.

4. First enter the phone settings and click on the settings on the phone.

5. Find the developer options in the settings interface.

6. Turn on the developer options switch.

7. Click the OK button when prompted by the system. 🎜>8. Then update the driver.

4. How to share the network with the computer?

USB itself cannot share the network with the computer directly, but it can be achieved by connecting a USB network card. . The following are the specific steps:

1. Purchase a USB network card that meets the computer and network requirements.

2. Plug the USB network card into the computer's USB interface. Install the USB network card driver on the computer.

4. Set the network connection information of the USB network card, such as IP address, subnet mask, default gateway, etc.

5. Connect to the network. And test it.

It should be noted that the performance and signal quality of the USB network card have an impact on the speed and stability of the shared network, so you should choose products with reliable quality and minimize signal interference and avoid physical obstacles. . In addition, you need to comply with network security regulations when sharing the network to protect the privacy and information security of yourself and others

5. USB shared network settings

USB shared network settings operation steps

USB shared network setting is a convenient and practical function that allows you to share a computer's network connection with other devices through a USB connection. This is very useful for devices that do not have independent network connections, such as wireless routers. Game consoles, etc. Below we will introduce you to the detailed steps of USB sharing network setup

Step 1: Preparation

Before starting the setup, make sure you have the following equipment ready:

A computer with network connection and a USB cable need to use a shared network device

Make sure your computer is connected to the Internet and can access the web page normally.

Step 2: Enable the shared network function

To enable the USB shared network function on your computer, you can follow the steps below:

Open the computer's settings interface and find the network settings option . In the network settings options, click "Shared Network" or a similar function option. In the shared network settings, find the "USB Shared Network" option and enable this feature.

If you cannot find the USB sharing network option, please check the manual of the computer you are using or search for relevant tutorials online.

Step 3: Connect the USB cable

Plug one end of the USB cable into the USB interface of your computer, and the other end into the USB interface of the device that needs to share the network.

If your device does not have a USB port, you can use a USB adapter or adapter to connect it.

Step 4: Set up a shared network connection

The specific steps for setting up a shared network connection may vary depending on different operating systems. The following are the setting methods for two common systems, Windows and Mac OS:

Windows system

Open your computer’s “Control Panel” and select “Network and Sharing Center”. In Network and Sharing Center, click Change adapter settings. In the adapter settings interface, find the network adapter used by your computer, right-click the adapter and select "Properties". In the adapter properties, click the "Sharing" tab and check "Allow other network users to connect through this computer's Internet connection." Save the settings and close the window.

Mac OS system

Open "System Preferences" and select "Sharing". In the sharing settings, find the "Internet Sharing" option. In the Internet sharing settings, select "USB Sharing Network". In the shared network settings, check "Share Ethernet over USB". Save the settings and close the window.

Step 5: Test the network connection

After completing the above settings, you can test whether the network connection is normal. Make sure the device sharing the network is connected to the USB port of the computer and open the device's network settings.

If everything goes well, your device will be able to connect to the Internet via USB tethering and access web pages, apps, etc. normally.

Notes

When using the USB shared network function, you need to pay attention to the following points:

The computer sharing the network needs to be turned on all the time and maintain the USB connection. Shared networks may reduce your computer's network speed and performance. Shared networks may consume more battery power on your computer.

In view of the above precautions, it is recommended that you use the USB tethering function when necessary and turn it off promptly after use.

Summary

USB shared network setting is a function to share a computer’s network connection with other devices. With simple setup and connection operations, you can easily provide network connectivity to other devices. In actual applications, you may need to make corresponding settings based on the specific computer and operating system. Remember to turn off the shared network function after use to avoid unnecessary waste of resources.

6. Is the mobile phone USB sharing network used to play LOL card on the computer?

I just open the hotspot on my mobile phone and play lol. Most of the time, there is no lag, but sometimes the delay is thousands of dollars per card, and some areas are stuck and some are not, such as Zaun and Noxus. Very stuck

7. How to share the network between an Apple phone and a computer via USB?

I’ll update this because I’ve been searching for a long time and haven’t found a satisfactory answer.

When there is no network at all, the desktop computer needs a wireless network card to operate the wireless network card (it is cheap for about 20 yuan. I bought 3 of them before and used them for about 2 years, and only one broke. Now I Desktop computers have also been using wireless network cards).

The notebook can first use the mobile hotspot to connect to the Internet.

1 Download the software pp assistant on the computer, install and run it 2 Connect the computer with the mobile data cable (the mobile phone will pop up two windows, first click Trust and second enter the mobile phone lock screen password) 3 An iTunes will be automatically installed (emphasis added) It’s this plug-in) 4. After installation, unplug the data cable 5. Turn on the mobile phone’s personal hotspot (under normal circumstances, the mobile phone or computer cannot search for WiFi after turning on the hotspot on the phone. If you turn off the hotspot and then turn it on, it will not be able to search for WiFi) 6. Plug it in Automatically connect to the network after the data cable.

Here’s why we need to search for WiFi hotspots after connecting. After turning on the hotspot, the phone becomes hot and consumes power.

Ask me if you don’t understand.

My mobile phone is Fruit 8 and my computer system is Win10.

8. The USB sharing network of Apple mobile phone is not responding to the computer?

The iPhone shares the network with the computer through USB. The prerequisite is that the computer has the relevant drivers provided by Apple installed. Generally, the easiest way for us to install the official driver is to install iTunes, because the driver is included in the iTunes installation package.

If the driver on your computer is intact and the phone can connect to iTunes normally, but it still cannot share the network to the computer via USB, then you can troubleshoot the problem from the following two points. Note that these are just the most likely questions I have summarized based on my own experience, not all of them.

The installed iTunes version is too low, resulting in the driver version being too low.

Try to install a new version of iTunes. The version I am using is 12.6.5.3 (not the latest version). The computer system is Win11 and the mobile phone system is iOS 15.6. It is shared with the computer through USB network and it works normally.

iTunes 12.6.5.3 official direct link download address

Backup iTunes historical version download

2. Driver conflict.

Here is an example of an actual situation I encountered. I could use USB to share the network with my computer normally, but suddenly one day I couldn’t use it anymore. After repeated investigations, it was found that the cause was the installation of a screencasting software. The screencasting software uses a USB connection to cast the screen, but it needs to install a USB driver. It is this driver that conflicts with the original iTunes driver, resulting in the inability to use USB to share the network. , can only cast the screen.

The solution is relatively simple and crude. Uninstall the driver installed by the screen mirroring software and return to normal. Regarding uninstalling the driver, it is recommended to use a third-party tool to get started. I was using Aisi Assistant at the time, and used "iTunes and Drivers > Driver Advanced Repair" in the toolbox to uninstall the old version of the driver file, and then restart the computer.

Of course, you can also use the command line to uninstall the driver. Taking Windows as an example, we can use the PnPUtil command. Relevant documents can be consulted by yourself. PnPUtil Example - Windows drivers

9. How to set up USB sharing network on the computer

Normally, we use a USB cable to connect the device to the computer for data transfer or charging. However, you might not know that USB can also be used to share network connections. This means you can share a network connection with your computer from a device connected to the Internet via USB tethering, such as a phone or mobile hotspot.

So, how to set up USB sharing network on the computer? Below you will find a step-by-step guide to help you easily set up a USB tethering network connection.

Step 1: Check the compatibility of your device and computer

First, you need to make sure that both your device and computer support the USB tethering function. You can check the user manuals for your device and computer or visit the manufacturer's website for more information.

Step 2: Connect your device to your computer

Connect your device to your computer’s USB port using a USB cable. Make sure the connection is tight and not loose.

Step 3: Open network sharing settings

On your computer, open Control Panel and select Network and Internet Links.

Next, select the Network and Sharing Center option.

Under "Change Adapter Settings" find your device connection.

Step 4: Set sharing options

Right-click on the device connection and select the Properties option.

In the Sharing tab, enable the "Allow other network users to connect through this computer's Internet connection" checkbox.

Next, select the network connection you wish to share with from the Home Network Connection drop-down menu.

Step 5: Save settings and enable shared network

Click "OK" to save settings and close the properties window.

Then, right-click on the device connection and select "Enable". This will enable USB tethering functionality.

Step 6: Connect other devices

Now you can connect other devices to your computer via USB shared network connection.

Please note that you may need to enable tethering or configure network settings for the connected device.

Summary

Through the above steps, you have successfully set up a USB shared network connection. Now you can easily share your network connection with other devices without the need for a separate Wi-Fi router.

Please keep in mind that USB tethering may have some impact on the speed of your device. In addition, please pay attention to security when sharing network connections, and make sure your devices and computers are protected by a reliable firewall.

Whether you are sharing a network connection with family members in a home environment or sharing a connection with friends while traveling, the USB tethering feature is a convenient and practical option.

10. Sharing USB network from Huawei mobile phone to computer?

Yes. The following are the specific steps:

Open "Settings" on your Huawei phone and find the "More connection methods" or "Network & Internet" option.

Click "Tethering" or "USB Tethering" and turn it on.

Now, connect your Huawei phone to the computer via USB.

The computer will automatically install the required drivers, which may take a few minutes.

Once the computer detects the phone, it will prompt you if you want to share the network connection between the phone and the computer.

Click "Yes" or "Allow" and wait a few seconds until the computer successfully connects to the Internet.

Now, your computer will be able to connect to the Internet through your Huawei phone. Please note that connecting to the Internet through this method may consume more mobile data. It is recommended that you check your data plan and obtain tariff details before using this feature.

The above is the detailed content of usb shared network card?. For more information, please follow other related articles on the PHP Chinese website!